I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Similar Messages

Updateable Report/Pagination - rows found but not displayed

Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
If I use "Row Ranges X to Y (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (with pagination) I have problems.
Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
Do you know what is causing this problem?

I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
I am using HTMLDB 2.0.

Format Trigger - do not display frame if multiple FIELDs are 0

Hello,
I am having trouble creating a format trigger to NOT display a frame if a multiple fields within the frame are 0.0
The field is named F_number1, F_number2, F_number3
The frame is called M_numberframe
All 3 of the fields listed have to be 0.0 in order to not display the frame. If only one is 0 then they still all three need to show.
Thanks!

Hello
The field is named F_number1, F_number2, F_number3These are actually field name's. You will have to write the source name in the format trigger.
Let say F_NUMBER1 is having souce as my_field1, F_NUMBER2 = my_field2, F_NUMBER3 = my_field3 then
Go to the frame's PL/SQL Editor by selecting and pressing F11 and write the as below...
IF :my_field1=0 AND :my_field2=0 AND :my_field3=0 THEN
RETURN FALSE;
ELSE
RETURN TRUE;
END IF;-Ammad

Spouse, Children fields from Outlook - syncing, but not displayed

I discovered something rather curious, and am wondering if anyone has any more information about this.
I use the Children and Spouse fields in my Outlook records. When I sync to iPhone, these fields are not shown. However, if I choose to "share a contact", it sends a vCard, which does include these fields! So the iPhone is clearly copying it over, but not displaying it? What's the point of that? I can understand a reluctance to make some fields uneditable, but storing them without displaying them?
Also of note: the vCard does not include the Anniversary field, even though it does sync this and includes other fields in the vCard like Birthday. That looks like a bug to me. Anyone care to confirm?
Thanks,
Keith

Hi,
It depends what you require...suppose in the multiprovider you want the filed from the ODS then you should select the fiel from the ODS but if you want the filed to get the value from the navigational attribute then you should go fro the navigation attribute in the options.
Navigation attribute will show up in the left if you have made them navigation in the cube as well.
identification gives you an option to map the the multiprovoder fileds with the fields of the underlying infoproviders.....if you go for create recoomendations then it will chose the optimal mapping that is one to one mapping.....A to A etc...but in certain case you want A to map to B such as in sone cases shipt-to-party can take data from sold-to-party....depends upon the requirement.
The options in the left gives you the char which will show up in the query and by selecting the char from the right from different inforproviders you actually defeine which filed from the infoproviders it should take data from.
So just make sure that all the fields in the right which are going to show up in the query should get have the identiication from the different infoproviders and there respective char....a navigation mapped to a navigation....and a direct char to a direct char from the infoprovider.
Hope it explains.
Thanks

HP P1102w don't print - W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.

Sirs,
I'm trying to print from wirelessy from my MacBook Pro (OS X Mountain Lion) to a P1102w printer without success.
The error message is:
W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.
The Printer Firmware is 20120130 (HP last version)
Any hints?
Regards
Camilo

It doesn't share the printer and the Mac can't print

IPad will open but not display information entered on a form sent as a PDF.

iPad will open but not display information entered on a PDF file. Same file will open and display all information on my iMac. Anyone had this problem?

I think that you are trying to view a form fields PDF file and you cannot see the content that was filled in on those fields. Form fields will not show in the mail app or in iBooks. Download Adobe Reader for the iPad. It is free and it offers a lot of features for a free app. Save that PDF to Adobe Reader and see if the text in the fields appear.

HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

They are not text messages, they are iMessages.
Turn on iMessage on the iPhone.

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
Post relates to: HP TouchPad (WiFi)

@MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

LP 9 NOT DISPLAYING EQ or INSERTS ON OUTPUT CHANNEL STRIPS

This is odd: Logic is not displaying EQ or Inserts on some of the Stereo Output Channel Strips. Instead of "Output 1 - 2" I have a "Master Output" with no EQ or Inserts. When I check the other stereo output strips I find that only one (output 7-8) is displaying properly. How can I fix this?
Thanks!

The output is turned on, yes. This is a session I did in Logic Pro 7 and opened in LP9. Again, as I said, OUTPUT 3-4, 5-6 also do not show up properly. Only Output 7-8 shows up w/EQ and Inserts showing.
I've opened several other LP7 sessions in LP9 and not had this problem. LP9 refuses to see the output (1-2) correctly.
When I turn off "Master" in the mixer window (upper right corner buttons), nothing changes. When I turn off "Outputs", the Master disappears.

