I don't care if you think i did something stupid just help me.

So here is what happened. A while ago i accidentaley left my ipod out in a full downpour. It survived but it started doing weird things like when i tried to watch a video it would enter the video thing and for a few seconds the screen would go black. Then it would go back to the menu and then i could watch the video. later on it started totally freezing up and so i restarted it. when i did it showed little sad ipod. so i did it again and it started acting normal. later it started clicking sometimes while i was using the buttons. i now realize that is the hard drive. after that LCD juice in the screen starting coming out so i sent it in to get repaired. after a while i was so fruastrated with my ipod clicking and screwing up i started banging it on my couch and bed mattress. That made it freeze for a few seconds every time i pushed the buttons. i banged it on things some more and now what happens is every time i restart it it shows sad ipod. so i restart it again and this time it starts clicking, and it switches between the apple logo and the sad ipod twice, then says connect to computer to restore. so i connect it and now it switches between apple, sad ipod, and +very low battery, please wait+ for about 30 minutes then automatically switches to forced disk mode for i dont know how long. and it dosent connect to itunes whatsoever. So i'll say it once more: +*CALLING ALL MAGICIANS AND MIRACLE MAKERS*+

similiar thing happening to me except for the leaving it out in rain, banging it against stuff, LCD juice, clicking and screwing noises, and forced disk mode. so basically mine just goes to sad ipod when i try to turn on then shuts off, but when i have it connected to charger/computer it goes to sad ipod screen to low battery screen, restarts and repeats

Similar Messages

  • I think I did something stupid with iSync

    I am trying to get my Treo 650 to sync with my powerbook and iCal, specifically. Someone told me to get the isync conduit and install it and badda bing, my ical should sync with my treo. problem is, is now I cannot open isync, and when I try to install i sync v.2.1 it says I cannot because I have a newer version on my computer already. Since I cant open it, I am as you say, iscrewed! How do I find that application of isync, and or how to do get it all of my comp and re-install v.2.2? Thanks much~

    http://discussions.apple.com/message.jspa?messageID=3180082

  • I think I did something stupid

    Problem: System profile won’t acknowledge printer. No printers list under USB in print utility.
    Equipment: IMAC OS 10.3.9. Epson Stylus C60 printer.
    Stupid thing I did: When printer was giving me problems, I deleted printers from Print Utility list before downloading a driver.
    Steps taken: Per the Epson people, I repaired permissions. Threw out Epson folder from library.
    Results: No improvement. Is it time to restore my software? I should mention that some of my applications seem to be crashing more than usual and it’s running slow. Can anyone help with this?

    Hello grouchyfoglady,
    1. Try to download and install the latest printer driver from Epson.
    2. Download and install MacJanitor from http://www.versiontracker.com/dyn/moreinfo/macosx/10491
    Run the Daily, Weekly, and Monthly utilities.
    (In fact, run them regularly).
    3. If this doesn't help, download and run Printer Setup Repair from http://www.fixamacsoftware.com/software/psr4/index.php. Has a 7 day free trial period.
    Hope this helps.
    Bob

  • VERY cool site - how do you think they did this?

    http://jacksonpollock.org/

    hi,
    its done with flash actionscript using the drawing api. visit
    www.kirupa.com or www.gotoandlearn.com and they have a tutorial for
    it.
    gaurav

  • Is this normal? Do you think there is something wrong with my battery?(iPhone 5)

    It's at 22%, with  8hrs 42min standby. And 4hrs 37min usage

    It could be a defect battery what u have there, use it for a week, see if the health goes up.

  • I think I did something weird with foundation/server patching

    We've built many SP sites over the last 3 years.  We're now moving in to 2013.  most of our sites are 2010.
    For the old sites, both myself and my colleagues were just learning on the fly how to deploy and patch.  Over the years we've gained a better understanding of both.
    Something I've done though in the past, i don't know how it affects the deployments and I was wondering if someone could shed some light on it.
    We used SharePoint server with internet, mostly.  When patching, we saw that there were two sets of patches, foundation and server.
    We didn't have a full understanding of both but now do.  They are stand alone products.  However, we though they were component levels of the same installation, and for years we've been applying both the foundation patches, and the server patches
    right behind that.  It's worked fine.  We've never received any errors about patching.
    Now that I know better, i'm only deploying server patches to the new 2013 deployments.
    I was asked to add a 3rd server to one of our old farms.  I ran in to a patching mismatch warning when trying to join the farm.  This made me think about how we patched foundation and server even though we're running server.  One of the warnings
    was that those foundation patches were missing.
    So I restarted and used the exact same patches and it worked fine.  Still, i'm wondering what the overall impact of our old patching methods has on the product?
    My hope is that everything in SP foundation is part of SP server, so the patches I made, assuming the same level of patching, only duplicated patching effort, and there are no technical drawbacks to having patched foundation then server on the same environment.
    Anyone know?

