I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees

I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees?

Rick
Have you looked at Delete and Close Gap as well as Delete for what you describe?
Nonetheless, adding or moving clips to an existing Timeline content without disturbing the existing Timeline content can be challenging and complex under certain scenarios.
Typical solutions include making these moves with a keyboard modified held down (Windows Alt or Ctr). I am strictly an Elements Windows user, so we will need to find the Mac counterparts for the Windows keyboard modifier techniques.
Also, if one move triggers a multi-chain disaster, then you should consider grouping block of clips so that they do not move while you are busy with your Timeline maneuvers. Check out the Clip Menu options for Group and Ungroup.
Some times in the "Mac condition", you need to use fn in addition to the command to achieve some of these Windows counterparts.
The following video tutorial on arranging clips and keyboard modifiers is being posted for informational non promotional reasons.
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It is demo'd with Premiere Elements 8, but the principles are the same for later versions of the program.
Here is one variation of the issue on Windows.
ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
You should not have to delete audio to prevent it from being split by an addition to an existing Timeline. The keyboard modifiers should help you resolve this type of issue.
Please review and consider.
Thanks.
ATR

Similar Messages

After creating a slideshow in iDVD and burning it to a blank DVD-R disk, can I later add another slideshow?

After creating a slideshow with my photos in iDVD and burning it to a bland DVD-R disk, can I used the unused space on the disk to add another slideshow at a later date?

Thanks!

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

Hello jive
I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
regards gins51

How do I create a wide screen movie in Premiere Elements 7 and burn to DVD or Blue Ray?

I have created a movie using project settings of 16:9 and also filmed in this format. The movie I burned to DVD is not in wide screen. I have requested assistance and given instructions to go through share and select Sony PSP. However this creates a file which is saved to my computer in mpeg-4 format which will not burn to my DVD. I am using a Blue Ray burner which looks as if it will only take MP3. Any suggestions?

I haven't actually done a BluRay yet - waiting to get everything right and,
hopefully, will be able to put more than 1 movie when all is finished!
That's my next challenge. I initially used Share/Disc to burn the DVD with,
I thought, all the settings for widescreen. It has always worked OK in
Pinnacle. When I lodged the problem with tech support they sent me
instructions using the Sony PSP. Interestingly I use a Sony camera, have a
Sony disc burner plus Sony TV and Playstation so you'd think they'd all talk
to each other!!!
Take Care
Jill in Launceston
http://www.jilldearing.blogspot.com/
Are your creating and burning your DVD (or is it a BluRay disc?) from
Premiere Elements by choosing Share/Disc?
If so, it should produce a widescreen disc.
Sometimes DVD players don't automatically read home-burned DVDs as
widescreen and you have to manually switch it. But at the very least the
video should be either letterboxed or stretched.

I have created a slideshow in iPhoto and then used iDVD to burn the sideshow to a DVD. The quality of the DVD is poor. Any ideas?

I have created a slideshow in iPhoto and then burnt it to DVD using iDVD. The quality of the slideshow on the DVD is poor. Any ideas?

Poor in what way? iDVD creates standard definition displays of 640 x 480 pixels and will not look as sharp as the orignal photos in the iPhoto slideshow on a Mac monitor.
OT

How can I make a slideshow with music and burn it to a disk?

I need to make a photo slideshow with music and burn it to a disk. I am able to make the slideshow but I cant figure out how to save it or burn it to a disk.

How do you want to play the slideshow? On another computer or on a TV set?
If it's the former export the slideshow as a QT movie file to the desktop and burn that file to a disk with the Finder.
If you want to create a video DVD of the slideshow so that it can be viewed on a TV set, use the Share ➙ iDVD menu option. That will export the slideshow into iDVD where you can complete the menu and project design.
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process. To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I am trying to create a slideshow in Elements 10

I am tring to create a slideshow in Elements 10 Organiser, however the is no "slideshow" tab to select in the create options list, can anybody help please?

Hi Domnic and Barbara, thank you so much for your help and replies. Yes, I'm using a Mac which is obviously my problem.
Thank you both so much for your assistance, have a great day, Cheers, Ray

How can i burn a dvd of a slideshow created in iPhoto, how can i burn a dvd of a slideshow created in iPhoto

how can i burn a dvd of a slideshow created in iPhoto, how can i burn a dvd of a slideshow created in iPhoto. will not burn

Do you mean a slideshow in iPhoto '11 on your Mac?
And do you want to create a video DVD to play in a DVD player? This cannot be done completely in iPhoto, see this User Tip:
How to create a video-DVD? (Macs without iDVD): Apple Support Communities
and also Old Toad's post here:
Re: iPhotos to dvd...best way to burn them?
Regards
Léonie

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. Help!

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!

You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts.

