I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

I cannot detect my wireless HP desk jet 3520 printer from my iPad?

I can't find an Arris router with that model number, are you sure it is not a TG862?
Regardless, Arris routers are known to either be incompatible with Bonjour or have problems with Bonjour packets hence Airprint will not work. Check with Arris' website and see if there is a firmware update availble for your router for Bonjour/Airprint compatibility and install it or switch out your router.

Similar Messages

HP Officejet 8600 Cannot install software because printer is not detected on the wireless network

Hello,
recently I faced an issue with my new HP Officejet N911a: when trying to install software & drivers, I get an error "printer is not found on the network". Here is my setup and what I tried already:
- printer is connected to home wireless network (there is solid blue light on the printer etc). It has an IP address 192.168.x.x
- Windows 7 (64-bit) Lenovo laptop is connected to the same wireless network
- I don't have any MAC filtering
- I broadcast my SSID and have WPA-PSK
- I have default Windows 7 firewall
I was installing the latest drivers from HP website, but when it comes to installation, software never "sees" my printer on the network. I'm able to ping it and access from Windows explorer (by typing printer's IP address \\192.168.x.x).
I can install the printer via "Add printer", and wireless printing works fine, but in this case I'm unable to scan (error message is "Scanner communication cannot be established"). So I assume, that for scanning, I definitely need HP software.
If I connect the printer via USB to my laptop, software installs and I can scan without any issue. However, I would like printer to work wirelessly...
Does anybody have any suggestions?
Thanks!

Hi,
I don't have a similar printer to check but for few models the default scan to computer is Disabled, please don't ask me why. And we, users, have to enable this by:
Double click printer icon on desktop,
Click Manage Scan to Computer,
Click Enable
You may want to tick the last square too.
New software update may remove this option, please use HP Scan from All Programs > HP > HP [your printer] > HP Scan
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

"An error has been detected with a required application library and the product cannot continue. Please reinstall the application.

I have received the following error message from my Adobe Acrobat Pro X1 after installing the CS6 package :, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
I am now unable to open any pdf?
Any words of advise here how to fix this problem?
Thanks!

** Moved to Acrobat Forums for quicker and accurate resolution steps ***

An error has been detected with a required application library and the product cannot continue. Plea

I am getting the following error each time I open Adobe Acrobat 7.0 Professional...
"An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have tried uninstalling and then reinstalling the program. It didn't help, got the same error shortly after opening the program.
What is strange is that the problem just suddenly appeared therefore, I believe that it may have been malware related causing this problem. And I have had this program and have been using it without any problems now for over 3 years.
It appears that a vital part of the program is being blocked.
Can anyone please help and offer a detailed solution to this problem? Maybe someone has already encountered it.
Thank you!
-Dan Sacapano

Anoop,
Upon re-reading that information, I am curious as to why your believe that this will solve my issue. That is not related to my error message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have not received any such message as the one seen on that page.
Please explain why I wouldn't have gotten that partcular message and instead got the one I quoted above?
Thank you,
-Dan

Alert! The page yu are trying to view cannot be shown because an erros in the data trabnsmission was detected. What is causing this error?

when visiting the website www.ontwowheels.nl I get the error:
Alet. The page you are trying to view cannot be shown because an erros in the data transmission was detected. I than have to clear my history before I can see the page once. After a visit I get the Aleret again. What can cause this error? When I use IE there is not such a problem. Also when I use IE TAB all is fine

From the http log: 
 
nsHttpTransaction::ParseHead [count=236] 
nsHttpTransaction::ParseLine [HTTP/1.1 304 Not Modified] 
nsHttpResponseHead::ParseVersion [version=HTTP/1.1 304 Not Modified] 
Have status line [version=11 status=304 statusText=Not Modified] 
nsHttpTransaction::ParseLine [Content-Type: text/html] 
ParseContentType [type=text/html] 
nsHttpTransaction::ParseLine [Content-Length: ] 
invalid content-length! 
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d] 
nsHttpConnectionMgr::ReclaimConnection [conn=d1e980] 
STS dispatch [3b04b20] 
nsHttpConnection::CloseTransaction[this=d1e980 trans=4e23aa0 reason=804b001d] 
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d] 
 
Firefox is receiving malicious content-length 
Reason 804b001d ->> NS_ERROR_CORRUPTED_CONTENT 
A transport level corruption was found in the source document. for example 
a document with a calculated checksum that does not match the Content-MD5 
http header.

