I cannot start the "SQL Server Reporting Services (SCE)" service
Attempts to run any of the Windows Computer Reports fail with an error:
Date: 10/29/2008 10:19:30 AM
Application: System Center Essentials
Application Version: 6.0.1251.0
Severity: Error
Message: Cannot initialize report.
Microsoft.Reporting.WinForms.ReportServerException: The Report Server Windows service 'ReportServer$SCE' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable)
at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
at Microsoft.Reporting.WinForms.ServerReport.GetParameters()
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args)
My attempts to start the "SQL Server Reporting Services (SCE)" service fail with an error:
Could not start the SQL Server Reporting Service (SCE) service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
The application log in the event viewer has hundreds of instances of Event ID 107:
Event Type: Error
Event Source: Report Server (SCE)
Event Category: Management
Event ID: 107
Date: 10/29/2008
Time: 10:36:25 AM
User: N/A
Computer: DC
Description:
Report Server (SCE) cannot connect to the report server database. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help.
Thanks for the link to the Reporting Services forum. I found the fix in this thread:
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3644545&SiteID=1
I had to create a registry key and reboot:
1.
Click Start, click Run, type regedit, and then click OK.
2.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3.
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
a.
On the Edit menu, point to New, and then click DWORD Value.
b.
Type ServicesPipeTimeout, and then press ENTER.
4.
Right-click ServicesPipeTimeout, and then click Modify.
5.
Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before a service times out.
6.
Restart the computer.
After the reboot, the service was running. Thanks for your help with this.
Similar Messages
-
Cannot start the SQL server service after you install Active Directory
Good Morning,
Im the system admin for a small company. We have a dedicated domain controller but it is the only one. To get a second domain controller up and running on our domain, I installed the AD role on our file and SQL server. After the reboot
we couldnt get SQL up and running. I found this article
http://support.microsoft.com/kb/929665
In the article it reads
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec /i SSEE_10.msi CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <var><Log_File_Path></var>
My question is what is the Log_File_Path? Is that where I installed the AD log path?
My DBA is also looking into this as well.
Thanks in advance,
Brian
Brian Fink, MCSEHi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
The SQL Server Reporting Services (MSSQLSERVER) service hung on starting.
Hi experts,
The SQL Server Reporting Services (MSSQLSERVER) service hung on starting.
we are receving these errors twice per week.
colud you share solution.Hi vijay_1234,
When you try to start SSRS, are you receive a time-out error or other errors?
To work around this problem, we can configure the computer so that the network does not retrieve trusted and untrusted CTLs. Please use one of the following methods:
Change the Group Policy settings.
Modify the registry.
Increase the default service time-out.
For more details, please refer to the following KB:
http://support.microsoft.com/kb/2745448
If the issue is still existed, please check RS Logs in the C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer
I have 2 instance of SQL Server in same server. A is installed first and B next.
Somehow A cannot start at all when I try to start from Windows Services.
B can be started normally.
A worked normally week ago. There has been only one thing what I may have to server since that.
I have installed MondoDB. Currently MondoDB it is stopped.
windows could not start the SQL Server (MSSQLSERVER) service on Local computer
Error 31: A device attached to the system is not functioning.
Kenny_II don't see anything special in event logs.
Data file of both SQL Server instance are located on same C drive of same server.
Kenny_I
Hello Kenny,
The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
I serached
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I am trying to install TFS 2012 update 4 on single server installation.
I am getting below error:
TF400525: Make sure the SQL Server Reporting Services service for this instance is running.Hi CFSA,
Thanks for your post.
If you want install TFS 2012 Server with Reporting Server, you must ensure the provided Reporting Services is running first.
As Daniel said, please check that in SQL Server Configuration Manager to ensure Reporting Services is installed and running.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot start the presentation server
Linux OS
OBIEE 11.1.1.5.0
Weblogic Server 10.3.5.0
OBIEE gurus,
I cannot start the presentation server via EM or via the command line ./opmnctl startproc ias-component=coreapplication_obips1.
I get the error in the comman line:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=****:9501
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=2107403675,pid=27813)
failed to start a managed process after the maximum retry limit
Log:
$ORACLE_INSTANCE/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
I have checked the log above which contains:
13/07/18 15:27:07 Start process
13/07/18 15:27:14 Start process
13/07/18 15:58:53 Start process
13/07/18 15:59:00 Start process
Not very helpful!
