HD slideshow is the only one that works for me.. WHY??

I have a new mac pro with lots of hd and ram 5GB.. so I don't think its my system.
What I need to know is that I can make an acceptable slideshow if
1) I lower the resolution of my photos from 3884x2600 to about 1024x1024
2) I create a imovie 720hd or 1080i HD.
ANY other format creates a lousy final picture quality when viewed on the TV. I get a shimmering, but not so noticible jaggies as some have posted. If I keep the photo still and not use KB.. the still images are ok, but not fantastic. The KB kills them. This seems opposite of what I have read of the bug in imovie6.
Can anyone explain why if I use the HD formats for Imovie the photos turn out ok?
I would like to keep them in a 4x3 format but can't if I use the HD formats. Is there a way to make it 4x3 after?
Anyway.. I have done a lot of testing and this is the best I can get so far.

Anyone??
When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
Just wondering why choosing those options are the only ones that seem to work
I really need to get it into 4x3 format too.

Similar Messages

Why is 1080i the only one that works for my slideshow.

Well... I'm getting to my breaking point.
First my system.. Mac Pro 2.66 2x300gb raid 0. x1900 ACD 30
5gb Ram
I have read many many posts.. but I still need your help.
I have found that the only thing that gives me a marketable slideshow in terms of quality images is to make a slideshow in imovie under 1080i.
The problem with this is that it really really slows my computer down, and I don't want to do this with a slide show of about 150 images per client, and then have wait more for transistions.
Shouldn't I start a new slideshow in "DV" setting for a 4x3?
I have tried reducing res from 10.2 mp to a 1024x??? settting for images (depending on orientation). All I seem to lose here is a bit of sharpening as I reduce the image resolution, which makes sense if I understand correctly.
So... Where to go from here.
I read the posts.. and have determined that I can use Photo to move (which I have) to make clips and import them into Imovie. Again, a slow process as each clip has to be done seperatly. Is there another way with PTM, because it does render the best Ken burns effect I have seen. Again 150 images is too long to wait to make a slide show of a wedding, not cost effective for me.
Hope someone can help.

Anyone??
When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
Just wondering why choosing those options are the only ones that seem to work
I really need to get it into 4x3 format too.

Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows. The only music that works is the Sample and Theme music that comes with iPhoto. Any idea of what to do about this problem?

Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows. The only music that works is the Sample and Theme music that comes with iPhoto. Any idea of what to do about this problem?

In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out.

It seems I cannot use Sky Go even if I use Firefox. The only one that works is IE 11.

I was using Google Chrome, but it seems they do not support Silverlight which Sky Go use. I was told that Firefox would work. It doesn't. The only one that works is Internet Explorer 11, which is very slooow. Why can't I use Firefox to view Sky Go?

My Sky homepage. If I want to watch cricket say, it come up with ' sky go unavailable at this present moment'. If I log on to my IE 11, sky go works Ok. I have the Silverlight add-on or plug-in whatever you call it.
Still no joy in Firefox.

HT1923 This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users. My iPhone 4 will now sync with iTunes both in its USB-connected mini dock and over Wi-Fi. It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process.

I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

Windows Explorer was crashing/restarting every few seconds and after trying several different methods of fixes, the only one that worked was removing Firefox, is there something I've missed that I can get Firefox back?

I'm running a Toshiba Satellite laptop that was originally running Windows Vista 32-bit, but was upgraded by me to Windows 7 32-bit. On Windows Vista, all I would run was Firefox. I loved it!!! On Windows 7, I've noticed that Firefox kept hanging whenever I would try to download a file...from anywhere. I got so frustrated I went to try several different browsers. They all worked extremely quickly, whereas Firefox was working so slow, I could click on a link to a page, go get some lunch, come back and it still be trying to load the page. This was drastically unusual for Firefox. I used the other browsers and everything was fine for a week and then Windows Explorer started going down every few seconds. I went to the windows 7 forums and started looking. There were several suggestions on how to fix the problem, none of which worked for my compy. I tried restarting the compy in safe mode. That didn't help. I turned off every startup program except for the essentials and that DID work in keeping Windows Explorer from restarting. I then dove into the tedious task of trying to discern which 3rd party program was the offender. I removed everything from my compy that had been downloaded in the last ten days (well before the windows explorer issue, but not before the firefox issue). That didn't work either. I tried replacing an explorer file, which didn't work either. There were several other things I tried, as well, but nothing worked. Then, I saw a post that Firefox had caused the problem for one person. I went in and did as was suggested and completely removed Firefox and all associated files. Unfortunately, this worked. I haven't had any more trouble with windows explorer restarting. My big problem is, however, I can't run Firefox!!! And I LOVE Firefox!!! It's spoiled me! I hate Internet explorer, which is what I'm forced to run now. I've tried Safari and Google Chrome and don't like either one of those, either. I want my Firefox back! But if it's not working 100% it's less frustrating to be forced to live with the Internet Explorer. I'm going insane, here! Does anyone have any suggestions? I tried clearing out browser history, changing download files and a couple of other things and nothing worked with the Firefox to get it going better before I started having the Windows Explorer difficulty and had to completely erase the Firefox program. If I've missed any info, please don't hesitate to ask!! I'm happy to supply whatever I know about the issue!!