Procedure for creating transparent table, data element and domain

Hi,
Can anybody let me know the procedure for creating transparent table, data element and domain.
Thanks,
Mahathi

Hi
Database table and its components
A database table is the central data structure of the ABAP/4 data dictionary.
The structure of the objects of application development are mapped in tables on the underlying relational database.
The attributes of these objects correspond to fields of the table.
A table consists of columns (fields) and rows (entries). It has a name and different attributes, such as delivery class and maintenance authorization.
A field has a unique name and attributes; for example it can be a key field.
A table has one or more key fields, called the primary key.
The values of these key fields uniquely identify a table entry.
You must specify a reference table for fields containing a currency (data type CURR) or quantity (data type QUAN). It must contain a field (reference field) with the format for currency keys (data type CUKY) or the format for units (data type UNIT). The field is only assigned to the reference field at program runtime.
The basic objects for defining data in the ABAP Dictionary are tables, data elements and domains. The domain is used for the technical definition of a table field (for example field type and length) and the data element is used for the semantic definition (for example short description).
A domain describes the value range of a field. It is defined by its data type and length. The value range can be limited by specifying fixed values.
A data element describes the meaning of a domain in a certain business context. It contains primarily the field help (F1 documentation) and the field labels in the screen.
A field is not an independent object. It is table-dependent and can only be maintained within a table.
You can enter the data type and number of places directly for a field. No data element is required in this case. Instead the data type and number of places is defined by specifying a direct type.
The data type attributes of a data element can also be defined by specifying a built-in type, where the data type and number of places is entered directly.
Two Level Domain Example
A domain defines a field technically and therefore it may
be used at different business levels.
A data element describes the meaning of a domain in a certain business context.
A domain, however, is used for the technical definition of a table field (for example field type and length).
Therefore, although a take-off airport (data element S_FROMAIRP) would have a different business meaning from an airport where a plane lands (data element S_TOAIRP), they could still have the same domain(here S_AIRPID) because technically we could assign the same number of characters whether the airport is a take-off or a landing airport.
Definitions of Table in Database
In SAP R/3 tables are defined as
A) Transparent tables: All of the fields of a dictionary table correspond to a field in the real database table.
B) Pooled tables: Different tables which are not linked to each other with a common key are combined into a TABLE POOL. Several logical tables thus exist as a single real database table.
C) Cluster tables: Several tables linked by a common key may sometimes be combined by the data dictionary and made to exist on the database schema as a single table.
SAP is evolving R/3 tables in transparent tables.
Elaboration on each of the definitions
A transparent table is automatically created on the database when it is activated in the ABAP Dictionary. At this time the database-independent description of the table in the ABAP Dictionary is translated into the language of the database system used.
The database table has the same name as the table in the ABAP Dictionary. The fields also have the same name in both the database and the ABAP Dictionary. The data types in the ABAP Dictionary are converted to the corresponding data types of the database system.
The order of the fields in the ABAP Dictionary can differ from the order of the fields on the database. This permits you to insert new fields without having to convert the table. When a new field is added, the adjustment is made by changing the database catalog (ALTER TABLE). The new field is added to the database table, whatever the position of the new field in the ABAP Dictionary.
Tables can also reside on the database as Pooled tables or cluster tables
Pooled Tables: Different tables which are not linked to each other with a common key can be combined into a Table Pool. The tables contained within this pool are called Pooled Tables. A table pool is stored in the database a simple table. The table's data sets contain, in separate fields, the actual key for the data set to be stored, the name of the pooled table and the contents of the data set to be stored.
Using this schema, several logical tables are combined into a single real database table. Although the data structure of each set is lost during the write to the table pool, it is restored during the read by the ABAP/4 Data Dictionary. The ABAP/4 Data Dictionary utilizes its meta-data to accomplish this.
Since information must be prepared (defined) within the ABAP/4 Data Dictionary when it is read or written to (or accessed), this process itself defines these as not transparent tables
Cluster Tables: Occasionally, several tables may be linked by a common key. The ABAP/4 Data Dictionary can also combine these tables into a single table. Each data set of the real table within the database contains a key and in a single data field, several data sets of the subsequent table for this key.
As mentioned above, these table types require special data handling, therefore they are not transparent tables.
Technical Settings in Dictionary
The data class logically defines the physical area of the database (for ORACLE the table space) in which your table should be created. If you choose the data class correctly, the table will automatically be created in the appropriate area on the database when it is activated in the ABAP Dictionary.
The most important data classes are master data, transaction data, organizational data and system data.
Master data is data that is rarely modified. An example of master data is the data of an address file, for example the name, address and telephone number.
Transaction data is data that is frequently modified. An example is the material stock of a warehouse, which can change after each purchase order.
Organizational data is data that is defined during customizing when the system is installed and that is rarely modified thereafter. The country keys are an example.
System data is data that the R/3 System itself needs. The program sources are an example.
Further data classes, called customer data classes (USER, USER1), are provided for customers. These should be used for customer developments. Special storage areas must be allocated in the database.
The size category describes the expected storage requirements for the table on the database.
An initial extent is reserved when a table is created on the database. The size of the initial extent is identical for all size categories. If the table needs more space for data at a later time, extents are added. These additional extents have a fixed size that is determined by the size category specified in the ABAP Dictionary.
You can choose a size category from 0 to 4. A fixed extent size, which depends on the database system used, is assigned to each category.
Correctly assigning a size category therefore ensures that you do not create a large number of small extents. It also prevents storage space from being wasted when creating extents that are too large.
Modifications to the entries of a table can be recorded and stored using logging.
To activate logging, the corresponding field must be selected in the technical settings. Logging, however, only will take place if the R/3 System was started with a profile containing parameter 'rec/client'. Only selecting the flag in the ABAP Dictionary is not sufficient to trigger logging.
Parameter 'rec/client' can have the following settings:
rec/client = ALL All clients should be logged.
rec/client = 000[...] Only the specified clients should be logged.
rec/client = OFF Logging is not enabled on this system.
The data modifications are logged independently of the update. The logs can be displayed with the Transaction Table History (SCU3).
Logging creates a 'bottleneck' in the system:
Additional write access for each modification to tables being logged.
This can result in lock situations although the users are accessing different application tables!
Create transparent table
Go to transaction SE11. Enter name of table you want to create (beginning with Y or Z) and click on create pushbutton
Enter the delivery class and the table maintenance criteria
The delivery class controls the transport of table data when installing or upgrading, in a client copy and when transporting between customer systems .
The display/maintenance indicator specifies whether it is possible to display/maintain a table/view using the maintenance tools Data Browser (transaction SE16) and table view maintenance (transactions SM30 and SM31).
Enter the name of the table field and the data element. The
System automatically populates the technical details for
existing data elements.
So far as possible it is advisable to use existing data elements which befit the business requirements.
However, we may create data elements if need be. The same is shown in the next slide.
To create a data element simply double click on it.
Alternately create a data element by simply choosing the
data type radio button on SE11 initial screen.
Create data element
The system prompts you to create a new data element.
Choose the Yes pushbutton.
Under the data type tab enter the domain name which
determines the technical characteristics of the field.
Further characteristics tab: Allows you to specify a search help assigned to the data element.
It also allows you to specify a parameter id which helps you populate a field from SAP memory.
Field label: Can be assigned as prefixed text to a screen field referring to the ABAP Dictionary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
Create domain
If the domain does not exist in the data dictionary the
system prompts you to create one.
Give the technical characteristics under the definition
tab. Value range allows you value restriction at domain
level.
Value range tab:
As explained in the section Consistency through input checks one can restrict the possible values for a field at domain level itself by either entering fixed values or by specifying a value table under the tab Value range.
Currency/Quantity fields in a table
A currency or a quantity field must be assigned a reference field from a reference table containing applicable qty unit or currency unit.
Field of the reference table, containing the applicable quantity unit or currency
A field containing currency amounts (data type CURR) must be assigned a reference field including the currency key (data type CUKY).
A field containing quantity specifications (data type QUAN) must be assigned a reference field including the associated quantity unit (data type UNIT).
Create transparent table continue
Maintain the technical settings of the table by clicking on the tab

