I disabled SSL v3, now a POP3 connection is failing

I disabled SSL v3.0 to protect us from the Poodle vulnerability, now I find a vendor, providing a service deemed as critical, is unable to connect over POP3. It was working until Friday, when SSL v3.0 was disabled in the registry, since then the connection
has been failing. I have deleted the registry key I created to disable this, no change. Any ideas what I need to do to get this working again?
I am using Exchange 2013 on Server 2012 R2

Hi,
Disabling the use of SSL v3 on the client will prevent all clients to use SSL v3.0 to establish SSL channels, these will use TLS instead; the consequence of this is for services (applications servers) who don’t support TLS, who only rely
on SSL 3.0 for SSL encryption => clients/browsers without support of SSL v3.0 won’t be able to access services using SSL v3.0 only; they just won’t understand other SSL encryption protocols than SSL v3.0. For more information, please refer to:
Vulnerability in SSL 3.0 – Poodle attack and Exchange 2010 or Exchange 2013
Therefore, only if the application accessing uses only SSL 3.0 would be affected. Please contact your vendor which provide
a service deemed as critical to confirm if it has TLS enabled by default. Then you can change the POP3 connection to use TLS to have a try.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Apple Mail 8.2 disables SSL to POP3 server (Securityrisk)

Hi,
Setup
Computer:
OSX 10.10.2
Mail 8.2 (2070.6)
Mail server A
POP3 port 995 SSL
(Non SSL - port 110 - is disabled due to security reasons)
Mail server B
POP3 port 110
POP3 port 995 SSL
Summary
OSX Mail client removes SSL support on non regular intervals for POP3 connections. For the connections that support regular non SSL POP3 (port 110) this reduces the security, but the mail is available. This was noticed by me because one ISP has locked down their POP3 server to SSL only due to security reasons. After reenabling SSL on the connection (Mail -> Preferences -> Accounts -> Account in question -> Advanced) the connection remains with SSL support for a while, then it is removed again. As OS X Mail has no token to identify SSL or regular port 110 connection this is transparant to the user, unless the server does not support regular POP3, at which time a error is generated.
Comments
1) This seems to be a security related issue with mail where OS X mail downgrades from SSL connection to regular port 110 POP3 traffic
2) If corrected the connection is downgraded again within a couple of days, if not sooner.
3) Connections to POP3 servers supporting port 110 are "unaffected" with the exception of the security issue of a downgrade
4) Connections to POP3 servers that only support SSL - port 995 - are not able to complete until SSL has been reenabled manualy.
5) Downgrade bug has been seen only on my machine, so it might not be something mainstream. Machine is updated to latest patches.
Questions
1) As this has only been observed on my machine, has anybody else seen this POP3 SSL downgrade bug?

Same problem. The following information is from Symantec:
To disable SSL\TLS
Open Apple Mail.
Click the Mail menu and select Preferences.
Select your mail account on the left under Accounts, then click the Advanced tab.
Confirm the check box labeled "use SSL" is not checked next to ports. If necessary remove the checkmark.
Click the Account Information tab and select Edit Server list from the drop down next to Outgoing Mail Server.
Click the Advanced tab and confirm there is not a checkmark next to Use Secure Socket Layer(SSL).
Click OK and close the accounts. Window and choose to save.
Click Save to update your settings.
Restart Apple Mail.
This does work for a while but eventually Mail reverts to enabling Use SSL and disabling Allow Insecure Authentication but only one some of my addresses but not all. Some accounts POP logs-in but not SMTP.

HT1212 my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft

my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft copy of the ios on my windows pc. please how can i reload my ipad

Try using recovery mode
Recovery mode - Support - Apple

HT4061 My Ipad2 has a message Ipad disabled connect to itunes. The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with. What can I do? I cant even access the serial number to contact apple. Help!

My Ipad2 has a message: Ipad disabled connect to itunes. The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with. What can I do? I cant even access the serial number to contact apple. Help!

Call Apple anyway. If the device was ever registered with then they will have the serial # on file and can look you up by other info such as your name or phone number.
To re-enable an iPad any computer with iTunes should work. However, if your data was not backed up to iCloud you will not be able to access it until you get back to your home computer.

Have disabled IE on windows pc and am using Firefox as browser. iTunes now says cannot connect to internet even though Firefox working: suggestions

Have disabled IE on windows pc and am using Firefox as browser. iTunes now says cannot connect to internet even though Firefox working: suggestions?