HT4505 I'm trying to install neat desk. It said you cannot install neat on this volume. What do that mean

I'm trying to install neat desk. It said " you cannot install neat on this volume". What does this mean? I do have the neat desk for the mac.

http://www.amazon.com/NeatDesk-Desktop-Scanner-Digital-Macintosh/dp/B0026IBMK6
says:
Mac OS X v10.6 or later
Mac computer with an Intel processor
1 GB of RAM; 3 GB recommended
256MB of available disk space for installation,
1GB recommended for user data
CD-ROM or DVD drive required for installation
Available USB port
It could very well be they only tested it up to Mac OS X 10.6.1. Contact Neat Desk and ask them what they have tested it on.

I cannot get icloud to open for my feddly pro. I apid for feedly pro on my desk top and now I cannot use it on my other devices

I cannot open icloud with my feedly pro. I set up my account on my desk top and now cannot get it to open all of the blogs on my other devices

Feedly Pro has absolutely nothing to do with iCloud.
Contact Feedly if you're having problems with their product.

Cannot install on this Disk, no previous installation of OS X detected

Hi,
today I tried to install OS. I took install CD 1 (original Mac OS X Panther v10.3) and I ran Disk utility - made new partition and erase disk (I want clear new installation and I don't need old data).
Then I ran installation and then I got this message:
Cannot install on this Disk, no previous installation of OS X detected
Why does it need previous installation? I want to make new Install. How can I make it?
Thanks a lot!

CDs looks the same, but in the first CD is under Install Disk 1 write "Upgrade".
As I wrote, I have 3 CDs - black with silver X, which I got with my computer. On CDs is Panther 10.3 which was pre-install in my computer too and which I erased.
From Pogue's "Mac OS X: The Missing Manual, Panther Edition":
When you buy Panther from a store, you get the installer described on these pages—the one capable of performing either an Upgrade installation or an "Archive and Install" (that is, a clean install).
You may have received a different set of CDs, however, thanks to Apple's Software Up-to-Date program. (That's where you pay only $20 or so for the upgrade—an consolation prize offered to people who bought a new Mac only a few weeks before a major new Mac OS X version comes out.) You'll know if you have this set, because Disc 1 bears the label Upgrade Disc.
Trouble is, there's no Archive and Install option when you run this installer. After all, these discs are intended to upgrade the copy of Mac OS X that's already on your new Mac.
That doesn't mean, though, that you can't perform a clean install at all. If you use the Erase and Install option, you do indeed get a clean installation of Panther. You'll have to re-create your accounts and settings, but at least you'll wind up with the considerable stability benefits of a clean installation.
It may be that your machine was "pre-upgraded" before you received it, and you got the Panther upgrade disks but weren't also given a set of the original Jaguar disks.
Try the installation again, and when you get to the Select a Destination screen, see if there is an Options button. If so, click it, and see if you can get to an Erase and Install option.

I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC. Printer worked fine with Netgear previously. With USB from printer direct to Laptop it will print. The printer is definitely set up correctly to acknowledge the router. W

When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
Can anyone offer advice? Thanks.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

HP Laser Jet 400 colorMFP M475dw Will Not Scan Wirelessly

My printer/scanner will not connect wirelessly to any of the computers it used to connect to. It just stopped printing and scanning. I would appreciate any assistance you can provide. Perhaps instructions on how to uninstall and reinstall the printer software would work?

Hello ElizabethF,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot print wirelessly from Windows 7 (64 bit) laptop to Officejet 6000 Wireless (E609n)

The printer is a HP Officejet 6000 Wireless (E609n) and is connected via usb to a Windows 7 (64 bit) desktop and the laptop has Windows 7 (64 bit) loaded.
No changes were made that I'm aware of other than the usual Windows updates.
Server is offline is displayed next to the printer icon on the laptop when printing is attempted.
The wireless network test report shows no problems.
I have rebooted the desktop and printer with no success.
The laptop used to print wirelessly without a problem.

