I cant watch intsant movies on netflix. what can i do?

I can't watch netflix instant movies. What can I do?

Do you have the Silverlight player/plug-in installed?
http://blog.netflix.com/2008/10/opt-in-for-new-netflix-movie-player.html

Similar Messages

  • TS3354 so i cant watch my movies now because i dont have the next best computer thanks apple for screwing the guy with a perfectly working computer ... -.-

    i get the message cant be played without windows seven or hdmc format essentially so i cant watch my movies it works perfectly fine i just cant afford windows seven  or a new computer and mine runs great

    In order to get those to work you will have to upgrade to Snow Leopard 10.6.8.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard, preferably the full 10.6.8 combo updater.

  • I can't watch Instan Movies on Netflix (only when I'm on WI-FI)

    I have a Lenovo Thinkpad T400 Running Windows XP
    I can't watch instant movies on Netflix
    I have Silverlight installed
    The movie starts and plays for only a couple of seconds (minutes) and then I get the error (your internet connection slowed, re-adjusting settings...),
    I have another laptop at home using the same Wireless Network . The Wi-Fi Network is not the problem because the other laptop plays perfectly fine the same movie.
    After that IE freezes and I have to kill the browser using XP Admin Console
    Is this a known issue? t400 supports silverligth? Do I have to update wireless card drivers?
    Thanks in advance
    Rafael

    If you run System Update, it should update any drivers, or you can check the Lenovo support site.
    With Wifi routers, it is also worth checking your router for a firmware update as this sometimes fixes things.

  • My iMac plays background music even when I am watching a movie on Netflix, how do I turn this music off?

    My iMac plays background music when I am using Safari.  Right now, as I am typing this message, it is playing background music.  When I am watching a movie on Netflix, it plays background music which interferes with the movie.  How do I turn this off?

    So pause iTunes or whatever application you are using for background music, before starting the movie.

  • Watching streaming movies from NetFlix

    I tried to watch streaming movies from NETFLIX, but I get an error indicating that the MAC does not support NETFLIX real-time streaming movies, but MAC could support this in the future. Does anyone know when MAC might enable this?

    This has nothing to do with Apple enabling this. It's up to Netflix to make their service available to Mac OS X. You should contact Netflix with your question.
    -Doug

  • I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

  • Hi, All my music files have an exclamation mark on the left and when I tunes asks me to locate a window opens with I Tunes folders but I still cant see my music library . What can i do? Thanks

    Hi, All my music files have an exclamation mark on the left and when I tunes asks me to locate a window opens with I Tunes folders but I still cant see my music library . What can i do? Thanks

    The red exclamation mark indicates that itunes cannot find your files.
    Are the music files still on your harddrive. Look n Finder
    Username/Music/iTunes/iTunes Media
    If the files are there then keep the option key pressed and open iTunes. A dialog box will open asking you to choose your library. Select Choose and then navigate to the Music/iTunes Folder and click OK

  • Hello, i were updatin my ipad, and then when it wasnt finished i came to take out the wire, the thing that sits in the iPad and now i cant do anything, its totally frozen, what can i do?

    hello, i were updatin my ipad, and then when it wasnt finished i came to take out the wire, the thing that sits in the iPad and now i cant do anything, its totally frozen, what can i do?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My screen is frozen on apple screen I cant turn it off or anything what can i do?

    My iphone is frozen on the apple screen I cant power off or any thing what can I do

    Hey cindyf150,
    Thanks for the question. After reviewing your post, it sounds like the iPhone wont power on past the Apple logo. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
    iOS: Not responding or does not turn on
    Turn your iOS device off and on (restart) and reset
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can't watch any movies on Netflix or Amazon

    My Airport Extreme seems to be working well with my IPad, Iphones, and Kindle.  However, the signal to the BluRay Player and TV is weak.  When I try to play a movie on Netflix or Amazon, the screen shows I am receiving about 0.3 mbps.  The result is that the movie will hesitate for a few seconds and then play for a few seconds ec.  I have spent a lot time with Sony support on the Blu Ray player and it seems to be operating fine.  I am receiving 65 mbps download on Cox with an up of 29mbps.  I have checked the speed on several speed checkers. 
    When I go into the Airport Utility, I can see my devices and all are receiving about 58-65 mbps with the exception of the TV/BluRay player. The MAC address for the BluRay Player/TV shows it is receiving +/- 1 mbps.
    Any ideas on why my one device is not receiving the adequate download and what I should do?
    Thanks

    When I go into the Airport Utility, I can see my devices and all are receiving about 58-65 mbps with the exception of the TV/BluRay player. The MAC address for the BluRay Player/TV shows it is receiving +/- 1 mbps.
    Suggest that you locate your laptop as close as possible to the location of the BluRay player and take a reading to see how the signal looks on the laptop.
    If the laptop is getting 50-65 Mpbs, then you know the BluRay player is as well. You will need to have the wireless checked out on the BluRay player...as it would appear that the AirPort Extreme is operating normally.
    If at all possible, a wired Ethernet connection is always recommended for any type of video streaming, especially high definition video.