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

Why 1.3bios the only one that works???

1st Question: When i install a new bios my system fails to completely boot to
XP-PRO. It flashes me a blue screen of then and restarts.... whats up with that?
Must try to reinstall XP op is this a genral issue that can be fixed?
2nd Question: Do the new bios versions actually increase speed & stability or should i stick to trusty 1.3?
P4 2.4 HT
NEO2S
256DDR400 X 2
220 FSB(To unstable over 220)??????
120 WD 8MB
MSI FX5600 VTDR128
300WATT PSU
DVD/CDRW combo crap

umm.. what brand ram are u using.
and why are u at 220FSB.. when u do that doesn't the frequency of your ram go up too? maybe they can't handle it... unless of course u set them as lower frequency ram such as 333 or 266 or something.
try booting up with PC2100 ram and then go into BIOS to raise voltage to 2.65 and then shut off, replace with PC3200 ram and then reboot.
I know that my Kingston HyperX PC3200's won't boot unless they have at least 2.65V

Firefox the only browser that works?

I'm having a really strange problem...
Since maybe a couple weeks ago Firefox is the only browser that works for me. Other browsers can't seem to connect to ANY website. I've tried Safari and Opera... they don't work.
I have:
tried several different wifi signals
reinstalled Safari, Opera, and Firefox
reinstalled OS X (archive and install)
repaired disk permissions
No matter what I do, Firefox is the only thing that works

That's not a particularly good thing. Browsers should NEVER ignore system wide proxy settings. They need to change that.
Firefox has 3 Proxy modes:
a) No proxy
b) Auto-detect proxy settings for this network
c) Manual proxy configuration
The default is "No proxy"
If you select "Auto-detect proxy settings for this network", Firefox will use the Network proxy setting.

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

I have the ipad 1, ios 5.1 is its max, and garage band requires ios 7.0, how do i buy garage band version 1.3, its the only one that will work, apple is so hard to get a hold of on these kind of things.

I have the ipad 1, Ios 5.1 is its max, and garage band requires ios 7.0, how do i buy garage band version 1.3, its the only one that will work, apple is so hard to get a hold of on these kind of things.

Unfortunately the answer is still no.

Want my JFrame to be the *only* one that can end the program when closed

Hi all,
I have an application that is essentially a launcher for other applications -- it's a holder to allow us to demo our work and other Java examples (not necessarily our work). The launcher will either run methods to launch an application or will find a class's main method and invoke that.
In all cases, the other applications open up their own JFrames, separate from my launcher (this is a good thing). The problem is that, in general, the other JFrames are set to EXIT_ON_CLOSE. This means that if the user closes the second window, everything will close.
Is there anyway to prevent this from happening? I'd like either a way to say that my JFrame is the only one that can exit the program when closed, or to say globally that JFrames can't exit on close, and then re-work my initial frame so that it is still able to exit.
Note that changing all the other applications so that they do not include the EXIT_ON_CLOSE line is not an option (several of the applications we have the right to use, but not the right to modify, for instance).
Any thoughts?
Thanks,
Sam

