I cannot access books in my collections starting from D to Z

My collections only shows authoe from a to c.
Where are the books

I have this problem too. I can still get to the collections by swiping across the bookshelf but not from the list. From other discussions it looks like there’s a limit on the number of collections: https://discussions.apple.com/message/23794822#23794822.
May not work for you, but I moved books out of some of my smaller collections and then deleted those collections. That way I can access the collections farther down the list. If you don’t want to delete collections, the books still show up in search.

Similar Messages

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back-up app.

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
Have used Superduper app. to back up and checked back-up occasionally to see if all files present and appeared OK.
I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
Running iMAC System 10.4.11
How can I successfully download from the Maxtor back-up?
Ivan

Further info.
I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
Solved the Stickies problem by using Spotlight to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
Re Ical data loss. Used Spotlight to find iCal document in Library - Preferences where I found com.apple.iCal.plist in folder.
Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
So now I cannot tell which is the symbol iCal.plist
Thanks for leading me so far, but how do I find that plist for my calendar?

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

I cannot get the photoshop download to start from the order page - any ideas?

i cannot get the photoshop download to start from the order page - any ideas?

Brookie_g75093 I would recommend trying the steps listed in I can't download a purchased product from the Adobe.com Store.

I cannot access all of the gmail messages from my Ipad that I can from my laptop. What gives?

I cannot access all of my gmail messages from my Ipad that I can from my laptop. I have a folder with 27 messages in it, but when I access that folder on my Ipad, only one message shows.

Barbr6322 wrote:
How do I set as iMap?
How is it set now?

Cannot access shared external drive on iMac from Windows 7

Used to be able to access this drive with no problem from any of my PC's. Sent iMac in for repair and system drive was wiped so I'm starting from clean install of Leopard. Did all the updates first including 10.6.4 which wasn't on before the system drive died.
Firewall is off
SMB is on
Everyone as well as main user has read write access to external drive
iMac is in the same workgroup as machine, although it wasn't before and it worked fine.
PC can ping the IP of the iMac and get a response, can see the iMac in list of networked computers
but cannot access anything on it.
Windows 7 network diagnostics says "file and print sharing resource (JMGIMAC) is online but isn't responding to connection attempts" "The remote computer isn't responding to connections on port 445
I've tried everything, any ideas
Josh

I am familiar with the instructions for sharing files and have followed them (several times I might add).
My problem is that the information that I place in the WINS tab ( in the Network Preference Pane) disappears when the iMac is re-started. This information (especially the Workgroup name) must appear when the computer re-boots. It doesn't and I have to re-enter the information in the iMac before I can access its files from a Windows PC.
I have searched the internet for days trying to find an answer to this question. Although the problem seems to be fairly common, no solutions have been found.

I cannot access my multi-function DAQ hardware from VB/Meas Studio after upgrading to latest Meas Studio Version and NI-DAQmx

I have a farily complex project that was initially written in VB6.0 with Meas Studio 3.0 and using traditional NiDAQ. For seveal reasons, I wanted to upgrade to the latest NI software. So, I purchased the latest version of Meas. Studio. I installed this, along with NI-DAQmx. Now, I cannot access any of the hardware from the VB IDE / Meas. Studio DAQ objects. Nor can I get the installed examples to run. The test panels run ok from MAX.
The whole process of trying to do this upgrade process has been extremely confusing and frustrating. I have a support request in, but have yet to hear from anyone. Trying to get useful information on this problem from the NI web site has also been difficult since almost all of the support doucments of any detail reference Labview.
Any help will be appreciated.

