I cannot restart my ipad: how to solve it?
I cannot restart my ipad: how to solve it?
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to book up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
I cannot restart my iPad 2 with these messages (error # : 1603)
Hello all. I have a 3G iPad 2. When I restart the IPAD appears
[FTL:MSG] Apple NAND Driver (AND) RW
[FTL:MSG] FIL_Init [OK]
[FTL:MSG] BUF_Init [OK]
And the I tunes cannot restore my Pad
Someone can give me a hand?Check the "Error 1603" paragraph here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
I have problem with my ipad, when started to open ipad, i have to type code to open the ipad, but many times incorrect type. My ipad can't connect to Itune due to this locked. My ipad mini
Thank you.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi,
first of all, though it sounds similar this question is completely different to and independent from the "former question" (MaxDB: Table with many LONG fields does not allow an INSERT: ...?) I posted a few hours ago. The "former question" refers to another MaxDB installation and computer where the problem mentioned below does not occur.
We have a MaxDB instance where some features do not work,
- Tables cannot be removed
- Fields of a table cannot be removed
- MaxDB odbc driver 7.5.00.26 does not work
besides of this the rest seems to be ok.
History: Originally MaxDB was installed as version 7.4. Then we migrated it to 7.5.00.26. Since (for now) some of the clients work with Win98 we use the MaxDB odbc driver 7.3 to make it possible. Unfortunately, MaxDB odbc driver 7.5.00.26 does not work on WinXP clients.
Perhaps the migration from 7.4 to 7.5.00.26 has not been done completely. Can you please point me to a info about this migration. Cannot find it any more. Perhaps something else is wrong. What can I do to solve the above mentioned "restrictions"?
Hints are very much appreciated. -- Thanks in advance.
Michael
All db params given by
dbmcli -d myDB -u dbm,dbm param_directgetall > maxdb_params.txt
are
OK
KERNELVERSION KERNEL 7.5.0 BUILD 026-121-094-430
INSTANCE_TYPE OLTP
MCOD NO
_SERVERDB_FOR_SAP YES
_UNICODE NO
DEFAULT_CODE ASCII
DATE_TIME_FORMAT INTERNAL