Darryl.Burke wrote:
I have a similar launcher application and this is how I tackled the issue....
Window[] windows = Window.getWindows();
This seems like a great work-around. The only problem is that Window.getWindows() is only 6.0, and unfortunately I can only assume 5.0. I can't see another method in the Window class that will return unowned windows -- is there another method that you know of?
Edit: I found I can use Frame.getFrames() instead, but unfortunately I've discovered this doesn't solve my problem. One of the applications is listening to window closing and is calling System.exit(0) itself, and is not using EXIT_ON_CLOSE as I previously thought. So I think that launching a new JVM may be the only option.... Any advice on how to do this? I'm a little stuck with the ProcessBuilder stuff above.
>
edit In future (not this time), Swing related questions should be posted in the [Swing forum|http://forums.sun.com/forum.jspa?forumID=57]
I guess I was thinking this as a process-oriented question (I had already been thinking of the "different JVM" tactic), but the other option was to think of it as a pure-swing problem, like your solution above. Guess I should have just cross-posted -- everyone loves that! ;-)
Edited by: Asbestos on Dec 18, 2008 12:32 PM

Are Apple products the only ones that have the option to have a hot spot built into i?

my husband needs to use a tablet for work. We don't have an Internet provider for it. I thought about using a personal hot spot for it. I have 2 Apple products he doesn't have any. Can you use a personal hotspot for them. I am not familiar with his products at all. Is Apple the only one that offers a hotspot on their products?

No. Click here and see the third paragraph.
(120029)

Am I the only one that I cannot get ICH5R RAID0?

I tried every possible BIOS settings to have a RAID0 array on Intel controller,create RAID0 array with control+I, feed the floppy with F6, and every time I get a blue screen before the beginning of XP installation.
I wonder if I am the only one that I can't get the benefits of ICH5R RAID0 array?
Same HD's work fine with Promise controller RAID0. :O

Quote
Originally posted by Pete M
kanopus
This is my BIOS configuration using 2 WD Raptors
Integrated Peripherals
ON-CHIP IDE configuration
ON-CHIP ATA(s) Operate Mode Native Mode
ATA Configuration S-ATA only
P-ATA Keep Enabled YES
P-ATA Channel Select Both
S-ATA Ports Definition PO-1st/P1-2nd
Configure S-ATA as RAID Yes
Not familiar with your drives are there any jumper settings you need to make ?
Pete
I have 2 WD Raptors (setup for RAID 0), an ATA100 drive (Primary) and a DVD (Secondary) connected to the Intel controller.
Is there any performance gain by using your configuration:
ATA Configuration S-ATA only
P-ATA Keep Enabled YES
Versus using:
ATA Configuration P-ATA and S-ATA
It seems like the end result is the same. Both the SATA and ATA100 are enabled.
I noticed that if you want to use the RAID array as your system drive you need to set S-ATA Ports Definition to use SATA on ports 1 and 2.

Firefox frequently freezes. I can't click on anything (tabs, menu buttons, bookmarks, etc.) The only button that works is the upper right close button which when clicked will ask me if I want to "save & quit." Then I have to restart. Help fixing this?

Frequently when I use Firefox it will all of a sudden freeze. It no longer will accept any user input from the keyboard or mouse. I cannot click on any of the open tabbed pages I have or on my bookmarks or any of the menu buttons. Nothing works. When it happens if it is loading a page it will just freeze in the middle of loading it. I've tried to see if the freezes are caused when it loads certain types of content (java, flash, etc...) but there seems to be no rhyme or reason as to when it happens or with what types of pages. I cannot find a pattern. The ONLY button that works is the close button in the upper right hand corner (X). I can click on that and then Firefox will prompt me with it's regular message asking me if I want to save and quit, quit, or cancel. I'll hit save and quit and then reopen Firefox. It opens my tabs and if I was in the middle of a post it generally will still remember the text I've typed (except Facebook!).
It's beginning to drive me nuts and I'm really hoping to find a fix to this.

You will also notice that your shift key will be emulated. Meaning that keys you will try to press will press but they will act like you are pressing the shift key when you are doing them.
Try this, minimize the firefox window by pressing the tab on your taskbar. After doing that maximize it again. You will magically be able to click any link on your page. When you navigate to a new page however, the entire situation will start all over. My only remedy is rebooting and hoping it doesn't happen again soon.

TS1424 I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over. This song was in the middle of several songs, but this is the only one that is incomplete. Can I download this song again for free, or do I have to purchase again

I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over. This song was in the middle of several songs, but this is the only one that is incomplete. Can I download this song again for free, or do I have to purchase again?

If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

HD slideshow is the only one that works for me.. WHY??

Similar Messages

Maybe you are looking for