I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works.

I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works. I am trying to get the little microphone to show up for voice messaging.

I have since fiund out that the talk to text feature is only available on devices that support Siri, iPad3, iPhone4 and later. Hope this helps someone else.

Similar Messages

  • I can not get my ipod 4 gen to log into Free Wifi hotspots. It shows that it is connected but I have to internet activity. I was at several hotspot locations last night and could not get on any, but other people were. HELP.

    I can not get my Ipod 4 Gen to log into free WIFI hot spots. It shows that I am connected but I have no internet activity. I was in several hot spots last night and could not log in, other people were, but I could not. HELP!

    - Did the other users who successfully connected have iDevices?
    - Frequently you have to open Safari/a browser and agree to the terms and conditions of the wifi spot before yo can get to the internet.  Some wifi spots use Flash or Java to log on which the iPod (and other iDevices) do not support)
    - Have you tried resetting network settings: Settings:General>Reset>Reset Network Settings
    - Does you Ipod successfully connect at home?.

  • HT201302 When I travel with my SLR I like to transfer all photos to the iPad so that they are more easily edited and viewed by others, using the camera kit.  Occasionally I would like to export photos - I have not found a way to do this.  Can you help?

    I occasionally have the need to export photos from the iPad to an SD card (photos that were imported using the camera kit). This is useful for e.g. to print photos while travelling.  So far I have not found this functionality anywhere, including in any apps available on iTunes.  Can anyone help?

    The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
    This may be of interest.
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

  • TS1315 when trying to download photos  from my digital cameras I keep getting the message that pics can't be downloaded because of an unrecognizable format. It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic.

    when trying to download photos  from my digital cameras I keep getting the message that pics can't be downloaded because of an "unrecognizable format". It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic. I have had these cameras for a few years and have never had a problem downloading.

    I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
    However today I tried to download six photos.
    None would download including several others for a total of 21 that would not download.
    Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
    However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
    (1) Put a fresh battery in the camera - same results
    (1.5) Used a different port in the new hub - same results
    (2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
    (3) Tried again using the cable - still same error
    (4) Changed cables - my husband has the same camera - still same error
    (4) Put the card in his camera with his cable - still same error
    (5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
    (6) Moved the offending one image to the Trash while the card was in the card reader
    (7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
    Conclusion:
    Not the camera
    Not the cable
    Not the hub
    Must remove bad photo from the card
    However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
    Any idea why this is happening now?
    Thank you

  • I just upgrade from the 4 to 5s.  Are my apps supposed to transfer over and perhaps it just takes time to load like my email and pitures. I tried to install apps and it showed that they are already downloaded.  What do I do to get them to show up?

    I just upgrade from the 4 to 5s.  Are my apps supposed to transfer over and perhaps it just takes time to load like my email and pitures are? I tried to install apps and it showed that they are already installed.  What do I do to get them to show up?

    Hi, Twilavegas3. 
    Thank you for visiting Apple Support Communities.
    If your restored from a backup and the apps that are missing on the device show "Open" in the App Store, then they are located on other pages on your iPhone or are in folders.  Also, with the iOS 7 update most developers have changed icon badging.  This can cause some applications to be difficult to find.
    iPhone User Guide
    Cheers,
    Jason H.

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • Why don't some of the photos I took with my iPhone 4S appear on my iPad 3? Both are connected to WiFi and iCloud is activated on both devices.

    Why don't some of the photos I took with my iPhone 4S appear on my iPad 3? Both are connected to WiFi and iCloud is activated on both devices.

    Welcome to the Apple Community.
    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

    How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

    skjeggi
    What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
    True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
    looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
    Adobe document....
    http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
    When your schedule permits, please let us know if that worked for you.
    Thank you.
    ATR

  • I am having trouble syncing photos with lightroom mobile. Lightroom (on computer) tells me that it's syncing but nothing appears on my I pad. Any comments?

    I am having trouble syncing photos with lightroom mobile. Lightroom (on computer) tells me that it's syncing but nothing appears on my I pad. Any comments?

    however when I try to sync my older ipod with it and upload some new music to it, Itunes keeps telling me that all the previous songs will be erased
    Yes, that's correct. If you don't have the songs that are currently on your iPod also in your new iTunes installation, they will be erased from the iPod if you sync it. Best to start afresh by first transferring all the music on your iPod back to your new computer/iTunes library.
    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod or iPhone to a computer.
    For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Other free programs are Pod Player, SharePod and Floola.
    If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
    iPodRip also has the feature enabling you to reconstruct playlists.
    There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
    Once all the music is safely back in your new iTunes library, you can sync your iPod as normal.

  • Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

    Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
    Do anybody out there has an ideal of what to do to solve this issue.
    Thanks
    Pierre317

    Hi Pierre,
    more tips can be found here ...

  • HT201487 i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

    i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

    That's not very intuitive
    Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password.

  • I just purchased an iPad trying to get audio book downloaded. I downloaded 2 different apps and 2 books that said they were audio but nothing works. So frustrations.

    I just purchased an iPad trying to get audio book downloaded. I downloaded 2 different apps and 2 books that said they were audio but nothing works. So frustrations. Can anyone help me? Leaving on a trip Friday would really like to have it  :)

    You can purchase Audio books in the iTunes Store App and they will be downloaded for playing in the Music App.
    What two Apps are you talking about?