How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC. In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:". I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive. I disabled the virtual CD and rebooted. This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn. I tried the burn again and the DVD burner was no longer recognized.
I then removed PE13 and reinstalled it - no errors during the install. Tried again and same result - no DLLs.
Any help would be greatly appreciated.
Thanks for your time,
Mark

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

Can't burn a DVD on Premiere Elements 12

At 98% media encoding the DVD is spit out and I get the following: internal software error:/premiere/elements/molecules/pre-mediacore/External/AuthorScript/Source
Any suggestions? I need the video for a class this week!

ATR,
Thank you for the reply and suggestions. I did some more researching and found a suggestion to remove the stop marker at the end of my video....and it worked! Apparently the stop marker causes an internal error. Mystery solved.
Thank you again for the ideas. I'm going to keep them on file for the next burn hic-up.
ibed
Date: Sat, 11 Jan 2014 22:12:58 -0800
From: [email protected]
To: [email protected]
Subject: Can't burn a DVD on Premiere Elements 12
    Re: Can't burn a DVD on Premiere Elements 12
    created by A.T. Romano in Premiere Elements - View the full discussion
ibed
What computer operating system is your Premiere Elements 12 running on?
Is this an external or internal burner?
Would you say that this is a case of "it worked before but not now" or "it never worked before"?
Although you cannot burn to disc DVD, can you burn your Timeline to folder. If so, the VIDEO_TS Folder from the burn to folder + ImgBurn to get your DVD-VIDEO on DVD disc may be your answer to this time crunch.
Let us start here and then decide what next depending on your answers.
Next step may be getting more information about your project settings and properties of your source media.
Could you post a screenshot of the error message that you are getting?
More details in the morning when we will be watch for your follow up.
Thanks.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6004504#6004504
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6004504#6004504
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6004504#6004504. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