I have checked the OPMN log at $ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn/opmn.log which has the following errors:
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:58][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
I have tried refreshing the user GUIDS, loading another rpd file in through EM that I know works fine in another environment, cleaning the permissions in the web catalog but all so dar have not resulted in me being able to start the presentation server.
I would welcome any feedback on this as it is driving me crazy!
Thanks in anticipation.Hi ,
I tried it but no use. That thread had some errors displayed in it. But i get just a warning.
Pls help
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:41 2010
File: project/sawserver/sawserver.cpp Line: 604
Properties: ThreadID-1532
Location:
saw.sawserver
saw.sawserver.terminatesawserver
saw.threads
Oracle BI Presentation Services are shutting down.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Warning
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-968
Location:
saw.webextensionbase.init.workstationCheck
saw.webextensionbase.init
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 459
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services have started successfully.
Thanks
Jaan -
The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
hi Guys,
working on below error if anyone has work around.
It is on SQL Server 2012 cluster.
The SQL Server specified in Integration Services service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring
the Integration Services Service" in SQL Server 2012 Books Online.
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachHi Logicinisde,
This issue might be caused that we install named instance on the machine, or the default instance listening a different port rather than the default one.
To solve this issue, please refer to the following article for detail information:
http://blog.sql-assistance.com/index.php/there-is-no-default-instance
Regards,
Elvis Long
TechNet Community Support -
I cannot start the Utility on a Win 7 service pack 1 machine
I cannot start the Utility on a Win 7 service pack 1 machine
hi HaoleBoy,
Welcome to the Forums.
I've worked with lenovo models that has an embedded Intel HD Graphics (these are units with core i3/i5/i7 CPU) but never ecountered a problem on them in installing Win7 SP1.
If you have one of these units, can you try to:
1. Update your Intel HD Graphics driver by running the Intel® Driver Update Utility (newest driver is v15.28.15.64.3062 (9.17.10.3062)
2. Download and install the Windows 7 SP1 Standalone Installer (choose the windows6.1-KB976932-X64.exe 903.2 MB for Win7 64bit)
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Can't Start the SQL Server & SQL Server Agent Services
Hello i had to make a copy of my setup for a coworker in a different country to work with i can't make this two services to start. A timed out error shows and maybe the logs say something but i can't understand it.
Help Please.
2014-10-31 12:18:55.66 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2014-10-31 12:18:55.69 Server (c) Microsoft Corporation.
2014-10-31 12:18:55.69 Server All rights reserved.
2014-10-31 12:18:55.69 Server Server process ID is 2540.
2014-10-31 12:18:55.69 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2014-10-31 12:18:55.69 Server Authentication mode is MIXED.
2014-10-31 12:18:55.69 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-10-31 12:18:55.69 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-10-31 12:18:55.69 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-10-31 12:18:55.69 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
2014-10-31 12:18:56.21 Server SQL Server detected 1 sockets with 2 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message; no user action is required.
2014-10-31 12:18:56.21 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-31 12:18:56.21 Server Detected 3071 MB of RAM. This is an informational message; no user action is required.
2014-10-31 12:18:56.21 Server Using conventional memory in the memory manager.
2014-10-31 12:18:58.04 Server This instance of SQL Server last reported using a process ID of 2532 at 31/10/2014 12:18:20 p.m. (local) 31/10/2014 06:18:20 p.m. (UTC). This is an informational message only; no user action is required.
2014-10-31 12:18:58.05 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2014-10-31 12:18:58.07 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-10-31 12:18:58.08 Server Software Usage Metrics is disabled.
2014-10-31 12:18:58.15 spid5s Starting up database 'master'.
2014-10-31 12:18:58.71 Server CLR version v4.0.30319 loaded.
2014-10-31 12:18:59.22 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-10-31 12:18:59.24 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-10-31 12:18:59.81 spid5s SQL Trace ID 1 was started by login "sa".
2014-10-31 12:18:59.98 spid5s Server name is 'WIN-3FNEFF25D4V'. This is an informational message only. No user action is required.
