I cannot get ipod to start, Logo for power is the only one that appears but it will not recharge either by using pC or dock. I have used two different connecting wires but no difference in response

I cannot get Ipod to start. The only logo that comes up is the power needed but in spite of connecting the ipod to PC and using two different connection leads the ipod does not respond. I also tried to power it using a i station 7 but no difference. I tried all the usual pressing of both menu and play buttons. Is it fixable?

Thanks for your tip. I tried leaving the ipod in the I -Station  7 overnight and then reconnected it to my PC> It asked if i wanted to reset to factory settings. I did this and then the Apple logo came back on .After that a very sad looking logo of an ipod came on with  www.apple.com/support/ipod underneath. I feel that either burial or cremation is my option now for this old ipod.

Similar Messages

  • It seems I cannot use Sky Go even if I use Firefox. The only one that works is IE 11.

    I was using Google Chrome, but it seems they do not support Silverlight which Sky Go use. I was told that Firefox would work. It doesn't. The only one that works is Internet Explorer 11, which is very slooow. Why can't I use Firefox to view Sky Go?

    My Sky homepage. If I want to watch cricket say, it come up with ' sky go unavailable at this present moment'. If I log on to my IE 11, sky go works Ok. I have the Silverlight add-on or plug-in whatever you call it.
    Still no joy in Firefox.

  • I upgraded from 3.6.13 to Beta 4.0 and now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing.

    I uninstalled Beta 4 and re-installed 3.6.13 now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing, I have been using Firefox for a long time but cannot resolve this problem can anyone help and give me a solution please. As I use Firefox as my web browser it is very frustrating.
    The fact it will not uninstall appears to be something completely new as nobody I know who uses Firefox has ever encountered this in the past.

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    If necessary then also see:
    * http://kb.mozillazine.org/Browser_will_not_start_up
    * http://kb.mozillazine.org/Error_loading_websites

  • I cann't get start my iPad. The only thing that appears is a part of a cable pointed to iTunes. ai have reseted many times.

    I can't get start my iPad. The only thing that appears is a part of a cable pointed to iTunes. ai have reseted many times.

    Make sure the battery is charged, then restore the iPad.
    Help here >  iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • I am getting the message that my email password and/or username is not correct. It is correct! I am the only one who cannot send or receive emails...I am the only one using a mac.

    I am getting the message that my email password and/or username is not correct. They are both correct! I am the only one who cannot send or receive emails...I am the only one using a mac. i use mac mail and it is my companies server. I took my computer and iPhone to the Apple store...4 hours later they said that couldn't figure out why it wasn't working.  Any suggestions???? I am also not able to log into the C-Panel...

    Same here! Happened yesterday to me on New iPad and iPhone 4S. On iPad I managed to correct it by removing the account and activating it again as an Exchange account...I have mail and calendar OK!
    On the iPhone nothing seems to  work!
    Facts:
    1. everything worked perfectly for years!
    2. I have the 2-step authentication deactivated  on my google account so it cannot be this one.
    3. On desktop everything works just fine, on iPad everything is OK with Exchange account added (after Google removed support for Exchange account access I CAN ONLY HAVE ONE DEVICE with Google Exchange account, so doing the same on the iPhone does not work!)
    4. Tried to remove and add the account again - no results.
    5. Tried to remove and add as Google, as Exchange, as Other account - I get calendar but no mail!!!
    6. Tried to reboot between remove/add accounts - no results.
    7. Tried to ("reset settings") reset the device - no results.
    8. Tried to add as POP account and I it worked - I get mail but I do not need POP as I am using zounds of mail with labels and need to be working on an IMAP account
    9. To make things even more complicated...I have another account which works perfectly!!!!!
    Anyone out there having a clue?

  • TS1424 I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over.  This song was in the middle of several songs, but this is the only one that is incomplete.  Can I download this song again for free, or do I have to purchase again

    I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over.  This song was in the middle of several songs, but this is the only one that is incomplete.  Can I download this song again for free, or do I have to purchase again?

    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • Am I the only one that has had every charging cable (for my iPhones and my iPads) fail? Very frustrating. I got used to quality products from Apple but seems the small stuff is being overlooked nowadays.

    Am I the only one that has had every charging cable (for all of my iPhones and all of my iPads) fail? Very frustrating. I got used to quality products from Apple but seems the small stuff is being overlooked nowadays!

    I have yet to have a cable for my iPad 3, iPad 4 or iPhone 5 fail. I have multiple cables for each device without any failures.

  • Downloaded Yosemite but it will not install on Macintosh HD as it says it is used for Time Machine Backups but it is not.  TM backup is to an external 2TB HD.  Downloaded OX x twice with the same result.

    Downloaded Yosemite but it will not install on Macintosh HD as it says it is used for Time Machine Backups but it is not.  TM backup is to an external 2TB HD.  Downloaded OX X twice with the same result.

    OS X: Cannot install on a volume used by Time Machine for backups
    For some reason you have a folder called Backups.backupdb at the root level of the hard disk on which you want to install Yosemite.
    Move it to the Trash.

  • Am I the only one that I cannot get ICH5R RAID0?