I'd like to better explain the decision not to provide ActiveX controls for DAQmx. My intention is not to de-legitimize your concern or downplay the pain/inconvenience this caused you.
The decision not to provide ActiveX controls would be more accurately summarized as a cost/benefit decision.
DAQmx is an entirely different API. The choice not to support mx with ActiveX controls was not a matter of dropping support from an implementation perspective (I understand that from a product-offering perspective, it is dropping support). Rather, the choice not to support mx with ActiveX controls was a matter of not designing and implementing an entire new set of controls.
Given our resources, we have to make choices about what languages (C#, VB.NET, C++, VB6), frameworks and versions (.NET 1.1, .NET 2.0, ASP.NET, MFC 7.1, MFC 8.0, VB6), and development environments (VB6, VC6, VS2003, VS2005) that we support. When NI decided that mx was necessary (that is, we could not move forward with new hardware under the old Traditional DAQ API), the Measurement Studio team had to decide which of these languages/platforms/ADEs to support.
We view the ActiveX controls as native support for Visual Basic 6.0. In March of 2008, Microsoft is going to stop supporting Visual Basic 6.0 (http://msdn2.microsoft.com/en-us/vbrun/ms788707.aspx). It was largely because of this that we did not feel that our customers, as a whole, would gain enough benefit from us developing ActiveX controls to justify the cost. Instead, we developed native .NET and C++/MFC libraries for DAQmx.
We developed the type library for mx because we did understand that some customers would want or need to use mx boards in existing VB6 systems. While this is not an ideal solution, we hoped that it would be good enough. I am sorry that it doesn't meet your needs.
Looking back, we see that our customer base has not moved away from VB6 and to VB.NET or C# as quickly as we thought they would. This is why the Measurement Studio product continues to include VB6 support (the UI and Analysis ActiveX controls that you mention) and why we continue to fix bugs in these components. However, we are not putting much effort into developing new features in these ActiveX controls. Almost all of our new feature development efforts are in the .NET libraries.

I cannot access my /User/Dennis/Pictures folder from Bridge

I has the CS3 Suite, I am trying to see some files in the above path on my C: Drive, but for some reason I cannot access thru Bridge.
If I go to PS and choose File/Open then I can navigate to that folder and open files, but I really would liket to do so with Bridge so I can open images in Camera Raw.
I've checked all my folder settings I could think of to ensure access to all, but that did not make that folder even 'visible' in Bridge.
Any words of wisdom?
Thanks
Dennis

No. I did pull some folders in from an external Raid drive onto
my C: \Users\Dennis which was already on my C: Drive forever.
There are 3 Folders under User, 1)Default, 2)Dennis 3)Public and the only one Bridge finds is the Public Folder.

I cannot access the pictures on my iPhone from my PC anymore?

For some reason I can no longer access the pictures on my iPhone from my WIndows PC. I used to be able to navigate us explorer to the files and download them to my desktop. A possibly related glitch is that when I connect the iPhone with the cable via the USB port windows says it's recognized and properly installed the device drive...however the device does not apeear under "My Computer" the device show up on iTunes on the PC but I cannot navigate to the picture. Can someone please help me?
Thank you,

Thanks for update.
Can you look into the bottom dock connector, and clean it with jet of air, also look if any pins/wire is not straight. My suspicion is that, the USB interface signal pins, 25 and 27, D- and D+, is not communicating with the iPod, especially pin 25.
If cleaning doesn't work, then bring it to any 3rd Party iPod Repair, to let them have a look or replace the bottom dock or whatever they find out of place.
Oops sorry, I forgot the basic
Can you Reset the iPod.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/

I cannot access the itunes store any longer from my PC. Why

I downloaded the Itunes update 11 on Dec 21 and I have not been able to see the the Itunes store since then; I can see my music etc. but I cannot access the store.

No - it just comes up with a blank page. I've tried signing on, and nothing happens. do you think maybe something on my control pad is not set correctly? It seemed to happen after I upgraded iCloud

I cannot access my Add-ons Collections account that I just registered, and I never received the confirmation email.

I created an account, username "dleemaas" with the email address "[email protected]". I never received the confirmation email, and when I try to have the website send a password reset email, I do not receive that either; I am assuming that I must have mistyped something into the email address field when creating the account. How can I access my account?

There's no link to contact the board administrator, as the help section at that forum suggests to do, and I can't login in the first place in order to post a question to ask how I'm supposed to be able to access my account. Any suggestions?