    Hi,
    There are some different patches for SharePoint, to better understanding the different patches, I think you can have a look at the following articles which contains the different patches in SharePoint.
    Hey! Should I install this SharePoint patch?
    http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=433
    For example, the “cumulative” part means if you install the August 2012 CU you don’t need install the June 2012 CU first.
    CUs are also cumulative in the sense that the SharePoint Server patch includes the patches for SharePoint Foundation.
    The Project Server CU includes the SharePoint Server and SharePoint Foundation patches as well. You only need to install the CU for the product you have.
    This is a welcome change from SharePoint 2007 where we had to stack the patches.
    Also, CUs contains the patches for all the supported languages which is why they’re so large.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • I think I did something I shouldn't have :P

    so if you read my previous discussion, I was having iPhoto problems. I found an RC build of lightroom, and so thinking I had around 6,000 pictues in iPhoto, and thinking I'll just drag them all on the desktop, after a while I thought it wasn't a good idea, so tried to delete them and do eent by event, no my computer freezes, like I turned it off and turning it back on again, after 30 seconds to a minute, it freezes but I can still do the mouse. I thought it would be a good idea, but it wasn't. I just should have ben goingeen by event likee I was, but I thought this would be better. Any help is really apreciated. I'm on a different computer and have mine shut down to let it cool off before trying again. Trying not to freak out again. Running Lion

    Well, if you downloaded a release candidate of any software for free which has not been released publicly and would cost money if it was, then you pirated software. According to the ToU of these forums, we are not allowed to discuss such matters:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    I will say this much:
    Sounds as though you will have to wipe your drive and reinstall. Good luck.

  • I think  I did something really bad..need help please

    When my Iphoto 5 became very slow, I thought I'd be really smart and delete some files, but now I can't view my photos in the edit window, just the thumbnail. I think I deleted the IPhoto library. Can someone help me restore the settings to the proper way. I tried to import my photos from a cd, they import ok, but I can't view them. Help Please. Obviously I'm no pro here, so any advice would be greatly appreciated. Laura

    Well, that's a very bad sign but let's not give up yet.
    You indicated that you may have deleted the library. IF that's correct, you're screwed. Do your best to locate it. Although I've frequently told persons never to mess with the innards of the library, at this point you can't make things worse. If you can locate the library, take it apart and look for large files - 250K or larger. Those are your photos. Put them somewhere safe for the time being. (Small files are thumbnails or aliases.)
    Again, post back with results.

  • Uh I Think I Did Something Crazy

    Ok here's the scenario.  I saw two emails listed in the Hub from my designer and decided to read the first one.  I was then replying to her first message and it became sent prior to finishing my message composition.  So you know how it takes awhile to actually send a message (5-7 seconds), well I took that opportunity while the message was sending to try and halt the message.
    I highlighted the message while it was in the middle of sending but prior to the check mark icon and what happened was that the second email from my designer became deleted instead of the sending message.  It did not even ask me for delete confirmation.  I then looked for the second email everywhere and it was vanished into thin air.  I mean it was no longer on the mail server or in the Trash folder or in any other folder for that matter.
    What the heck is going on here?  Is this a bug?

    JamesDee55 wrote:
    This hasnt happened often, but it has happened enough to annoy me.. When in my email box, in the Hub, I go to delete 1 email, which I have 2 seperate emails. and not only does it delete the email I wanted to delete, but it will delete the other email also, for no reason whatsoever. ( I have a Z10 )
    And no, I didnt select "select more" to perform a multiple email deletion.
    This has probably has happened about 6 times in as many months..
    Yes that's what happened! 
    I had two separate emails and Z10 deleted one I did not even select. 
    That would not have been so bad if the deleted message went to the Trash folder instead of becoming permanently deleted without even a delete confirmation.

  • Help!i think i did a stupid thing to my quick time

    hi guys!!
    well this is a stupid mistake that i did
    i just uninstalled quicktime "Accidentally" because i was uninstalling another media player file.. then after 30 minutes of surfing and all that crap, i decided to empty my trash which i basically do everytime i can..
    only after did i know of the stupid mistake that i did... now i surfed the wed and read that itunes need quicktime to work but my itunes was working perfectly, either way i decided to reinstall it but the one that i got was version 7.6.6?? im not entirelly sure cause rite now im on my desktop.. and clearly the 7.6.6 version is very different from the one i used to have.... the one before was like a screen with just a semi tranparent control keys while this new one is a greyish boxy program that looks like it came straight from 2005..
    well now i am wondering if i actually still need quicktime to suport other programs(itunes etc.) or am i fine without it cause i already have VLC which i know how to navigate better with. and if i doneed the program, where can i dowload the latest version???
    thanks forreading this long *** post and please help me, thank you!!!
    p.s. i havw the new macbook air 13 inch, i just bought it 2 weeks ago and started using it for about less than a week.. its my very first apple anything so you will probably see alot of me in the future lol