I am not sure the Officejet 6000 can have both the wireless and USB ports active at the same time. You could try disconnecting for the USB cable and then power cycling the printer and trying to connect wirelessly. If you have the desktop connected to a router that also provices wireless capability you could connect the desktop with the network connection.
One other thing you might consider is sharing the printer on your network from the desktop computer. Next on the laptop computer do the following: go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then select HP (not Hewlett-Packard) for the manufacturer and select the appropriate HP Officejet 6000 series model.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1510 printer not being detected by my windows Visa

I recently bought an Hp 1510 printer and after installing the software i tried connecting the printer with my laptop with windows vista(home version) as the operating software. However the printer does not even get detected after connecting it via the USB drive. The USB drive works fine when i use other external devices but cant seem to detect my printer. Please help...

I have been able to make some changes by reinstalling the software. As of now the Printer is being detected by my laptop(Windows vista OS), I can scan and can also print diagnostic information through the HP desktop 1510 series toolbox however i still cannot print word documents. Infact I can't seem to do any printing process. Whenever I try to take a print out a word document file the following error messages occur.
"Windows cannot print due to a problem in the current printer setup.
This error can appear if a default printer has not been designated or if the application is unable to locate an existing default printer. To correct this problem, try one of the following in Microsoft Windows:
If a printer is not available in the Print dialog box, add a printer.
If the application cannot find an existing printer that is already installed, set the printer as the default printer.
If a default printer is installed but the application is unable to use it, uninstall the printer driver, and then install the latest version of the printer driver.
If the printer is on a print server, make sure the printer is available, the network is functioning, the server is not stalled, the printer is not out of paper, or the printer is not suspended by the administrator. Printing issues associated with a network printer are best handled by your local network administrator".
It also shows an error that printer is not installed.
I'm perplexed by this issue. I have ensured that the printer is the default printer, I also updated the latest driver software, I can also scan which shows that the Operating system can clearly detect the printer, I can also print diagnostic info from the printer toolbox. The only think I can't do, it seems is Print. Please help me out. All the relevant info about the printer is given below. Thank you.
Model name: Deskjet 1510 All-in-One Printer series
Flimware Version: CGP1FN1307AR
Serial Number: {Personal Information Removed}
IK number: 509-20140126-0
Software version: 032.001.145.46951
Printer Driver Version: 11.21.00.1607
Installation IO: USB

Printer no longer connecting to wireless network

I updated my wifi password so I had to reconnect all my wifi enabled devices. I decided to just go back to the original password b/c I had too many devices to update then all of a sudden my wireless printer stopped working. It kept telling me the printer is not connected. I have tried uninstalling and reinstallign the software. I have tried re-establishing the network connection on teh printer screen using the WPS button on eth erouter and the pin and they both just time out. When I run the diagnostics, it says FAIL next to Network Name (SSID) Found. It is no longer picking up my wireless signal from my router. Is there a way to manually enter the network information? I have tried to manually add the printer and it only comes up if I connect using the USB but not wirelessly anymore. When I called support they said it is becasue my printer is from 2010 and its not recognized anymore??? It was working fine a week ago, all I want to do is re-connect to my wireless network. HELP please! I have spent hours upon hours tryign to fix/figure out
I am working on a Macbook with OS Mavericks 10.9 Also I am not seeing all of the utilities in my HP folder that used to be there under my applications, after I ran the uninstall they are all gone.

Hey @tlpatlen,
Welcome to the HP Support Forum.
I understand you're having an issue with getting your HP Photosmart Plus All-in-One Printer connected to your wireless network. I would like to assist you with this and may have the steps you need to restore your connection.
Thank you for including the list of steps that you have already tried. While you have essentially tried all of what I would normally recommend and all of what's recommended here, there is another alternative.
Do you happen to own or have access to a Windows PC (XP to Windows 8.1 are supported for your printer)?
Even if it would mean borrowing a laptop from a friend to use in your home or office, there are more setup options available to you in this instance with PC access.
Assuming you have PC access, you could click here to download and install the Printer Install WIzard for Windows. When you run the Printer Install Wizard on a PC, you have the option of installing the printer via usb, and then converting the setup to wireless. The difference here is that if the PC doesn't automatically detect your SSID, you can enter it manually, along with the wireless password. As you have already discovered, with your current printer and Mac combination, there is no other way to manually input your SSID and WPA/WEP.
If you were able to gain PC access and complete the basic steps I have presented, the benefit to this setup, is that your printer will be connected to your wireless network and will hopefully retain this connection when you re-connect it once again to your Mac.
I hope this helps or at the very least, gives you a sense of what options remain. Please respond to this post with details if you have any further questions or concerns.
Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Hp officejet 4500 wireless won't print from laptop. It is connected to laptop.It prints from desktop