CONTROLUSERID DBM
CONTROLPASSWORD
MAXLOGVOLUMES 2
MAXDATAVOLUMES 11
LOG_VOLUME_NAME_001 LOG_001
LOG_VOLUME_TYPE_001 F
LOG_VOLUME_SIZE_001 20000
DATA_VOLUME_NAME_0002 DAT_0002
DATA_VOLUME_NAME_0001 DAT_0001
DATA_VOLUME_TYPE_0002 F
DATA_VOLUME_TYPE_0001 F
DATA_VOLUME_SIZE_0002 20000
DATA_VOLUME_SIZE_0001 20000
DATA_VOLUME_MODE_0002 NORMAL
DATA_VOLUME_MODE_0001 NORMAL
DATA_VOLUME_GROUPS 1
LOG_BACKUP_TO_PIPE NO
MAXBACKUPDEVS 2
BACKUP_BLOCK_CNT 8
LOG_MIRRORED NO
MAXVOLUMES 14
_MULT_IO_BLOCK_CNT 8
_DELAY_LOGWRITER 0
LOG_IO_QUEUE 50
_RESTART_TIME 600
MAXCPU 1
MAXUSERTASKS 50
_TRANS_RGNS 8
_TAB_RGNS 8
_OMS_REGIONS 0
_OMS_RGNS 25
OMS_HEAP_LIMIT 0
OMS_HEAP_COUNT 1
OMS_HEAP_BLOCKSIZE 10000
OMS_HEAP_THRESHOLD 100
OMS_VERS_THRESHOLD 2097152
HEAP_CHECK_LEVEL 0
_ROW_RGNS 8
_MIN_SERVER_DESC 16
MAXSERVERTASKS 21
_MAXTRANS 292
MAXLOCKS 2920
_LOCK_SUPPLY_BLOCK 100
DEADLOCK_DETECTION 4
SESSION_TIMEOUT 900
OMS_STREAM_TIMEOUT 30
REQUEST_TIMEOUT 5000
_IOPROCS_PER_DEV 2
_IOPROCS_FOR_PRIO 0
_USE_IOPROCS_ONLY NO
_IOPROCS_SWITCH 2
LRU_FOR_SCAN NO
_PAGE_SIZE 8192
_PACKET_SIZE 36864
_MINREPLY_SIZE 4096
_MBLOCK_DATA_SIZE 32768
_MBLOCK_QUAL_SIZE 16384
_MBLOCK_STACK_SIZE 16384
_MBLOCK_STRAT_SIZE 8192
_WORKSTACK_SIZE 8192
_WORKDATA_SIZE 8192
_CAT_CACHE_MINSIZE 262144
CAT_CACHE_SUPPLY 1632
INIT_ALLOCATORSIZE 221184
ALLOW_MULTIPLE_SERVERTASK_UKTS NO
_TASKCLUSTER_01 tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
_TASKCLUSTER_02 ti,100*dw;30000*us;
_TASKCLUSTER_03 compress
_DYN_TASK_STACK NO
_MP_RGN_QUEUE YES
_MP_RGN_DIRTY_READ NO
_MP_RGN_BUSY_WAIT NO
_MP_DISP_LOOPS 2
_MP_DISP_PRIO NO
XP_MP_RGN_LOOP 0
MP_RGN_LOOP 0
_MP_RGN_PRIO NO
MAXRGN_REQUEST 300
_PRIO_BASE_U2U 100
_PRIO_BASE_IOC 80
_PRIO_BASE_RAV 80
_PRIO_BASE_REX 40
_PRIO_BASE_COM 10
_PRIO_FACTOR 80
_DELAY_COMMIT NO
_SVP_1_CONV_FLUSH NO
_MAXGARBAGE_COLL 0
_MAXTASK_STACK 400
MAX_SERVERTASK_STACK 100
MAX_SPECIALTASK_STACK 100
_DW_IO_AREA_SIZE 50
_DW_IO_AREA_FLUSH 50
FBM_VOLUME_COMPRESSION 50
FBM_VOLUME_BALANCE 10
_FBM_LOW_IO_RATE 10
CACHE_SIZE 10000
_DW_LRU_TAIL_FLUSH 25
XP_DATA_CACHE_RGNS 0
_DATA_CACHE_RGNS 8
XP_CONVERTER_REGIONS 0
CONVERTER_REGIONS 8
XP_MAXPAGER 0
MAXPAGER 11
SEQUENCE_CACHE 1
_IDXFILE_LIST_SIZE 2048