      I tried every possible BIOS settings to have a RAID0 array on Intel controller,create RAID0 array with control+I, feed the floppy with F6, and every time I get a blue screen before the beginning of XP installation.
      I wonder if I am the only one that I can't get the benefits of ICH5R RAID0 array?
       Same HD's work fine with Promise controller RAID0. :O

    Quote
    Originally posted by Pete M
    kanopus
    This is my BIOS configuration using 2 WD Raptors
    Integrated Peripherals
    ON-CHIP IDE configuration
    ON-CHIP ATA(s) Operate Mode Native Mode
    ATA Configuration S-ATA only
    P-ATA Keep Enabled YES
    P-ATA Channel Select Both
    S-ATA Ports Definition PO-1st/P1-2nd
    Configure S-ATA as RAID Yes
    Not familiar with your drives are there any jumper settings you need to make ?
    Pete
    I have 2 WD Raptors (setup for RAID 0), an ATA100 drive (Primary) and a DVD (Secondary) connected to the Intel controller.
    Is there any performance gain by using your configuration:
    ATA Configuration S-ATA only
    P-ATA Keep Enabled YES
    Versus using:
    ATA Configuration P-ATA and S-ATA
    It seems like the end result is the same.  Both the SATA and ATA100 are enabled.
    I noticed that if you want to use the RAID array as your system drive you need to set S-ATA Ports Definition to use SATA on ports 1 and 2.

  • I buy songs from itune store, but then it disappears from my ipod (gn. 4).  am i the only one?

    i buy songs from itune store, but then it disappears from my ipod (gn. 4).  am i the only one?

    You can transfer iTunes purchases from your iPod to a computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    If the purchased music is not on your computer or iPod and you are in the USA and have iTunes 10.3 you may be able redownload them via the iCloud Beta by:
    http://support.apple.com/kb/HT2519
    If not in the USA you can contact the iTunes people and they MAY allow a redownload.

  • I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.

    I erase all content and settings in ipod. Now the iPod won't turn on. The Apple logo with black background is the only thing that appears.

    put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414

  • Why is 1080i the only one that works for my slideshow.

    Well... I'm getting to my breaking point.
    First my system.. Mac Pro 2.66 2x300gb raid 0. x1900 ACD 30
    5gb Ram
    I have read many many posts.. but I still need your help.
    I have found that the only thing that gives me a marketable slideshow in terms of quality images is to make a slideshow in imovie under 1080i.
    The problem with this is that it really really slows my computer down, and I don't want to do this with a slide show of about 150 images per client, and then have wait more for transistions.
    Shouldn't I start a new slideshow in "DV" setting for a 4x3?
    I have tried reducing res from 10.2 mp to a 1024x??? settting for images (depending on orientation). All I seem to lose here is a bit of sharpening as I reduce the image resolution, which makes sense if I understand correctly.
    So... Where to go from here.
    I read the posts.. and have determined that I can use Photo to move (which I have) to make clips and import them into Imovie. Again, a slow process as each clip has to be done seperatly. Is there another way with PTM, because it does render the best Ken burns effect I have seen. Again 150 images is too long to wait to make a slide show of a wedding, not cost effective for me.
    Hope someone can help.

    Anyone??
    When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
    Just wondering why choosing those options are the only ones that seem to work
    I really need to get it into 4x3 format too.

  • HD slideshow is the only one that works for me.. WHY??

    I have a new mac pro with lots of hd and ram 5GB.. so I don't think its my system.
    What I need to know is that I can make an acceptable slideshow if
    1) I lower the resolution of my photos from 3884x2600 to about 1024x1024
    2) I create a imovie 720hd or 1080i HD.
    ANY other format creates a lousy final picture quality when viewed on the TV. I get a shimmering, but not so noticible jaggies as some have posted. If I keep the photo still and not use KB.. the still images are ok, but not fantastic. The KB kills them. This seems opposite of what I have read of the bug in imovie6.
    Can anyone explain why if I use the HD formats for Imovie the photos turn out ok?
    I would like to keep them in a 4x3 format but can't if I use the HD formats. Is there a way to make it 4x3 after?
    Anyway.. I have done a lot of testing and this is the best I can get so far.

    Anyone??
    When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
    Just wondering why choosing those options are the only ones that seem to work
    I really need to get it into 4x3 format too.

  • How do you transfer songs from my iPod Classic to my new computer? The only songs that transfer are those that I purchased on iTunes. Is there a 3rd party website or something?

    I am trying to transfer 3000 songs from my iPod Classic to my new computer. The only songs that transfer are those that I have purchased on iTunes (242 songs). All of the music from my CD collection that I have on my iPod Classic will not transfer. What (if any) is the best 3rd party website that will assist?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I keep getting an error message telling me to adjust the network settings on computer as it will not connect to iTunes Store.  I have tried and no luck.

    I keep getting an error message telling me to adjust the network settings on computer as it will not connect to iTunes Store.  I have tried and no luck.

    What version of iTunes is on the Mac?
    What OSX version is on the Mac?
    The 5G iPod requires iTunes 10.7 or later and that requires OSX 10.6.8 or later.

Maybe you are looking for