I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress

I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress whatsoever. When I export with lightroom 4 trial, no problem.
Social media marketing is an important part of my business as a photographer, so it is very important for me to make this work.
Thank you for your help.
- Reinhard

The uploaded file has 389kb... Wordpress accepts everything up till 1mb
error message (see image) is german saying 'bei dem upload ist ein fehler aufgetreten. Probier es später nochmal.' In english should by something like 'there was an error while uploading. Try again later.'
is definitely a adobe problem, because I tried the exact same foto with same export settings, and it works well with lightroom 4 as well as photoshop cs5, but neither lightroom 5 nor photoshop cs6...

Similar Messages

Strange cropping activity from photoshop cs6 to lightroom 4.3

i have never noticed the following activity:
I edited, including cropping, an image in photoshop CS6. I saved the image as a tif and also as a psd. Both sent to a folder which exists in LR catalog. Both images were revealed in LR with the SYNCHRONIZE FOLDER command.
Both images are shown in the appropriate folder, BUT BOTH ARE CROPPED MUCH MORE THAN was done in CS6 editing. Approx 1 inch has been removed along the left side (long dimension) of both images as compared to the dimensions in CS6. They happen to be sitting next to the original image in the LR catalog and it is easy to see the unwanted change. The route from CS6 to LR 4.3 was what I normally use.
WHAR COULD HAVE CAUSED THE APPARENT ADDITIONAL CROPPING SEEN IN LR. Developing in LR crop does allow the image to be restore to proper dimensions by expanding the cropped edge.
wonder if this makes any sense?
I have probably set a switch wrong in LR but cannot find my error. Photoshop seems to have performed flawlsessly.
I use iMac, i7, 10.8.2, 16GB ram.
vince
Message was edited by: vinsolo
Message was edited by: vinsolo

thank you cornelia, for your reply.
I really have no workflow as I rarely do more than retouching of photos for others, each of which usually requires an irregular, often trial-by-error workflow. Most of these images are in very poor condition and are less than well photographed.
The "future project" was really a shortcut to say that i suspected that my client cannot open PSD on her machine and I wanted to have tiffs available for her.
I am afraid that i have not clearly described what i saw happen. And, it continues to occur with this single image after repeat tests of the same procedure. NONE of the other images in that folder, or any other image I have, responded in the way I attempted to describe. Probably user error-I guess I will never know!
In any case, I am very grateful that your had the time to respond.
vince

I cannot find 3d on Photoshop cs6 extended yes it is extended

I cannot find 3d on Photoshop cs6 extended Yes it is extended

Hello there!
Could you be more specific on your issue? are you on CS6? Could you also post a screenshot of your issue?
Try this link for more information: http://helpx.adobe.com/photoshop/using/3d-workflow-cs6.html
Below is a layer i would like to make 3D:
i can bring forward the 3D panel by going to Window> 3D, as shown below.
OR with the layer selected, i can go to the top menu, 3D > New 3D Extrusion from Selected Layer
This transforms my letter into 3D, as shown below.
Are you able to see the above 3D menu and window panel? Please post back.
Janelle

I cannot upload photos from iPhoto 9 to Flikr. When I attempt to do so, I get the message "the login details or auth token passed were invalid." Please help.

I cannot upload photos from iPhoto 9 to Flikr. When I try, I get the message "the login details or auth token passed were invalid." I am using iPhoto 9 version 8.1.2, and my OS is 10.9.5. My computer is a MacBook Pro. I do not have this trouble with my iMac. This trouble started before I updated to OS10.9.5. I do not have this problem when uploading to FaceBook or sending by e-mail.
This problem started when I tried to upload some photos after hitting the "use other account" tab. This took me to a Flikr site asking me for permission to make my iPhoto information available to others. I clicked "yes," and then I changed my mind and clicked "no." I haven't been able to upload to Flikr since.
I searched Flikr and Yahoo for a solution, and Yahoo says the trouble is in iPhoto. I checked my Flikr account, and iPhoto extensions are enabled.
I need to upload some school and alumni photos, so I sure could use some help. I am Not computer proficient. Thank you.

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

I have Photoshop CS5, and use windows XP. I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years. When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but the problem remains. Looking for help. Dan

Thanks for your response, I was able to open bridge from File-Browse in Bridge. This worked, but was not able to go back to the way I always opened Bridge. At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu. The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal. This time it did not go back to normal after several attempts. I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens. And yes I am using Mini Bridge in photoshop CS5. Thank you for your help. Dan

I cannot launch bridge from photoshop cc 2014

I cannot launch bridge from photoshop cc 2014

If you have downloaded and installed Bridge CC and it worked with Photoshop CC,
a common reason for this happening in CC 2014, is that you might have uninstalled Photoshop CC. If that's so, you need to reinstall Photoshop CC.
Gene

How do I upload fotos from iPhone and store on computer?

I need to know how to upload fotos from my fone and store on my computer

Use PhotoStream
Or
Sync using iTunes
Or
Sync using a USB cable connection
LN

I can't open Bridge and Mini Bridge from Photoshop CS6 (64bit)

I can't open Bridge CS6 64(Bit) and Mini Bridge from Photoshop CS6 (64bit), I get an error message (APPCRASH ). I can open only Bridge (32bit) as a stand alone program.
Operating system Windows 7 (64bit).

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Mylenium

Why are 3D objects incredibly small when exported from Photoshop CS6?