_SERVER_DESC_CACHE 74
_SERVER_CMD_CACHE 22
VOLUMENO_BIT_COUNT 8
OPTIM_MAX_MERGE 500
OPTIM_INV_ONLY YES
OPTIM_CACHE NO
OPTIM_JOIN_FETCH 0
JOIN_SEARCH_LEVEL 0
JOIN_MAXTAB_LEVEL4 16
JOIN_MAXTAB_LEVEL9 5
_READAHEAD_BLOBS 25
RUNDIRECTORY /var/opt/sdb/data/wrk/EVERW_B6
OPMSG1 /dev/console
OPMSG2 /dev/null
_KERNELDIAGFILE knldiag
KERNELDIAGSIZE 800
_EVENTFILE knldiag.evt
_EVENTSIZE 0
_MAXEVENTTASKS 1
_MAXEVENTS 100
_KERNELTRACEFILE knltrace
TRACE_PAGES_TI 2
TRACE_PAGES_GC 0
TRACE_PAGES_LW 5
TRACE_PAGES_PG 3
TRACE_PAGES_US 10
TRACE_PAGES_UT 5
TRACE_PAGES_SV 5
TRACE_PAGES_EV 2
TRACE_PAGES_BUP 0
KERNELTRACESIZE 653
EXTERNAL_DUMP_REQUEST NO
_AK_DUMP_ALLOWED YES
_KERNELDUMPFILE knldump
_RTEDUMPFILE rtedump
_UTILITY_PROTFILE dbm.utl
UTILITY_PROTSIZE 100
_BACKUP_HISTFILE dbm.knl
_BACKUP_MED_DEF dbm.mdf
_MAX_MESSAGE_FILES 0
_EVENT_ALIVE_CYCLE 0
_SHAREDDYNDATA 10280
_SHAREDDYNPOOL 3658
_SHMKERNEL 91663
DIAG_HISTORY_NUM 2
DIAG_HISTORY_PATH /var/opt/sdb/data/wrk/EVERW_B6/DIAGHISTORY
_DIAG_SEM 1
SHOW_MAX_STACK_USE NO
LOG_SEGMENT_SIZE 6666
SUPPRESS_CORE YES
FORMATTING_MODE PARALLEL
FORMAT_DATAVOLUME YES
LOAD_BALANCING_CHK 0
LOAD_BALANCING_DIF 10
LOAD_BALANCING_EQ 5
HS_STORAGE_DLL libhsscopy
HS_SYNC_INTERVAL 50
USE_OPEN_DIRECT NO
SYMBOL_DEMANGLING NO
EXPAND_COM_TRACE NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC YES
OPTIMIZE_JOIN_PARALLEL_SERVERS 0
OPTIMIZE_JOIN_OPERATOR_SORT YES
OPTIMIZE_JOIN_OUTER YES
JOIN_OPERATOR_IMPLEMENTATION IMPROVED
JOIN_TABLEBUFFER 128
OPTIMIZE_FETCH_REVERSE YES
SET_VOLUME_LOCK YES
SHAREDSQL NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT 1500
SHAREDSQL_COMMANDCACHESIZE 32768
MEMORY_ALLOCATION_LIMIT 0
USE_SYSTEM_PAGE_CACHE YES
USE_COROUTINES YES
USE_STACK_ON_STACK YES
USE_UCONTEXT YES
MIN_RETENTION_TIME 60
MAX_RETENTION_TIME 480
MAX_SINGLE_HASHTABLE_SIZE 512
MAX_HASHTABLE_MEMORY 5120
HASHED_RESULTSET NO
HASHED_RESULTSET_CACHESIZE 262144
AUTO_RECREATE_BAD_INDEXES NO
LOCAL_REDO_LOG_BUFFER_SIZE 0
FORBID_LOAD_BALANCING YES
SIMULATE_VECTORIO IF_OPEN_DIRECT_OR_RAW_DEVICE
Edited by: Michael Poetzsch on May 29, 2008 9:23 AM... will give "load_systab" a try (Since I have to go to the customer, it will take a few days until I can check it).