Cannot access Bitvise server on port 22 from 871W

I am pretty new to Cisco gear and a newbie at ACLs but here goes...
here is the ouput from #sh ip access-lists
Standard IP access list 1
    10 permit 192.168.1.0, wildcard bits 0.0.0.255 (1993 matches)
Extended IP access list FILTERNET
    10 permit tcp 111.222.333.0 0.0.0.255 host 192.168.1.42 eq 22
    20 permit tcp 192.168.1.0 0.0.0.255 any eq www
    30 permit tcp any host 222.333.444.555 eq www (135 matches)
    40 permit tcp 111.222.333.0 0.0.0.255 any eq telnet (2964 matches)
    50 permit tcp 222.333.444.555 0.0.0.7 any eq telnet (5328 matches)
    60 permit tcp any any established (125628 matches)
    70 permit udp any any (2833 matches)
    80 deny ip any any (258 matches)
access list 1 is of course for nat... and all of the clients can access the WAN just fine
FILTERNET is intended to, among other things, forward port 22 traffic from 111.222.333.0 0.0.0.255 to 192.168.1.42 where Bitvise is running and listening on port 22. This is a applied to FastEthernet4 as: ip access-group FILTERNET in
I have 8 static public IP addresses and this works fine with my Linksys WRT54G when he's running the show, so I know that the setup in Bitvise is solid...
I can telnet in from 111.222.333.xxx and 222.333.444.xxx just fine but I cannot connect to Bitvise; what puzzles me is the show ip access-lists does not show any packets allowed in on port 22 and the 80 deny any any is counting up each time I try to log in so I can only assume it is denying port 22. However, from Line 40 I see that same outside address is successful in bringing telnet traffic in.
I have ssh on the vty lines shut off right now on the 871W, by the way. Also, I can choose a different port for Bitvise to listen on and can log in from that port if that would cure it, I didn't think about that until just now... does the router block port 22 no matter how the ACL is set if ssh is shut off on the vty lines?
Thanks in advance,
-Gary

OK, I got it sorted out, it wasn't as much a problem with NAT as it was with my ACL...
ip nat inside source list 1 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.1.42 22 interface FastEthernet4 22   <-- using ONLY port 22 of the outside address
ip access-list extended FILTERNET
permit tcp any any eq 22                                           <-- opened this up; letting the static nat handle this port
permit tcp xxx.xxx.xxx.xxx 0.0.0.255 any eq telnet      <-- an external subnet that I trust
permit tcp xxx.xxx.xxx.xxx 0.0.0.7 any eq telnet         <-- another trusted subnet
permit tcp any any established                                   <-- only connections that I initiate are allowed
permit icmp any any                                                  <-- for now, allowing pings
permit udp any any                                                    <- some things just would not work w/o this
deny   ip any any                                                      <-- implied, I know, but this way I can see the count
access-list 1 permit 192.168.1.0 0.0.0.255
works like a champ now! Thanks for the help!!

SSRS 2012 - Cannot access any of the sub page from Report Manager - Manage page menus.

All:
It was working at one point of time, but suddenly when I tried to access any of the menus from Report Manage page, all the options (Data Source, Subscriptions, Processing Options, Cash Refresh Options, Report History, Snapshot Options, Security) will
redirect back to the root directory page.
Because of this problem, I cannot manage any of the options or subscriptions for any of my report on the server.
Does anybody know what could be the problem? Thank you very much for your help.
Tina

Hi Tina,
As per my understanding, I think this strange issue can be caused by the browser which running Report Manager and the page files may be corrupted which are related to manage properties in Report Manager.
As to the browser, if you use IE explorer to run Report Manager, I suggest that you can try to run it in compatibility mode. If you are using another browser, I recommend that you should use IE explorer to run Report Manager to check the issue again.
Another possibility is related to corrupted page files. If in this scenario, I suggest that you can try to copy the all Pages folder from another server which works well to replace the current one. By default, the Pages folder is located in the following
folders:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportManager
Besides, if this issue still exists, you can go to Reporting Services Log Files to see if there are error messages. Then it may help us make further analysis.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Mac Book Pro won't start from hard drive when turned on

I have a new 15 in Mac Book Pro with 10.8.1. When I turn it on it always boots to the disk utilities rather than my harddrive. I select my startup disk and reboot. It starts fine. But when I shut it off the same sequence repeats. I have verified my drive and selected the hard drive as my startup disk.
What is happeneing? What should I try?

Step by Step to fix your Mac

I cannot access my hotmail/windows live account from my home computer I get an error message, but accessing with another computer is no problem what can I do?

I have restarted the home computer several times and updated to firefox 4.0 I checked for enabling and disabling cookies and it says that 3rd party cookies are accepted and to keep until they expire

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I cannot access books in my collections starting from D to Z

Similar Messages

Maybe you are looking for