2014-10-31 12:19:00.76 spid13s A self-generated certificate was successfully loaded for encryption.
2014-10-31 12:19:00.80 spid13s Server is listening on [ 'any' <ipv6> 1435].
2014-10-31 12:19:00.80 spid13s Server is listening on [ 'any' <ipv4> 1435].
2014-10-31 12:19:00.80 spid13s Server is listening on [ 'any' <ipv6> 1433].
2014-10-31 12:19:00.80 spid13s Server is listening on [ 'any' <ipv4> 1433].
2014-10-31 12:19:00.80 spid13s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2014-10-31 12:19:00.80 spid13s Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2014-10-31 12:19:00.80 Server Server is listening on [ ::1 <ipv6> 1434].
2014-10-31 12:19:00.80 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2014-10-31 12:19:00.80 Server Dedicated admin connection support was established for listening locally on port 1434.
2014-10-31 12:19:00.81 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
2014-10-31 12:19:00.81 spid13s SQL Server is now ready for client connections. This is an informational message; no user action is required.
2014-10-31 12:19:00.81 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/WIN-3FNEFF25D4V ] for the SQL Server service. Windows return code: 0xffffffff, state: 63. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
2014-10-31 12:19:00.81 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/WIN-3FNEFF25D4V:1433 ] for the SQL Server service. Windows return code: 0xffffffff, state: 63. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
2014-10-31 12:19:00.86 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-10-31 12:19:22.49 spid15s A new instance of the full-text filter daemon host process has been successfully started.
2014-10-31 12:19:22.68 spid17s Starting up database 'msdb'.
2014-10-31 12:19:22.69 spid9s Starting up database 'mssqlsystemresource'.
2014-10-31 12:19:22.69 spid18s Starting up database 'CMOVILBD'.
2014-10-31 12:19:22.69 spid19s Starting up database 'ArgusTec'.
2014-10-31 12:19:22.71 spid9s The resource database build version is 11.00.2100. This is an informational message only. No user action is required.
2014-10-31 12:19:22.90 spid9s Starting up database 'model'.
2014-10-31 12:19:23.36 spid9s Clearing tempdb database.
2014-10-31 12:19:23.46 spid9s Starting up database 'tempdb'.
2014-10-31 12:19:23.67 spid20s The Service Broker endpoint is in disabled or stopped state.
2014-10-31 12:19:23.67 spid20s The Database Mirroring endpoint is in disabled or stopped state.
2014-10-31 12:19:23.73 spid20s Service Broker manager has started.
2014-10-31 12:19:24.67 spid5s Recovery is complete. This is an informational message only. No user action is required.
2014-11-01 00:00:08.70 spid28s This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
2014-11-02 00:00:23.48 spid29s This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
2014-11-03 00:00:53.66 spid29s This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
2014-11-04 00:00:08.08 spid19s This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
2014-11-04 18:03:23.74 spid53 Attempting to load library 'xpsqlbot.dll' into memory. This is an informational message only. No user action is required.
2014-11-04 18:03:23.79 spid53 Using 'xpsqlbot.dll' version '2011.110.2100' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2014-11-04 18:03:24.72 spid54 Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2014-11-04 18:03:24.78 spid54 Using 'xpstar.dll' version '2011.110.2100' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2014-11-04 18:03:27.74 spid53 Starting up database 'Argus'.
2014-11-04 18:28:12.10 spid52 Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
2014-11-04 18:28:12.13 spid52 Using 'xplog70.dll' version '2011.110.2100' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2014-11-05 00:00:26.82 spid18s This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.Sorry i feel so stupid. Here it is. I can clearly see the errors now
2014-11-05 10:49:47.43 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (X64)
Mar 29 2009 10:11:52
Copyright (c) 1988-2008 Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (VM)
2014-11-05 10:49:47.43 Server (c) 2005 Microsoft Corporation.
2014-11-05 10:49:47.43 Server All rights reserved.
2014-11-05 10:49:47.43 Server Server process ID is 4596.
2014-11-05 10:49:47.43 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2014-11-05 10:49:47.43 Server Authentication mode is MIXED.
