I created a view but i am unable to select the colums

i created a view using a procedure
when i do
select * from v_view;
i am getting colums
but
i am when i am doing
select cola,colb,colc from v_view;
i am getting an error message
Error starting at line 1 in command:
select Tr_obj_no from V_GLFUNCT
Error at Command Line:1 Column:7
Error report:
SQL Error: ORA-00904: "TR_OBJ_NO": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
can any ine help on this
thanks

Hi,
Welcome to the forum...!
Can you show us a describe and the select in the same sessions..?
SQL> desc my_view;
Name                                      Null?    Type
DATE1                                              DATE
SQL> select date1 from my_view;
DATE1
15-OCT-09Please enclose your code in at the start and end to make it appear better.
Thanks,
Rajesh.

Similar Messages

Unable to select the value from a list item in forms 6i

Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
Deepthi

If you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony

I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.

I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.

AppleFAN7591 wrote:
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

I want to name individual photos in the album but I am unable to select view sort in the drop down menu How can I overcome this?

I want to name individual photos in the album but I am unable to select view>sort in the drop down menu How can I overcome this?

Great to hear, but what was the solution?

I posted a question in lightroom, but I am unable to join the discussion!

I posted a question in lightroom, but I am unable to join the discussion! I am logged in, but when I click on reply, nothing happens! All I can see is javascript(0)

Clem is telling you to click on the View menu, move the pointer down to the item "Metadata," & from its choices make sure "Show Titles" is selected. Do this, then make sure you are in a view in the main window that shows one or more videos (or whatever) that you want to title. Click once on one of them, & if the separate Info window is not open, open that (on the Windows menu or command + i as a keyboard shortcut). In the Info window the top line will be "Add a Title."
Click once on that & type your title.
This works for any item, video or photo.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.

Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini

I have adobe digital edition 2.0 and I am trying to authorize my erreader, but I am unable to find the 'manage library' before I open ADE.

I have adobe digital edition v2.0 and I am trying to authorize my erreader, but I am unable to find the 'manage library' before I open ADE. Where to I find the 'manage library'? and should I upgrade the ADE to version v1.7.2.?

To make Mail quit you'll need to perform a forced quit or, failing that, a forced shutdown.
When an application won't quit you can hold the Command and Option keys together and then type the ESC key. This (usually) brings up a dialog with all the running applications. Select the offending program and click the Force Quit button.
If this doesn't force the application to quit (quite rare) or if you cannot get the Force Quit Dialog to pop up, hold the power button for about 10 seconds to shut down the entire computer. This should be a last resort but sometimes is necessary.

I just recently downloaded the newest version of iTunes and am signed into my account, but I am unable to access the iTunes Store. Please help!

I just recently downloaded the newest version of iTunes and am signed into my iTunes account, but I am unable to access the iTunes Store. I didn't get an error message with a reason why I am unable to connect, I'm just not able to connect to the iTunes Store. Please help!

https://discussions.apple.com/message/22904334

I work with Blackboard and the website is being changed with my updates, but I am unable to see the changes.

I use Blackboard, which is a platform for online teaching. I make updates/changes to the site, but I am unable to see the changes. This only happens with Firefox. How do I enable updates?

Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

HT204291 I have downloaded latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

I have downloaded the latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

Can we assume you are bringing up the "Control Center" and the Airplay icon is not there?
http://www.apple.com/ios/whats-new/
Do you have the "AirDrop" icon?

I use a macbook pro. Several months ago I signed up for the Photoshop/lightroom offer and the payments are taken from my bank but I am unable to locate the product. I just get a message saying that my trial is expired. I am really desperate.

I use a macbook pro. Several months ago I signed up for the Photoshop/lightroom offer and the payments are taken from my bank but I am unable to locate the product. I just get a message saying that my trial is expired. I am really desperate.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I think it is 7.1.1 - there was another update today which I've uploaded but it didn't make any difference. It's just the music libary on the 5 that's causing me problems.

My firefox deleted the existing adobe flash player 10.3.183.7 BUT I'm unable to download the new flash drive 10.3.183.10. Can I go back to the old flash player (10.3.183.7)

I am running Windows XP.
my firefox deleted the existing adobe flash player 10.3.183.7 BUT I'm unable to download the new flash drive 10.3.183.10. Now I can't play anything. Can I go back to the old flash player (10.3.183.7)?''

There is something wrong with the download that Adobe is pointing too. You can get the working download here:
http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_10.exe
That solved my problem immediately.
I got this info from this post on the Adobe forum:
http://forums.adobe.com/message/3947097#3947097
Flash Download Problems
WindowsXP SP3
Mozilla/5.0 (Windows NT 5.1; rv:6.0.2) Gecko/20110902 SeaMonkey/2.3.3
(Note well: Internally, SeaMonkey 2.3.3 is the same as Firefox 6.0.2. They both use the same Gecko 6.0.2 for rendering Web pages, interfacing with the Internet, downloading, etc.) They differ only in the user interface (menus, buttons, etc).
I see two problems when trying to download a new version of Flash Player from http://get.adobe.com/flashplayer/. .
1. Your Web server is sniffing for my browser. I select the "Download now" button, and I get the same page all over again. The navigation is looping. If I spoof Firefox 6.0.2, however, I do get a download. This means you are sniffing for "Firefox" when you should be sniffing for "Gecko".
2. While spoofing Firefox, the download gives me install_flashplayer10_chrd_aih.exe, which is not the installer for Flash Player 10.3.183.10. Instead, it is some kind of helper. To get the correct installer file, I had to search my archives to find the URI http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win /install_flash_player_10.exe.
Both of these problems were previously cited in this forum at http://forums.adobe.com/message/3885371. Neither problem has been fixed.

I created a view but i am unable to select the colums

Similar Messages

Maybe you are looking for