    If you've been using TIme Machine or some other utility to back up your system, you should be able to just restore QuickTime X Player from the backup. Otherwise, you'll either need to reinstall OS X or extract QuickTime X Player from the OS X installer or perhaps the Combo Updater (which you can download from Apple) using Pacifist from CharlesSoft (not a free program). Whether you actually will need QuickTime X Player is something you'll have to decide.
    Regards.

  • HT4239 When I first started using my iPad 3,I thought Safari was just a regular homepage          offer by Apple. I replaced it with Google. This was about 3 months ago(due to illness) don't really remember exactly what I did.

    When I first started using my iPad 3,I thought Safari was just a suggested homepage offered by Apple. I replaced it with Google. This was about 3 months ago(due to illness) don't really remember exactly what I did. Could anyone help me restore Safari? Please,would so appreciate it. Mar.cia

    If you want Google as your homepage, open Safari.
    Type  www.google.com   in the address bar
    Then tap the action icon (box with a right facing arrow just to the left of the address bar).
    Then tap:  Add to Home Screen
    That you can access your homepage directly from your Home screen.

  • Is the data automatically synced after you do the original setuop or do you have to do something to make it sync? How are changes synced after the original setup?

    How is the information synced after the original setup? Is it done automatically or do you have do do something? And if so, what?

    After you setup Firefox Sync, you do not have to do anything else. It will automatically sync your data in the background. <BR><BR>
    See these articles for more information:<BR>
    [[How to sync Firefox settings between computers]]<BR>
    [[What is Firefox Sync?]]

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • Why do you think you have to (a) add extensions I don't want, (b) change my home page, (c) move tool bars around, (d) lord knows what else, at every update?

    Well, well, well. Here's update #32.0, without any idea what to expect. (Mozilla is turning into MicroSoft Light.)
    So okay, let 'er rip. Now I have this thing called Nimbus, which I don't remember asking for, and I have yet to figure out how to get rid of it. Thanks for blessing me with more stuff I'm never going to use.
    And gee, another new home page. Great. Is it not possible to leave my settings alone while you upgrade?
    And looky looky, my toolbar has been rearranged. Joy!
    I'm really sick of this.
    Free and open source or not, if I wanted continuous screwing with my software, I'd've stayed with Explorer.
    And let me put the "Reload Page" button where I want to put it, not where YOU think it belongs.

    hello, firefox doesn't add any third party extensions during an update - this rather sounds like adware that is present on your system. please perform these steps:
    # [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
    # afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
    # finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
    [[Troubleshoot Firefox issues caused by malware]]

  • Does iPhoto not have safeguards against accidentally deleting an entire photo book, which is very easily done (when you think you are deleting just a photo)? No "are you sure you want to delete?". No way of copying your book before, or restoring it after?

    Does iPhoto not have safeguards against accidentally deleting an entire photo book, which is very easily done with a single press of delete (and which can be done when you think you are deleting just a photo)? No "are you sure you want to delete?" before it happens? No way of copying your book while you are working on it (to make multiple versions of it, or just to have a safeguard copy), and no real way of restoring it after (since, remarkably, the photo books don't appear as items - items which could very easily be recovered otherwise)?

    I get a dialog box when I try to delete a book.
    And if you right click on the book in the left column you can duplicate it so you can have multiple versions.

Maybe you are looking for

  • Bouncycastle in wtk2.2

    hi everybody, when i try to build a midlet which imports from bouncycastle (import org.bouncycastle.crypto.CryptoException; for example) i get an error message: package org.bouncycastle.crypto does not exist i tried placing the java and org folders o

  • How to restore ipod in windows?

    Cannot use an ipod that was formated for Mac and now must be used with Windows.

  • How to do integration between Oracle 11g and SAP Data services

    HI All,           i want to load data from Oracle 11g data base to some other data bases. we have installed oracle 11g server in one machine and Data services server in one machine.we installed oracle 11g client in data services server machine . i cr

  • ORA-00341 and ORA-00312

    dear all i am using oracle 10 g operating system window xp. i am facing following error SQL> recover datafile 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF' ORA-00283: recovery session canceled due to errors ORA-00341: log 3 of thread 1, wrong

  • Error sync calendar outlook 2010

    hello, I have a problem syncing with my BB Q10 and outlook 2010. when I synchronize the phone with your pc I do not sync the calendar, and contacts that are there, what can I do? thanks claudio