2014-11-05 10:49:47.43 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2014-11-05 10:49:47.43 Server This instance of SQL Server last reported using a process ID of 5720 at 05/11/2014 10:28:35 a.m. (local) 05/11/2014 04:28:35 p.m. (UTC). This is an informational message only; no user action is required.
2014-11-05 10:49:47.43 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2014-11-05 10:49:47.44 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-11-05 10:49:47.44 Server Detected 2 CPUs. This is an informational message; no user action is required.
2014-11-05 10:49:47.46 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-11-05 10:49:47.49 Server Node configuration: node 0: CPU mask: 0x0000000000000003 Active CPU mask: 0x0000000000000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2014-11-05 10:49:47.50 spid7s Starting up database 'master'.
2014-11-05 10:49:47.59 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-11-05 10:49:47.60 spid7s SQL Trace ID 1 was started by login "sa".
2014-11-05 10:49:47.60 spid7s Starting up database 'mssqlsystemresource'.
2014-11-05 10:49:47.61 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2014-11-05 10:49:47.67 spid7s Server name is 'WIN-3FNEFF25D4V\SQLEXPRESS'. This is an informational message only. No user action is required.
2014-11-05 10:49:47.67 spid10s Starting up database 'model'.
2014-11-05 10:49:47.68 spid7s Informational: No full-text supported languages found.
2014-11-05 10:49:47.68 spid7s Starting up database 'msdb'.
2014-11-05 10:49:47.76 spid10s Clearing tempdb database.
2014-11-05 10:49:47.83 Server A self-generated certificate was successfully loaded for encryption.
2014-11-05 10:49:47.83 Server Error: 26023, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server Server TCP provider failed to listen on [ 'any' <ipv6> 1433]. Tcp port is already in use.
2014-11-05 10:49:47.83 Server Error: 17182, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa. Reason: Unable to initialize the TCP/IP listener.
2014-11-05 10:49:47.83 Server Error: 17182, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors.
2014-11-05 10:49:47.83 Server Error: 17826, Severity: 18, State: 3.
2014-11-05 10:49:47.83 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-11-05 10:49:47.83 Server Error: 17120, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems. -
While i am trying to start the sql server agent job getting the error
Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.
I searched net for this type of error and found that Latest SP can fix this issue.See below link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/12181324-bc51-41a5-a8a5-608bfe2725e9/could-not-load-type-smoagentjobbasecollection?forum=sqlsmoanddmo
Can you also refer to this link
http://www.sqldbadiaries.com/2010/12/20/could-not-load-file-or-assembly-error-while-using-tdp-makes-a-come-back/
Also please see this connect also
http://connect.microsoft.com/SQLServer/feedback/details/280907/sql-agent-job-actions-fail-from-job-activity-monitor
hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
How to fix , when start the SQL Server Fulltext Search show error ?
show error : the request failed or the service did not respond in a timely fashion
Hi srajmuneer,
Please post the detail Windows Application Error Log regarding this issue for fur investigation. In addition, please also try to update "K10\Administrator" account password for SQL Server FullText Search service.
Hope this helps.
Regards,
Elvis Long
TechNet Community Support -
System.InvalidOperationException: Cannot start service ReportServer on computer ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at System.ServiceProcess.ServiceController.Start()
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
Services
Could not start the SQL Server Reporting Services (MSSQLSERVER) service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
OK
Report Server (MSSQLSERVER) cannot connectrty to sta to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
eventid=107check the following link
http://support.microsoft.com/kb/839174?wa=wsignin1.0
http://support.microsoft.com/kb/886695
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread. -
Symptom: Sometimes, when you want to reinstall the Reporting Server Role for Operation Manager 2012,
but you may encounter an issue that the Reporting Server Role cannot be reinstalled after you successfully uninstall it. When you check the System Center Operation Manager installation log, you can find the following error as shown in Figure 1.
Figure 1: Reporting Server Role cannot be reinstalled
It seems that the SQL Server Reporting Service has not been configured properly. When you open Reporting Services Configuration Manager to check the settings, the settings seem fine though.
Even you recreate Reporting Service Database, the error remains.
After reviewing the OpsMgrSetupWizard.log, we get the following errors when wizard try to connect to SQL Server Reporting Instance (Figure 2).
[07:24:05]: Error: :CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message:
The remote server returned an error: (500) Internal Server Error.