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

VALUE CREATED, but not DISPLAYED IN QUERY

Hi dear all,
I have created a value under InfoObject A by going to RSA1.
Now while creating a Query, i have to use this value.
But this created value is not seen under that Navigational attribute,
B__A
What shud i do???
Need Help..
Thanks,
Sowrabh

When you right click on the Charachteristic and say restrict. You are not able to find the new value. Is this your issue??? try the folloiwng.
In 3.5
Right Click on the Characteristic and say restrict and go to fixed values.
At the Bottom you can see a Display Other Valu Option(Yellow-green Colour Arrow)
Click on that. this opens a new window.
In this Window uncheck the Only Values From infoprovider
Also uncheck the Authorized Values Only Checkbox
Also Set the Number of Displayed Values to All
Now Click OK. This will show you all the values for that particular Characteristic.
In 7.0
When u restrict a Charachteristic, u will see an option called Setting which is on top
When u click on that it will open a new Window . In that window, select value restrictions.
in that select the Radio Button All values And Read Mode Setting as Values in Master data.
Thsi will give you all the values

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

ICloud status not displayed correctly after changing tags

Hi everybody,
I have just below 25 000 songs in the iTunes library that I use for iTunes Match (my complete library is actually much larger but I created a separate library to stay below the 25 000 songs limit).
After changing some tags in iTunes (I had some artists listed twice, once in the format "<last name>, <first name>" and once "<first name> <last name>" and wanted to harmonize this) the iCloud status of most of my songs is no longer displayed correctly. If I create a smart playlist containing all "matched" songs it finds only about 1000 songs, a playlist for "uploaded" songs contains only about 250 songs, the vast majority of my songs simply have NO iCloud status whatsoever (not even "waiting").
Trying to fix this, I selected all of my songs, option clicked and chose "Add it iCloud". After waiting some time, nothing changed. The funny thing is: iTunes match reports that 24 669 songs (the correct number) are available in iCloud.
So basically everything works and I am also able to download all of my songs on my iPhone. Still, it's a little bit annoying that the iCloud status is not displayed correctly and smart playlists filtering for iCloud status don't work. Does anybody know a way to fix this?
Thanks for any help,
Andreas

The reason why the C3850 switch stack is showing as standalone in LMS CiscoView is because
it's returning sysObjectID as standalone.
It should return as 1.3.6.1.4.1.9.1.1745 --cat38xxstack
While, if you poll it for sysObjectID, the Catalyst 3850 stack switches will be returning OID 1.3.6.1.4.1.9.1.1641.
This is an IOS bug "CSCul00003 - Incorrect Sys OID for Cat3850 Stack device".
Unless this bug is fixed, LMS will not be able to show it as stack device.
You can try to check if you can manually change the device identity to cat38xxstack from Inventory > add/edit device > edit identity.
Else we need to wait for the fix of this bug.
-Thanks
Vinod

Gradient fill not displayed correctly after applying a rotation angle

Hello,
I've created a rectangleframe and applied a gradient fill, and afterwards I have applied a rotation of -90 to the gradient fill. After the rotation the gradient does not display correctly anymore (after saving the document to .idml I've noticed that the property GradientFillLength was not recalculated after rotation). Is there a command to force the update or am I missing something? This problem occurs in InDesign CS3/CS4.
Thank you
UIDList targetList(m_SplineUIDRef);
InterfacePtr<ICommand> applyCmd(Utils<IGraphicAttributeUtils>()->CreateFillRenderingCommand(
gradientUid, &targetList, kTrue, kTrue));
CmdUtils::ProcessCommand(applyCmd);
InterfacePtr<ICommand> angleCmd(Utils<IGraphicAttributeUtils>()->CreateGradientFillAngleCommand(
gradientAngle, &targetList, kTrue, kTrue));
CmdUtils::ProcessCommand(angleCmd);

Thanks. I saw those threads but this is not that issue. I really think that this is a bug in the latest update for illustrator.

Dynamically created "alt" attribute not displaying

Hi, I have created a details page for our company product, which is diplayed dynamically. I have on this page a dynamic image as well thats pulled from my database. As with any image on the web, I want to set the alt attribute, but of course this has to be dynamic as well. I have done this it seems, as I view my source code from a browser, I can see that the alt has a value there and that it is the correct value. My question is, why doesnt this display when I mouse over the image? Is there something I am forgetting to add? Is this attribute deprecated? here is my code for the alt cfoutput:
function(){return A.apply(null,[this].concat($A(arguments)))}
<cfoutput>
          <table align="center">
            <tr>
              <td><cfif rsDetails.image1 NEQ "">
                  <a href="images/#rsDetails.image1#" target="_blank"><img src="images/#rsDetails.image1#" alt="#rsDetails.item#" /></a>
                </cfif></td>
            </tr>
          </table>
        </cfoutput>
Here is the source code from the browser that shows there is an alt value:
function(){return A.apply(null,[this].concat($A(arguments)))}
<table align="center">
    <tr>
       <td>
         <a href="images/60K19DL.jpg" target="_blank"><img src="images/60K19DL.jpg" alt="60K19/DL" /></a>
       </td>
    </tr>
</table>
I hope this is easy to understand without going into lengthy detail. Thanks for any help!

Ok I understand what you're saying now. lol I did try my code without the <a> tag but still didn't work. SO thats kinda weird.
However, until you pointed it out, I didn't realize his site didn't have the mouse tips in firefox or that other browsers didn't support it, so I guess its not that important after all...the tips I mean.
I hate IE too! but unfortunately when dealing with an online wholesale site, I must use and develop for IE.
Anyway, thanks for the help! I may try the title attribute, but I think as long as I have the alt for SEO then I am fine.

I create trigger but not display massage after insert in oracle 10g

Similar Messages

Maybe you are looking for