We have a HP Officejet 4500 wireless printer which was first installed in 2011 without any problems. We also utilize a HP LaserJet P1006 printer (not wireless) with our network. I cannot print from my laptop to either printer, but hubby's desktop has no problem. Both printers stopped working for my laptop at the same time. Everything worked perfectly until a few weeks ago when I could no longer print directly from my Dell Inspiron laptop. When I check on the connectivity of both printers to my laptop, the information tells me the printers are connected to my laptop.
My husband has a Dell desktop (our main computer).
I have tried everything I know to fix this problem, including shutting down the desktop, my laptop, the router, and the printers (including disconnecting the printers from the desktop with the cords that connect to the printers). I have followed all instructions on how to restart the entire system...plug the router in, plug in the printers & turn them on, and lastly restart both computers.
I am not what one would call "computer savvy"; as a matter of fact, I am quite computer-challenged. If any of you can tell me in extremely-easy-to-understand language what to do, I would appreciate your help.

Hi,
Pleae download and run HP Print and Scan Doctor utility which should resolve most of printing issues.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-106151-2&cc=us&dlc=en&lc=en...=
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Problems with hp laser printing in leopard- wired and wireless

Printing problems in Leopard are slowly eating away at my last nerve!
Here's the background: I have a Macbook Pro 2.33GHz Core 2 Duo, 4GB ram, running 10.5.2. Ever since I upgraded to Leopard, I've been having printing problems, both wired and wireless. I have an HP Laserjet 1160, which is a wonderfully reliable printer- I've had it since 2005 and have never had a problem.
When I installed Leopard, I began getting a popup message after starting up my computer and logging in. The message has a lighthouse icon on it and reads:
"Popup Error: Failed to listen for incoming Popup jobs. You will not be able to use Popup printing for the duration of this session. Please report this incident to a system administrator."
(for the record, I only have one computer, it's not on any system, and I have the administrator account)
Here are the two problems I have:
-First, wired printing is spotty. Half of the time, when I connect the USB cable and click print, nothing prints. Usually, if I unplug the cable and plug it into the other USB port, then printing works. This is in spite of the fact that the computer recognizes that the printer is there- I can delete then re-add the printer to my printer list and still nothing.
-Second, wireless printing does not work at all. Again, the printer is recognized when plugged in to either the time capsule or the airport express, and I can add the printer, but printing doesn't work: the job is sent to the print queue, but the queue stalls on the "connecting to printer" phase.
This problem is a huge pain, and I have no idea how to solve it. Any help is appreciated.
Jon

Thanks for posting this problem Cathjock. I have had the same issue with a NEC Superscript 1400. Thinking it wast he printer, which is getting up there in age, I went out and purchased a new HP P1505 to no avail. I have been researching this for a few days now and think that all of this is related to a user permission in CUPS. I have de-installed, re-installed, re-booted etc as prescribed and got three pages hours after the fact via my Airport Express connected new printer. Generally, however, nothing comes out immediately as was the case in the past either on Airport Express or via USB cable. I am stumped and am starting to get worried.
I can't print invoices for my business and am considering firing up my old Windows machine if you can believe it !
Seriously, Apple has created a monstrous situation with all of htese printing issues and nothing is apparently being done, nothing that I can find in any of the discussion forums at this time.
My last option is to re-install 10.5 with an archive and install as I really cannot afford to start from scratch.
Now if you look at this forum, there are 242,847 views logged with 2,514 questions and 13,848 messages.
This should mean something for Apple as many people need help and are getting really really ******-off.
So pleeeeaaaaase Apple. respond and offer a fix for this problem that is plaguing a ton of people.
Chris

Problem getting Airprint (Bonjour) to communicate to HP LaserJet CP1525nw printer across a Cisco 5508 Wireless Controller

I cannot get my IPad2 to print (it cannot find the printer) using a Laserjet CP1525nw color printer across a wireless network using a Cisco 1508 Wireless Controller with 49 wireless access points. HELP!!!!
What is the secret to getting Bonjour to work on it?
I can get the IPad2 to locate the HP CP1525nw printer without a hitch using a low budget Netgear WAG102 stand alone wireless access point on the same network.

If it helps somebody, here is what you need to do.
It worked for me, but only in Multicast-Unicast mode.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0 080bb1d7c.shtml

I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

Similar Messages

Maybe you are looking for