I cannot print from a website using the "print" button nor going to "file" "print preview" (nothing there to preview) then "'print" - nothing prints.

I cannot print from any wetsite as there is no print button. I have tried using the printer icon, also file, print preview then print. Nothing to preview nothing printed. How do I print from a website?????

If this is similar to problems I sometimes have printing -- 1) Only happens on some, not all, websites 2) Printer preview window comes up OK, just shows a blank page -- I can suggest a work around, if not a solution: try turning your page into a PDF. Either install an extension which gives a "Save as...PDF" menu option, or a PDF printer driver (I use bullzip). The problem seems to be with the manner the websites use frames and/or javascript. This work around also handles websites that can't get along with your printer settings and chop off edges.

Similar Messages

  • Firefox Sync: I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

    I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

    reading through that, it doesn't look like you were given up on Candice. you never replied to StarDeb's last set of questions in that thread. she was probably waiting to hear back from you.
    why didn't you reply?

  • My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [/forum/1/688252]
    Thanks - c</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
    == This happened
    ==
    Every time Firefox opened
    == two or three months ago
    ==
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
    == Plugins installed
    ==
    *-npdnu
    *npdnupdater2
    *Coupons, Inc. Coupon Printer DLL
    *Coupons, Inc. Coupon Printer Plugin
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *6.0.12.448
    *RealPlayer(tm) LiveConnect-Enabled Plug-In
    *RealJukebox Netscape Plugin
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
    *Shockwave Flash 10.0 r45
    *Yahoo Application State Plugin version 1.0.0.7
    *3.0.50106.0
    *My Web Search Plugin Stub for 32-bit Windows
    *Google Updater pluginhttp://pack.google.com/
    *Google Update
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    *Npdsplay dll

    * If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
    * Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
    * If items are missing then see if you can find them in the View > Toolbars > Customize window.
    * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
    * If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
    See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
    See http://kb.mozillazine.org/Toolbar_customization

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • I can't print multiple pages from a website using the site's print button or 'file - print' and if I try to save as a PDF, it still only saves the first page and then cuts off.

    I'm using Mac OS X 10.5.8 and Firefox version 3.6.8. When I'm on a website and try to print the info on the site, whether I use the site's own 'print' option, or I go to the Firefox toolbar and try to use 'File->Print', only 1 page prints out - it just cuts off mid-page. If I try to save as a PDF instead, the same thing happens in exactly the same spot - it saves as a 1-page PDF and cuts off in the middle of the page. I've already tried all of the suggestions here https://support.mozilla.com/en-US/kb/Printing+a+web+page?s=printing&as=s and the suggestions here http://kb.mozillazine.org/Problems_printing_web_pages and nothing has worked.
    I appreciate any help!!

    I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.

  • I am trying to use the new plug-in for import from aperture. But the "import" button always disappears ... any help out there?

    Hi there
    I have up-dated LR to the latest version and like to use the plug-in for the import from the Aperture library. I follow the steps suggested by an article, have saved all picture into separate folders (folder = project name) and still, after the analysis of the library, the "import" button disappears and I am stuck and can't import.
    Any ideas what can be done/must be done to get this working?
    Regards
    Diethard

    I am having the same issue, i've selected my Aperture library, and the "import" button does not activate.  Any idea how to fix? 

  • I used the home button for going home and multitasking like for a month because i dont have an idea about the circle thing that you just touch when you go home, so is it bad? Like is my home button is lready shrinking? How do i know?or any comments?

    is it okay to use other adapter but apple charger to charge my ipod touch 5th gen. If not, why?
    And why you didnt include adapter for ipod touch 5th gen? What if the user or consumer dontt have a laptop?

    Would you rather upgrade to windows 8, BlackBerry or Android phones? Do you honestly think those don't have problems?
    You waited a lot and chose to buy an early production model. Mistakes happen all the time a factory retools and workers relearn new skills necessary to keep US happy.
    Exercise your rights.... Send it back for a new one. 
    In any case, I feel your frustration. Btw, I love Apple but use a Blackberry

  • When I try to forward a PDF file by using the email button on the toolbar, it won't send.