LRP
Thanks for the follow up.
In Premiere Elements 13/13.1, your export choices are in the Publish+Share section of the project. There are several choices and sub-choices.
Example: Publish+Share/Computer/and then a list of choices under that, such as, MPEG, AVI, AVCHD, XAVC-S, Windows Media, QuickTime, Image, Audio.
And each has Presets which define the export settings. Adobe offers default settings which are usually optimized ones. But, it also allows you to customize the preset selected. You do that by clicking on the Advanced Button of the selected preset and customizing the settings under the Video Tab, Audio Tab, and, if applicable, Multiplexer Tab.
From what you wrote, I thought that you might be asking about exporting a video with a video codec = Photo JPEG.
To do that you would to to
Publish+Share
Computer
QuickTime
with Presets = either the one for 4:3 of 16:9 as appropriate for your project,
and then clicking on the Advanced Button, and then the Video Tab under the Advanced Button.
Then selecting Photo JPEG for the video codec field.
Tip: The QuickTime choice is not seen unless you scroll down the list of Computer choices. Use the thin scroll bar to the right of the Computer choices.
Please explore Premiere Elements 13/13.1's Publish+Share/Disc/DVD with standard or widescreen preset for your creation of the DVD-VIDEO on DVD disc.
The Premiere Elements timeline destined for this choice could consistent of supported photos and or videos.
Please consider.
Any questions and need clarification, please do not hesitate to ask.
ATR

When I try to burn a DVD in Premiere Elements 12 I get an Internal software error%0, line %

When I try to burn a DVD in Premiere Elements 12, I get an Internal software error %0, line %1. This is the first time that I have tried to use this program.

As suggested in the original reply in January, you will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Does Adobe Premier Elements 8 burn AVCHD DVDs in HDusing a standard burner? Does it need a bluray?

Does Adobe Premier Elements 8 burn AVCHD DVDs in HD using a standard burner or do you need to have a bluray burner? I have read comments stating you can't burn HD video straight to DVD. I need to check this out before I purchase it.
Thanks

Do not hesitate to ask. Adobe has always been a very good host, and allows for pretty open discussions on editing videos, regardless of what one is using.
Now, I have to admit that I have not seen Pinnacle Studio since the S-10 days. I had S-7, S-8, S-9 and S-10. S-9.4.3 was about the only one, that I really liked, but felt that it was a bit too much of a "big-button" solution, as were its predecessors and S-10. I moved to AVID Liquid, and did not like it. I found PrPro, and the rest, as they say, was history. I added PrE 4 to handle some consumer formats & CODEC's, that PrPro did not do well with.
I have done some Projects in PrE, mainly to keep me atop the questions in this forum.
I find that PrE, as of version 4, is more like Pinnacle, in that things are kept pretty much under the hood, and the big-button solutions abound. I am still much less comfortable with PrE, than with PrPro, though I did spend a bunch of time on Pinnacle Studio. Things just work better for me. I have to admit that I am a "control freak," and do not mind doing hand-work, if I can harness the full power.
I have not seen the more recent Pinnacle products, so cannot comment on them. Going back, my versions (except for 9.4.3) were very crash-prone, and seldom could complete a Project, without at least one catastrophic failure along the way. I learned early on to always hit Ctrl+S (Save), after almost everything I did. My PrE 4 has only crashed once, and that was OE on my part. Now, I do have a much more powerful laptop, than the computers that I used with most versions of Pinnacle, so it's probably not a really fair comparison. The Projects now, are much more involved, than in the Pinnacle days.
Doesn't directly address your question, and I'm not sure that many folk here have spent enough time with both NLE programs, to help. I would suggest that you post your question in the Muvipix Community (forum), as many users there have different programs, and experience in a bunch. While many use Adobe products, many others use different NLE programs. Maybe some know PrE and Studio (later editions, that what I know/knew) and can answer your question directly.
After Studio 10.5.1 update killed (and I really mean "killed") a brand new workstation, I swore that no version of Studio would ever find its way inside my edit suite. That was when I went to AVID, but soon dumped that. Though I had used many Adobe products for decades, I have no idea why I did not go to Premiere Pro earlier. My bad.
Good luck,
Hunt
PS - I also feel that most salespeople lick their lips, when they sell an AVCHD camera, as they know that the customer WILL be back for a much more powerful computer.

I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees

Similar Messages

Maybe you are looking for