  • After my recent update, I can't get my music to copy to my itunes library. I've tried both adding file and folder, but nothing works. Has anyone else had this problem, and how did you resolve it?

    I've tried uninsstalling an re-installing itues sevral times, and still can't get it to work. I don't know what else to try.
    Thank you in advance

    iTunes will silently ignore any request to add files that it can't get access to. It is hard to know for certain but it seems that some requests go via the current user account and some via the system account. Might be worth checking that both your account and system have full access to all the files you are trying to connect, and that they are not hidden.
    Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
    If it won't let you change the permissions use the Owner tab to take ownneship from an account with administror privileges.
    tt2

  • Cannot get IPod to properly communicate with Windows or ITunes

    I just bought a used 20GB G4 Ipod off of EBay. I have never owned an IPod but have been using ITunes 6.04 for awhile, using it as an organizer for my ripped MP3's and a few songs purchased on tunes. I first tried to install the IPod software from the CD that came with the IPod. The IPod software installed fine (or so it appeared) but the installation program did crap out after telling me that I already had a newer version of ITunes installed.
    I tried to get my IPod to be recognized by Windows/ITunes that first night but had no luck. I was not sure if I was being too impatient or not, so finally let things just run and went to bed. When I got up the next morning my IPod battery was completely dead. I then read some stuff here and got a little better idea of what I was doing.
    The IPod and it will boot up by itself, but has no songs on it. I have not tried to run any diagnostics on it - are there some? I have determined that the IPod menu tells me that it is Windows formatted.
    Since then I have downloaded the latest version of the ITunes software. Here is what happens for me now. I uninstall the ITunes and IPod software and then reinstall them. I don't think the order of installation matters to my outcome, as I have done this both ways. After a fresh reboot I connect the IPod to the USB port on my compute. Windows recognizes that a USB device has been attached, and recognizes it as an Apple IPod USB Storage Device (I didn't write down the exact wording, but IPod is definitely part of it). After some disk chugging I get a message from the Windows USB handling software that I may need to reboot for the device to work. I then get a message from Apple software saying the same thing. I reboot my computer and it hangs on reboot if I leave the IPod connected. I disconnect the IPod and let Windows reboot. When Windows is back up I connect the IPod. Windows recognizes the USB device being plugged in but this time it thinks it is a generic USB storage device, no mention of IPod. If I'm patient after awhile I will get a message from ITunes telling me my IPod needs to be reformated. I click yes (or OK or whatever) and the IPod Update software starts. It just sits there. If I leave it overnight it will drain my IPod battery. But I never get the upgrade or restore options. And I have on occaision gotten a "can't mount IPod" message.
    So am I doing wrong? Is it possible my IPod was damaged in shipping? How can I tell? Is this just Steve Jobs getting even with Bill Gates (at my expense)? Is the IPod the root of all evil or the greatest thing since sliced bread?
    P.S. I do not know if it matters or not, but I have a Zen Micro and all of it's associated software installed on my machine as well.

    I did get mine to communicate with Windows finally. I uninstalled both the Ipod software and ITunes. I then setup the Ipod with the original CD it came with. After that I upgraded first to the newest IPod softare and then to ITunes 6. I'm getting an error -69 while transferring files now, but the communication between the Ipod and Windows is there now.

  • HT204053 I recently changed my apple id to a new email.  I cannot get my devices back online with my new apple id in the icloud

    I recently changed my apple id to a new email at the same time getting a new Iphone 5.  I cannot get all my devices back online with icloud since.  It is still showing my old email even though I changed it and logged in under the new one.  My icloud information is grayed out for the apple id.

    You need to sign out completely in System Preferences (or Settings)>iCloud and then sign back in again with the new ID. Your iCloud data will disappear when you sign out but will reappear when you sign back in (may take a bit of time).

Maybe you are looking for

  • Logical time in deleted time events - RPUAUD00

    Dear All, We are using standard report RPUAUD00 to read deleted time events (Infotype 2011) from system. In certain cases, deletion entries are displayed without any entry for field LTIME (Logical Time). Can any one throw some light, as of why and ho

  • Difference between 32bit and 64bit Weblogic 10.3.3 Installer

    Hi, I would like to understand what is the difference in terms of files/libraries in 32bit & 64bit installer of WLS10.3.3. We have installed 32bit WLS10.3.3 and would like to upgrade to 64 bit version of WLS ( OS is 64bit Linux). If we just update th

  • DVD drive is not working on Satellite A200-1S5

    After installing vista the dvd unit is not reading any disk until reboot. To be more specific, from the first moment I purchased the notebook I try to install ms works from disk but the unit was not reading. I observed that if the disk was in the uni

  • 32bit Printer Drivers on 2012 64bit Server

    Quick synopsis: 64 bit Windows 2012 server setup completed.  Most of our users are 32 bit Windows XP. I've found many of the forum posts helpful, and I've started making sure that the drivers being used are Type 3 (by installing the 32 bit driver and

  • Convert Action script Flex project to MX Component

    Hi gurus, I am looking into one of the examples on "Inspectable" in Flex project. As per my knowledge to convert we need to define a .MI file. Can anyone help me in converting this project into a MX component. Thanks and Regards Srikanth Anthargam