[07:24:05]: Error: :StackTrace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String
httpSite)
Figure 2: Error Log -1
It indicates the Reporting Service encounters an internal error. The Website cannot handle the request. So you may check the Reporting Service log which is located in C:\Users\Administrator.SCOM2012\AppData\Local\SCOM\LOGS
and the following errors may be found (Figure 3).
library!ReportServer_0-18!1448!03/30/2014-02:53:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
Unable to load assembly Microsoft.EnterpriseManagement.Reporting.Security, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ---> System.IO.FileNotFoundException:
Could not load file or assembly 'Microsoft.EnterpriseManagement.Reporting.Security' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Reporting.Security'
Figure 3: Error Log -2
Reason: After the Reporting Server is installed on a SSRS instance, the Reporting Server of SCOM
needs to modify the web.config and rsreportserver.config file to add its own assembly to make the Reporting Server work. But it does not change it back when Reporting Server is uninstalled. So the assembly cannot be loaded and the SSRS cannot respond
our requests.
Resolution: When the Reporting Server is installed, the old web.config and rsreportsserver.config
files will be backed up to web.config1 and rsreportsserver.config1. So you just need to change the files’ name back, then try to install Reporting Server of SCOM again. Everything would go smoothly.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hi AakashGhare,
According to your error message, SQL Server 2008 databases are version 655. SQL Server 2008 R2 databases are 661. When you are trying to attach an 2008 R2 database (v. 661) to an 2008 instance and this is not supported. As other post, once the database has
been upgraded to an 2008 R2 version, it cannot be downgraded. You'll have to either upgrade your 2008 SP2 instance to R2, or you have to copy out the data in that database into an 2008 database (such as using the data migration wizard).
In addition, if you want to use a Windows Batch file code and command to automatically login to SQL Server, detach database and attach a new one database, there is a similar details about batch code for attaching database to a new database, you can refer
to this article.
http://notesbyparth.wordpress.com/2012/06/29/run-sql-commands-from-windows-batch-file-or-attachdetach-database-automatically-using-batch-script/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hello,
We have configured SharePoint site and SSRS for a team project.
Foll. is the SharePoint site for the team project. When we click on the REPORTS link, it redirects us to the SQL Server Reporting Services website.
My question is: How can I show or publish the reports from SQL Server Reporting Services into SharePoint so that I can view the reports on SharePoint dashboard rather than having to go to the SSRS URL?Hi Nachiket,
If you configure Reporting service for your TFS, then you can view the reports in report manger site when you click click report on Team Explorer. And SharePoint is a collaboration website product that offers deep integration with Office products like Word,
Outlook, and Excel. You can save your team project related files in your SharePoint site. Check this
page for more details.
If you want to view reports that generated by reporting service on your SharePoint site, you might need to save the report in Excel and upload it to SharePoint site.
Best regards,
Maybe you are looking for
-
Sharepoint 2013 :Content Search Web part Property Filter By Query String - How to use ?
Hi, I would like to filter data that is displayed in content search web part by using URL. I tried to use Value of a parameter from a URL - Query String.Parameter1 But have no idea how to use it. Can someone help me pleas ?
-
Finder - Get Info - changing "Open With"
In the Finder, I accidentally changed the default application specified to open a .nib file. How do I change it back to <NONE>. It is a system file. Powerbook G4 Titanium (DVI) Mac OS X (10.4.4)
-
Transient Entity Attribute as an Assoc
Can I use a transient Entity attribute as an Assoc? I created an Attribute at the Entity level that is not mapped to a table. The entity is called FirstEndEntity. Then I created an Association between FirstEndEntity and OtherEndEntity. I used the att
-
IPad and wireless keyboard won't go to sleep
I just got my iPad, and it's working great. But I'm a little confused about sleep mode. When I pull my MagicCover across the screen, does it automatically go to sleep? And it should automatically wake up when I remove the MagicCover, right? In fact,
-
Serial Required for Each Client
I think I made a mistake, or I just wasn't thinking. I have 4 xServes that I was planning to set up as a SAN. Do I have to have 4 separate copies of xSAN for each xServe that I will have connected to the SAN? I can't use 1 Serial for all 4 machines,