There is a plugin for Firefox - see here
http://latestversionplugin.com/current-version-plugin-itunes-application-detecto r.html
It should be installed automatically if you install iTunes, but I guess when you installed iTunes you didn't have Firefox. Just reinstall iTunes and it should work OK (your iTunes library will not be affected)

HT4623 i reset my login two days ago, now I can't remember it and my Ipad is disable and I was told to connect to iTunes

I reset my login on my ipad two days ago, today I can't remember what I changed it too. My Ipad is disabled and I was told to connect to ITunes

1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

I copied my itunes library via an external hard drive. now when i connect my ipod to the new computer i can see my music but my apps are disabled

i copied my itunes library via an external hard drive. now when i connect
my ipod to the new computer i can see my music but my apps are disabled

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

How to disable SSL v3 for sun os 5.6 (OAS 4.0.8), I am facing POODLE vulnerability issue?

my Website is hosted on Sun OS 5.06 (OAS 4.0.8) and using web server : Oracle_Web_Listener/4.0.8. Website is configured to use https for secure pages and it was working fine from last 10 years but suddenly i am getting complaints from my customers that they can not browse site on chrome version 40 and above and firefox 34 and above.
I searched for this issue and found that there is POODLE attack which may causing this issue. now the only solution i can see is to disable SSL v3 on server.
Can any help me out with the process or an idea, How to disable SSL V3 on this Olde server? its sun microsystem server.

Hi Aamir,
   This is old software, been a while since I saw one of these.
    Normally when SSL was setup there were two listeners, one with SSL and one without, in a different port, so you could try to find this second port, which may work without any need to change the configuration.
    Else, try to check on the OAS manager (Usually on port 8888), the HTTP listener -> WWW -> Network, if there is a setup only for the SSL port, you will need to add a new line, with the same configuration, but a different port and the security disabled.
    Also, there may be some setting on the application itself for the url path. If so, when you navigate in the application it will try to redirect you back to the SSL port. In that case you will need to figure out where to change that, which depend on the application itself.
   Found this page on google with the process to setup SSL on OAS 4.0, you need to do the inverse of step 5.
WoSign Support: SSL Certificates Installation Instruction - Oracle Web Server (OAS 4.0.8)
Regards,
Luis

Help...downloaded new version of itunes...and now I cannot connect

I just downloaded new version of itunes and now I cannot connect to the itunes store...I get a message that says..."Itunes cannot connect to itunes store. the network connection timed out."
ran diagnostics here are the results... if anyone can help...
Microsoft Windows Vista Home Premium Edition (Build 6000)
Hewlett-Packard Presario F700 (GR967UA#ABA)
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.0.31
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D3C70EE5E29DDAC2
Current user is not an administrator.
The current local date and time is 2009-06-09 23:19:03.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce Go 6100
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {C07101F5-89CB-4921-9239-F59263AF4FAA}
Description: Broadcom 802.11b/g WLAN
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Jun 09 22:30:17 2009
Lease Expires: Wed Jun 10 22:30:17 2009
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {33E3719A-76B1-48B1-9F31-BD3CBF2DBDDA}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2009-06-08 09:41:24.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.1),
E: TSSTcorp CD/DVDW TS-L632M, Rev 0A17
Audio CD in drive.
Found 1 songs on CD, playing time 04:24 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
** iPod/iPhone Connectivity Tests **
iPodService 8.2.0.23 is currently running.
iTunesHelper 8.2.0.23 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
iPod nano (Second Generation) running firmware version 1.1.1
Serial Number: 7J651R7ZVQ5
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

Disable SSL 2.0 on Windows 2008 R2

Hi.
Can anyone give me a step by step on how to disable SSL 2.0 on IIS 7.5 please? I cannot find an article for it and those refering to IIS 7.0 do not seem to work.
Regards,
Morris
Best Regards, Morris Fury AFRIDATA.net

Morris -
Client-side SSL 2.0 is disabled by default on Windows 7 and Windows Server 2008 R2, which means that, when initiating an SSL connection from either of those two OSes that SSL 2.0 will not be sent as a supported protocol that the server can use. You can see
this in the following registry value:
Key: HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client
Value: DisabledByDefault
Server-side SSL 2.0 is not, however, disabled by default. This means that some other client, when initiating an SSL connection
to Windows Server 2008 R2 can include SSL 2.0 in the list of supported protocols. If SSL 2.0 is the only protocol in common between the client and the server, the server will select it.
Functionally, there is not much difference between setting Enabled to 0 and setting DisabledByDefault to 1.
Hope this helps,
Jonathan Stephens
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can
be beneficial to other community members reading the thread.

Disable SSL 3.0 in DSEE 7

Hello,
Is there a way to disable SSL 3.0 in DSEE 7, such that only TLS 1.0/1.1/1.2 can be used? I Googled for this and found MOS document 1950334.1, but the instructions in the document only apply to a DS proxy server.
Thanks,
Dave

Disabling SSLv3 by changing the encryption settings but it did not actually work. I loaded the LDIF and restarted the instance, and LDAP indicated that the change took effect:
root@ldap-test:/# ldapsearch -D "cn=Directory Manager" -w xxxxxxxx -b "cn=config" -s sub '(cn=encryption)'
version: 1
dn: cn=encryption,cn=config
objectClass: top
objectClass: nsEncryptionConfig
cn: encryption
nsSSLSessionTimeout: 0
nsSSLClientAuth: allowed
nsSSLServerAuth: cert
nsSSL2: off
nsKeyfile: alias/slapd-key3.db
nsCertfile: alias/slapd-cert8.db
nsSSL3Ciphers: all
nsSSL3: off
However, a test with openssl with the "-ssl3" option (forcing it to only use SSLv3) still connected:
$ /usr/local/openssl-1.0.1k/bin/openssl s_client -connect ldap-test.our-domain.edu:636 -ssl3
CONNECTED(00000003)
... <showed our server certificate, etc.> ...
If SSLv3 were actually disabled, that openssl test would have failed with an error. Disabling SSLv3 is required by our auditing tool because of the POODLE vulnerability, and a system cannot pass our audit unless SSLv2 and SSLv3 are disabled completely, but TLS 1.0/1.1/1.2 are still available.