Kind regards
Michael
dbm.prt:
Date Time TID(hex) Typ MsgID Label Message
2005-06-23 13:59:54 0x000023e9 0 DBM command db_cold
2005-06-23 14:08:20 0x000023e9 0 DBM command medium_getall
2005-06-23 14:08:20 0x000023e9 ERR -24986 DBM ERR_NOMEDIA: media file not found
2005-06-23 14:09:09 0x000023e9 0 DBM command medium_getall
2005-06-23 14:09:09 0x000023e9 ERR -24986 DBM ERR_NOMEDIA: media file not found
2005-06-23 14:09:09 0x000023e9 0 DBM command medium_put "bu_20060523_1514_init" "BU_20050623_1319_compl" FILE DATA 0 8 NO NO ""
2005-06-23 14:10:07 0x000023e9 0 DBM command medium_put "bu_20060523_1514_init" "BU_20050623_1319_compl" FILE DATA 0 8 NO NO ""
2005-06-23 14:10:16 0x000023e9 0 DBM command db_activate_req
2005-06-23 14:10:27 0x000023e9 0 DBM command backup_reply_receive
2005-06-23 14:10:36 0x000023e9 0 DBM command db_warm
2005-06-23 14:10:37 0x000023e9 0 DBM command dbm_configset -raw
2005-06-23 14:59:08 0x000023e9 0 DBM command db_cold
2005-06-23 14:59:19 0x000023e9 0 DBM command db_stop
2005-06-23 15:02:50 0x00002adf 0 DBM command db_offline
2005-06-23 15:50:45 0x00001ad5 0 DBM command db_warm
2005-06-27 13:28:22 0x000040db 0 DBM command db_offline
2005-06-27 15:14:50 0x00001c00 0 DBM command db_warm
2005-06-27 15:29:41 0x00001dc3 0 DBM command db_cold
2005-06-27 15:30:45 0x00001dc3 0 DBM command medium_put "bu_20050627_1143_ini" "BU_20050627_1143_compl" FILE DATA 0 8 NO NO ""
2005-06-27 15:30:57 0x00001dc3 0 DBM command recover_req "bu_20050627_1143_ini" DATA
2005-06-27 15:30:58 0x00001dc3 0 DBM command backup_reply_receive
2005-06-27 15:32:08 0x00001dc3 0 DBM command db_activate_req
2005-06-27 15:32:20 0x00001dc3 0 DBM command backup_reply_receive
2005-06-27 15:32:29 0x00001dc3 0 DBM command db_warm
2005-06-27 15:32:30 0x00001dc3 0 DBM command dbm_configset -raw
2005-06-27 16:30:28 0x00001dc3 0 DBM command param_getdevspace
2005-06-27 16:30:28 0x00001dc3 ERR -24996 DBM ERR_PARAM: wrong parameters
2005-07-05 09:51:41 0x00001dc3 0 DBM command db_cold
2005-07-05 10:36:46 0x000045fe 0 DBM command db_warm
2005-07-05 10:48:00 0x00004a45 0 DBM command db_offline
2005-07-05 10:49:07 0x00004acf 0 DBM command db_warm
2005-07-05 11:08:51 0x00001b22 0 DBM command db_warm
2005-07-05 11:19:30 0x00001ba2 0 DBM command db_offline
2005-07-05 11:19:38 0x00001bbf 0 DBM command db_warm
2005-07-05 11:22:04 0x00001c23 0 DBM command db_offline
2005-07-05 11:41:49 0x00002101 0 DBM command db_warm
2005-07-05 11:44:06 0x0000213c 0 DBM command db_offline
2005-07-05 11:44:28 0x00002158 0 DBM command db_warm
2005-07-05 11:54:24 0x000022c5 0 DBM command db_offline
2005-07-05 11:55:20 0x0000113f 0 DBM command db_warm
2005-07-05 11:57:22 0x00001af5 0 DBM command db_cold
2005-07-05 11:59:10 0x00001af5 0 DBM command medium_put "BU_20050705_0914_init" "BU_20050705_0914_compl" FILE DATA 0 8 NO NO ""
2005-07-05 11:59:21 0x00001af5 0 DBM command db_activate_req
2005-07-05 11:59:34 0x00001af5 0 DBM command backup_reply_receive
2005-07-05 11:59:45 0x00001af5 0 DBM command db_warm
2005-07-05 11:59:46 0x00001af5 0 DBM command dbm_configset -raw
2005-07-08 09:16:37 0x00001f21 0 DBM command db_offline
2005-07-08 09:24:30 0x0000147e 0 DBM command db_warm
2005-07-08 09:44:17 0x00001f90 0 DBM command db_offline
2005-07-08 09:45:22 0x0000140a 0 DBM command db_warm
2005-07-08 11:04:12 0x000022f3 0 DBM command db_offline
2005-07-08 11:17:07 0x00001130 0 DBM command db_warm
2005-07-08 12:20:36 0x00001b9d 0 DBM command db_cold
2005-07-08 12:21:12 0x00001b9d 0 DBM command medium_put "BU_20050708_0742_init" "BU_20050708_0742_compl" FILE DATA 0 8 NO NO ""
2005-07-08 12:21:19 0x00001b9d 0 DBM command db_activate_req
2005-07-08 12:21:30 0x00001b9d 0 DBM command backup_reply_receive
2005-07-08 12:21:34 0x00001b9d 0 DBM command db_warm
2005-07-08 12:21:36 0x00001b9d 0 DBM command dbm_configset -raw -
hi, i set up the mail at home, now move the mac to office, i cannot get any new emails now. anyone know why and how to do?