When I attempt to export 3D objects for use in Apple's iBooks Author software—say, a Collada 3D model of Earth for a children's science book—from Photoshop CS6, the object comes out impossibly small or completely invisible. It will work just fine in Photoshop, but if I view it in Finder using Quick Look, open it in Preview, or drop it into an iBooks Author project, the object appears so small that it's useless. No amount of scaling it in said software corrects the issue, either.
What happened? Is there a new export preset I'm missing? I used this exact same process in Photoshop CS5, and it worked wonderfully.
Thank you!

HI,
Am also having similar problem with exporting 3d model into ibook or iauthor.
Any help ?

Printing from Photoshop CS6

Having problems printing from photoshop cs6 the colors are way off. How do you collebrate the printer to print whats on screen?

you are going to have to try and match your printer colors to the image colors. many questions involving color management and your settings in PS: is CMYK set? set your "printer handles colors"?
for color management:
1. calibrate and profile your monitor
2. set up an image color space
3. configure your printer driver for the print.
reference this link:
http://www.graphics.com/modules.php?artid=736&name=Sections&op=viewarticle
http://www.computer-darkroom.com/ps10_print/ps10_print_1.htm
take a look at the links-
-janelle

Converting to Photoshop CC from Photoshop CS6

If I convert to Photoshop CC from Photoshop CS6 will I have to uninstall the CS6 version or could it continue to run alongside CC?

If you want it can stay installed. It is installed in a separate folder, so they do not affect each other.

I can not longer print from photoshop CS6

I get an error message when I try to print from photoshop CS6
Nothing I've done has helped.

These suggestions are not the problem and I have contacted HP and they have run all the diagnostics and they say the problem is not with the printer or the software. All other browsers print, just not Mozilla

U3d removed from Photoshop CS6

There's a thread on the photoshop.com forum regarding the removal of U3D support, but if I try to sign up to comment there, I get a message saying that registration is no longer possible for their forum, so I'm posting this here...
With version 13.0.2, U3D support was REMOVED from Photoshop CS6.
3D is becoming an increasingly popular format to provide for our clients. I work in a prepress environment. The whole suite of Adobe products is integral to a prepress workflow, but it seems that Adobe has been abandoning instead of embracing a growing movement towards 3D.
We started offering 3D pdfs to clients a few years ago and since then, Adobe has ceased developing Adobe Toolkit for 3D and Adobe Acrobat 3D. We actually have to hold on to old PCs running old OSes just so that we can still produce 3D pdfs. Since Toolkit and Acrobat 3D are now extinct, one workaround to getting U3Ds into Acrobat to make 3D pdfs was to export out of Photoshop. As of now, it is the only Adobe software that I'm aware of that was able to produce the only format (U3D) that Acrobat Pro was able to import, and now this very last option has been removed! Unbelievable, that as the demand for 3D in our business is growing exponentially, that Adobe has completely severed off it's last flimsy workaround for writing U3D files. There is now NO Adobe software that can make a U3D for bringing into Acrobat to make 3D PDFs. In other words, absolutely no way for someone using the latest batch of CS software to ever create a 3D PDF. Am I wrong? (Also, U3D was removed INTENTIONALLY?!) It seems that Adobe is purposefully destroying any/every method of creating 3D PDFs. So who's the genius that decided that 3D is on the way out? Our 3D department has been growing and getting busier over the last couple of years.
More importantly for me, I need to import a 3D in photoshop right now. Is there some other way to do it, other than uninstalling and bringing Photoshop back to version 13.0.1?

Bump, and I just tried logging in to http://feedback.photoshop.com/photoshop_family/topics/cant_export_u3d_files_in_photoshop_v 13_0_2 using the same login/pass that works just fine at this forum. At the above site, I still get the error message. If someone can pass on my message to the topic there, I'd be grateful.
I'm still hoping u3d support will be reinstated, and that 3d pdfs are saved from the brink of extinction by Adobe. Btw, if you do restore u3d support, please make it in a dot release so all CS6 users can get back what was removed in one of the previous dot releases (it still sounds ridiculous when I read it back to myself). It's only fair. If it becomes a "cloud" only thing it will only make Adobe look even worse, taking AWAY a functionality in a CS6 dot release and then reinstating it in a cloud release that I'd have to subscribe to. (I can't, I work in a large digital prepress company and we will only be getting the site version that we paid for)

Have IPAD 1 and since uploading os5 I cannot upload pictures from my Sony camera. Error message reads the USB is not compatable. I'm not sure about the new os, how do I go back to what worked?

Have an IPad 1 and since upgrading to os 5 nothing seems to be working as before. Current problem is I cannot upload pictures from my camera...error message "USB not compatable". Using Apple's converter...how do I go back to the old OS?

Nirve-
I do not think there will be any way to revert back to an earlier system.
The "current" problem with some cameras and card adapters resulted from Apple changing the amount of current available to USB devices, apparently to prevent them from running down the iPad's battery. It appeared when the iOS was updated from 3 to 4. On my iPad 2, I find that a little bit more current is available now under iOS 5.
One way to get around the problem is by using a powered USB hub. Another is to remove the card from the camera and use the SD adapter from the Camera Connection Kit. If your Sony used a CF card, then you will need to find a CF-to-USB adapter that does not draw too much current. I have one that works, but also have a couple that do not.
Fred

I cannot upload photos from my Canon EOS

I cannot upload photos from my Canon EOS. Are there any downloads or softwares that might help.?

iPhoto should Import. What are you trying to use? How are you doing it?

I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress

Similar Messages

Maybe you are looking for