    I cannot always forward a PDF using the email button on the toolbar.  For example, I get a report forwarded to me as a link.  When I open the link, the document opens as a PDF.  I use the email button on the toolbar to forward the document as an attachment.  Outlook pops up as a new message with the attachment.  I finish writing my email and hit the "send" button and I get an error saying the doucment couldn't be sent.  If I close the email and save it as a draft, I can open the draft copy and it will send.  Is there someway to fix this so I can eliminate these extra steps?  This has happened on a computer with Adobe Reader as well as a computer with Adobe Acrobate 9 Standard. 

    teresah7680 wrote:
    the doucment couldn't be sent.
    Is that the exact message that Outlooks gives you?
    Anyway, why don't you just forward the original link to the document, instead of the PDF itself?

  • Clicking noise when using the 'mouse' button

    I'm not sure what the button is called, but I'm sure ya know what I mean. I've had my macbook since August and this had just started happening. When I used the clicking button, it's harder to press, almost like there's something under it, and it makes a noise like it's getting stuck but then going down all the way. Anyone else have this issue or know what's causing it? Should I just get a mighty mouse?

    Follow the instructions in this article released by Apple.
    http://support.apple.com/kb/HT6545?viewlocale=en_US
    Best.

  • Why cant i print from my ipad using airport express but i can print from my mac using the express

    why cant i print from my ipad using airport express but i can print from my mac using the express

    Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

  • I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty

    I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty

    You can find authorized Apple dealers in Abu Dhabi by clicking here. They can answer purchase questions and most can handle warranty service.
    By the way, this forum is for questions about the iPod touch, not the iPad. If you have questions specific to the iPad, it would be best to ask them in the iPad forum.
    Regards.

  • HT4623 I cannot update my iOS even when I use the update button from iTunes.

    When I use the update button from iTunes it gives me this message " the iPad soft where update server could not be contacted (that's in boldface). Make sure your network settings are correct and your network connections is active, or try again later." my network settings are active and correct (I think it is correct) and I tried again later many times. Please help me I want to go to iOS 6.1.

    This happens a lot! Go to settings> general> reset> reset network settings. When this is completed, anything stopping the update will be removed. Try it again after that.

  • TS1367 I am asking this question about my 27 inch iMac Desktop Computer. I normally use my Laptop and very seldom use the desktop but was going to download the new software earlier today. I could not wake it from sleep.

    The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in  the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
    Jean

    The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in  the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
    Jean

  • Cannot recover from lost of all the controlfiles without resetlogs?

    Cannot recover from lost of all the controlfiles without resetlogs?
    I have an Oracle10g (10.2.0.1) database(on RHEL5.0 system) DB10G with a recovery catalog database RCATALLOG. The RCATALOG database is synchronized with theDB10G database.
    Then I lost all the current controlfiles and I make the following steps:
    SQL> shutdown abort;
    ORACLE instance shut down.
    SQL> startup nomount;
    ORACLE instance started.
    [oracle@hostp db10g]$ rman target / catalog rman/oracle@rcatalog
    RMAN> restore controlfile;
    RMAN> alter database mount;
    RMAN> r*ecover database;*
    RMAN> alter database open;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of alter db command at 09/17/2008 20:04:07
    ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
    RMAN> alter database open noresetlogs;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: "resetlogs, ;"
    RMAN-01008: the bad identifier was: noresetlogs
    RMAN-01007: at line 1 column 21 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 32 file: standard input.
    Because I did not restore the the controlfiles from the backups, I do not need to open the database with open resetlogs.
    Why I cannot open the database without resetlogs? Is any step wrong?
    Thank you

    Hi,
    You restored the controlfile from backup but not the full DB. The Database files header are not sinchronized with your controlfile.
    Follow the following steps:
    1) Mount your Database and create a backup of the controlfile using:
    SQL>ALTER DATABASE BACKUP CONTROLFILE TO TRACE;2) Modify the trace file and recreate the controlfile.
    3) At this stage your database is mounted. You need to recover it.
    SQL> recover database;
    Media recovery complete.4)Open the database after recovery completes.
    SQL> alter database open;
    Database altered.Done, any problem you can use this link for reference:
    - http://www.databasejournal.com/features/oracle/article.php/3738736
    Cheers,
    Francisco Munoz Alvarez
    http://www.oraclenz.com

  • I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. I do not want t

    I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?

    Try to install Adobe application Manager from below link and check
    Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You

Maybe you are looking for