Connection Doctor
<http://support.apple.com/kb/TS3276> -
I cannot restart my IPad 2 ... I tried to power down it but now cannot restatrt it.... The cursor is simply rotating ...
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps. -
My iPad hang and i can't restart it. how to solve it?
my iPad hang and i can't restart it. how to solve it?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!
I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.
-
My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem
Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
i press restore then my ipad mini thr say cannot updated at this time because iPad software update server could not be contracted or is temporarily unavailable..how to solve it?
Are you trying to restore via itunes or icloud? Which ever one you're doing, try the other.
Its most important to make sure itunes is updated, any security software is disabled, and to try another usb port/cord (if using itunes on a computer)
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US
If all else fails, try another computer. (or network, if using icloud). -
I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I've also seen it suggested that people try downloading a free app from the store onto the iPad (as that seems to reset something), and then re-try the apps - the free app can then be deleted. -
I downloaded an app 5 years ago on my iPhone with another Apple ID that I cannot get into now because I forgot the ID. I'd like to download the same app on my iPad now. The developer says it should be no problem. Any ideas how to solve this?
It will be tied to your old account, so only that old account will be able to re-download it - but redownloading an account's past purchases may tie a computer or device to the account for 90 days : http://support.apple.com/kb/HT4627
Do you have a copy of it anywhere e.g. on your computer's iTunes, or on a backup of your library ? If you have it on a backup then you should be prompted to authorise the account (and I think that the id will show) if you try to add it to your computer's iTunes via File > Add To Library. -
Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?
Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
Tap Settings > General > Reset > Erase all content and settings. -
Please I just got an iPad 3 and it keeps restarting itself. How do I stop this. Done hard reset and system reset.
iTunes: Restoring iOS software
You will probably need to restore using Recovery Mode.
iPad: Unable to update or restore
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Maybe you are looking for
-
Windows 8.1 Bootcamp wont Sleep or adjust Brightness
Hey Guys, I installed windows 8.1 via bootcamp onto my 2013 rMBP, 16gig Ram, Upgraded Processor, and I have two issues with it. 1. I cannot adjust my screen brightness, which is manageable but annoying. 2. It wont go to sleep. There isnt an option an
-
Multi-Select (drop down list) data not saving upon save/email
I have created a drop down list and modified it to allow multiple selection, i.e. form1.BusinessAreaTable[1].Row1[4].ERP::ready:form - (JavaScript, client) this.ui.choiceList.open= "multiSelect"; this.rawValue = "-1" However, when I go to save the fo
-
Do we always have to include DTD in an XML file?? i know this sounds kind of trivial :) but if someone wanna earn some duke dollar,by all means...
-
Drag and Drop stops working!
I have been using various versions of Final Cut for the last several years, and other similar video editors for much longer (finally left the world of the PC for video editing a few years ago!). I am excited by Final Cut Pro X and am learning it quic
-
Hi i got an ipod video from my brother for christmas, which is a huge step up from my old nano. i had downloaded some songs over the last few months and put them on my nano, however they are not in my library any more. i want to put them on my video