  • Cant watch purchased movies on iphone 5

    I turn off wifi on iphone 5 and cant watch my purchased movies. How do I get movies back on my phone?

    see eric1013Dec 29, 2013 9:14 PM  in response to thoots99
    Re: Bought a video - got the "cloud download" icon.
    eric says:
    See below from:  http://www.imore.com/movies-icloud-means
    Underneath the "Purchased" option there is a "Downloads option" - This should get the d/l going if it hasn't started already.  Note - for movies greater than 100mb in size a wifi connection is needed.
    To re-download movies you've previously purchased from iTunes on your iPhone, iPad, or iPod touch:
    Launch the iTunes app.
    Tap the Purchased tab at the bottom (if you don't see it, tap the More tab and then check there).
    Tap Movies from the selection list.
    Tap on the iCloud icon beside any of your previously purchased movies to re-download.

  • Why does my Apple TV 3 launch itunes songs every time I start watching a movie on netflix?

    I just set it up and have gone through all the available trouble shooting but every time I launch a movie in netflix, my laptop starts to play songs. how can I make it stop.   also, iTunes does not see AppleTV as a device and it doesn't show up on FInder either.  Is this normal?

    Diesel Vdub,
    thanks for the info - I will try the power the Router and ATV boxes, I can see why that may help since I did upgarde the ATV on the 2nd May (which is when these problems started) so I can say I beleive that the ATV is running the latest software. I'll let you know if rebooting both boxes helps.
    Phill

  • Aptv 3  dhcp error with Netflix, what can i do?

    my aptv 3 don't work with Netflix movies, because show error DHCP message, what can i do?

    It can be caused by:
    1. Slow internet; minimum speed must be at least 1.5Mbps
    2. Busy Netflix server
    Test your Internet speed with this:
    http://itunes.apple.com/sg/app/speedtest.net-mobile-speed/id300704847?mt=8&ls=1

  • When i plugged my ipod into the computer it reset with the new update and all my music on the ipod disappeared but the library showed my playlists still. Now its showing it as currupt and i cant even bring itunes up. What can I do? HELP please

    What can I do to fix this. I cant bring anything itunes related up without that popup telling me it is currupt, and that I have redue it. Everytimg i have tried, it does the same thing. It was working once so I dont understand what went wrong and where. This is the 5th time redoing itunes, I've even tried restoring old versions. Nothing seems to be working.

    If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. This makes 1 look and act more like previous versions. Also go to iTunes>Help>iTunes Help>Sync your iPod>Sync your device>Set up syncing>Sync device manually.
    to make sure you are follwoing the right instructions for drag and dropping.
    If the songs do not play in iTunes on the computer then y willhave to reimport them into iTunes. For iTunes purchases you can
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • After watching a movie from tunes i can not watch a second one without restart apple tv

    After I have watched a movie played via Itunes on my computer I have to restart the Aplle tv because the second movie would not load. Spinning wheel!

    Hello Amy,
    You can but the method varies depending on the Apple TV that you have.
    From the article How to rent a movie from the iTunes Store on your computer found here http://support.apple.com/kb/ht1390:
    To rent movies from the iTunes Store on your computer
    In iTunes on your computer, click iTunes Store.
    In the iTunes Store, find a movie you want to rent.
    Click Rent. Your rental should begin to download immediately.
    Once the rental is downloaded, you can watch it on your computer or transfer the rental to a supported iPod, iPhone, iPad, or Apple TV (1st generation):
    Connect the device and select it in iTunes.
    Click the Movies button.
    Select the movie, and then click Move.
    After all movies have been moved, click Apply in the lower-right corner of iTunes.
    You must be connected to the Internet to transfer a rented movie.
    If you have Apple TV 2nd gen. or later you can use Airplay to play it on your tv through the Apple TV.
    Here is the article to help get that setup and going.
    Using AirPlay
    http://support.apple.com/kb/ht4437
    Cheers,
    Sterling

Maybe you are looking for

  • New External Monitor for Logic on MacBook Pro - Suggestions

    I'm in the painful process of updating my studio and now my large screen external monitor has started failing. I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an ap

  • Problems while trying to read

    Hi, I am trying to read the "Received" headers for an email that is coming into my inbox. The headers are long and hence getting "folded". For example an email has these 2 headers [besides others]: Received: by 10.54.23.20 with SMTP id 20cs33514wrw;

  • Not able to create Schedule Task in OIM 9.1.0.2

    Hi, I created one Java program and created Jar file. Then placed in Schduled Task folder. When I try to create one Schedule Task in OIM web console, I am not able to see the Class File name in the list. Please let me know what could be the reason for

  • Need help in changing the way plumtree renders an html output

    We are in the process of customizing Plumtree rendering on Plumtree 5. As per my understanding, plumtree 5 renders every portlet as two different tables (One html table tag each for Portlet Header and for Portlet Body). I need to add few custom attri

  • How to use ANYDATASET from jdbc (11g)

    Hi, the jdbc dev. guide for 11g doesn't even mention the word ANYDATASET. However this data type is listed within the set of 11g jdbc new features. I will much appreciate any example about using it, e.i. assuming a schema defines a type containing a