RDS 2012 issues after disabling SSL 3.0

Hi all, we have Server 2012 R2 RDS infrastructure. I have 2 servers running RD web, gateway, and conn broker using Windows network load balancing. 3 RDSH servers behind them handling user workload.
Last night I disabled SSL 3.0 on both of these servers using the registry key 'Enabled' set to zero in HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server. Servers were rebooted after this change.
I did not disable SSL 3.0 on the RDSH servers yet, but I don't think it matters in this situation because the SSL traffic only passes between the remote computer and the RDGW server, AFAIK.
Today all the remote users were having issues with remote desktop sessions disconnecting them, but they would reconnect after a short time. They all told me this is unusual, normally the connections are quite stable. After I turned SSL 3.0 back on and rebooted,
no more issues, users are happy. Has anyone else experienced this? Is there anything that can be done to stabilize connections while SSL 3.0 is disabled?

Hi,
Thank you for posting in Windows Server Forum.
Did they receive any precise error when SSL3 is disabled?
What’s your client OS and RDP version using for your network?
If you would like to continue with SSL3 disabled you may try to change the RDP Security Layer under Security Layer.
When you are using RD Security Layer you are susceptible to MITM attack because there is no Server Authentication. I suggest you re-enable TLS 1.0 and have a ssl certificate from a public authority set on your RDP-Tcp listener.
You can also refer this article for other information.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

ILOM, how to disable SSL v2?

Hello
Is there any possibility to disable SSL v2?
I want to use HTTPS to connect to the server (Java Console) but it have to use SSL v3 only. Once trying to connect with v2 of SSL connection should not be established.
Is there any possibility to do this?
SP Firmware Version is: 3.0.3.20.e
SP Filesystem Version 0.1.22
Edited by: Luceks on Sep 2, 2009 4:28 AM

Hi.
You should have a SSL section under:
1) Log in to the ILOM-SP WEB interface.
2) Click --> Management --> SSL (or similar...)
3)
The SSL page appears. There're some sections to the SSL page.
One section includes targets and properties and you can configure the SSL settings displayed
in this section page (example):
**SSL**
State = Enabled | Disabled
Roles = Administrator | Operator | Advanced | (none)
Address = 0.0.0.0
Port = 0
4) Save settings page, to save any changes made to this section.
s.

Disable SSL v2 and weak cipers on a RV325 for PCI compliance

How do you disable SSL v2 and weak cipers on a RV325 to become PCI compliant?

Hello
per Cisco RVS4000 product site information this router is already end of life since January 30, 2010. Last date of support is also already missed - April 30, 2013. This means that according Cisco policy no further updates to existing firmware will be done - neither security-related fixes. And I am afraid that this is fact with which you have to deal.
regarding RV320 - it seems that there is no any possibility to restrict SSL/TLS protocol/version by your own in current version. Francis - I would recommend you to open service request to Cisco SMB Support if you still have valid support contract. I hope there is good chance to get it fixed as this security related inability.
lastly - for all products (including RVS4000) - I would suggest to keep management interface of router separated most as possible - i.e. restrict access to management interface only to single subnet/host(s) only (via Firewall feature). With having administration/management subnet and certain client(s) which is a part of this subnet can help to avoid eavesdropping your connection to router. Of course disabling remote management is the best thing you can do in any case (including avoid of possible firmware bugs, loggin attempts and so on).

Disabling SSL open domain server. How?

Hi all,
Can anybody elicidate to me how I can disable the SLL on a Open Domain OSX server?
In
http://support.apple.com/kb/HT5300
it is explained that you have to disable SSL prior to updating OSX from Mountain Lion with OSX server 2.2 to OSX MAvericks with server 3.
Any help is highly appreciated. Thanks already

Hi UptimeJeff,
Thanks for the reply.
I have rolled back three times from Mavericks to Mountain Lion server and will now stay there for some month until the quirks are ironed out. Mavericks OSX server is just to cumbersome right now.
So no email log to check at the moment.
But the email archives were not too big and the server had a full good night to do that.
The problem was strictly that server 3 app does not open after download and install and therefore does not let me finish configuration of the server.
Thanks anyway.

I disabled SSL v3, now a POP3 connection is failing

Similar Messages

Maybe you are looking for