I don't have any type of insurance for my new iPhone 5. I bought it on Friday, December 7, 2012
I don't have any type of insurance for my new iPhone 5. I bought it on Friday, December 7, 2012. Will I be able to exchange it for a new charger?
You can purchase AppleCare+ for your iPhone, but you must do within a month of purchasing it.
http://www.apple.com/support/products/iphone.html
If something is wrong with it, Apple will either fix it or replace it under warranty. You do not have to purchase any "insurance" for that.
Similar Messages
-
How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete. -
I don't have any drop down menus for burning playlist to disc
I had a computer crash and reinstalled itunes. Everything works except the burner. I dont have any drop down menus for burning the playlists to disc. What do I do now?
It has something to do with Segoe fonts in your Windows system.
Refer to this link from itunesTRK for solution on windows 7:
https://discussions.apple.com/thread/3782135 -
Yeah, I have been getting tons of updates for my apps, but since my iPod touch can only go to software 4.2.1 all of my apps have slowed down and crash,freeze, and don't get all the new things available on the other software versions. It is incredibly frustrating and kind of stupid to phase out the owners who have the older models that work just fine.
The 2G was introduced 4 1/2 years ago. That is old in electronics standards. It does not have the hardware to support a higher iOS.
-
Apple can't seem to help me with this verification of payment information message that I'm getting when I try to rent a movie. My payment information is correct, and they don't have any issues billing me for anything else. What can I do?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
My laptop and my iPhone both crashed I have lost all my contacts music and pictures is there anyway of getting any of it back for my new iPhone 4S
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
If for some reason you have failed to backup, tehn you can redownload some itunes purchases in some countries.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Everything else is gone, if you have failed to backup or sync it to icloud or some other cloud service. -
All the add-ons I had installed for the version 3+++ still working at the version 7, but the problem is that the extensions page in the add-ons manager is blank except a sentence that says "You don't have any add-ons of this type installed"
https://support.mozilla.com/en-US/questions/826729 has a solution for the problem
-
Hi,
I have completed my sap fico training, but i don't have any experience. I am an MBA finance having 6.6 years experience in accounts. Then can I get job in SAP field? & what type of course will do after MBA Finance? i want to do career in SAP Fico.Hi Mahesh,
as you have more than 6 yrs. experience , you can opt for sap field but the main thing is that still if your job hunt will get ended, you will be considered as ab fresher, so are you ready for those bucks you will get after you will become a sap FI/CO consultant.
Please understand one thing , if you wnats to make your career in sap field, you are most welcome, when it comes to a job for you in SAP FI/CO , you have to consider in your brain only middle or small size industry, because as far as i concern no single major company will provide you exposure to work with them (if you will get, its your good fortune). So, if you have decided to take a step ahead in sap FI/CO i will not give you negative thinking, if you are ready to negotiate in your renumeration in starting your career, then you can take a foot ahead, but look a job in middle size or small companies only, i think through this you will get any exposure more easily. -
I had my iPod stolen out of my school bag. I was told to use iCloud to find it. But when i got onto iCloud it said something like i don't have any devices set up or something. Any idea of what i can do to find my iPod location?
On your iPod Touch.
iCloud- Find My iPhone overview
Find My iPhone
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
Please HELP. !
There is no option called ( none ) on my payment method and i don't have any available credit-card now !Howdy there Asaryeh,
It sounds like you want to select None as an option in your iTunes Billing info. This article explains why that is not available, and the criteria for being able to select it:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366?viewlocale=en_US
If you want to select None and remove the payment information or credit card from your account, follow these steps.
Using an existing iTunes Store or App Store account
If you have an unpaid balance or payment due, you can't select None as your payment type. To see which order you need to pay for, view your purchase history. When you sign in to the store, you may see a message that there was a billing issue with your last order. Click the Billing Info button to see the order.
After you pay for the order, you can change your payment information to None.
Creating a new iTunes Store or App Store account
When you create a new store account or sign in with an existing Apple ID (that you haven't used in the store), you must provide a payment method. If you want to remove the payment method after you create the account, you can change your payment information to None.
If you want to create an account with a new Apple ID, follow these steps to create an account without a credit card.
Changing the country or region for an iTunes Store account
When you change the country or region of an existing Apple ID, you must provide a payment method. If you want to remove the payment method after you change the country or region, you can change your payment informationto None.
Thank you for using Apple Support Communities.
All the best,
Sterling -
I don't have any unread email in my Iphone 4s (IOS 7 Updated ) but still it is showing 26 unread email, why is that so ??
Type unread in the search box and delete all of the messages that come up this will resolve the issue.
-
How do I create an icloud id on my pc? I don't have any apple device.
Is it possible to use create an icloud id on android device or a windows pc? I don't have any apple device.
http://www.apple.com/ca/icloud/setup/pc.html
Try this link. You will need to have an icloud account and other Apple devices but this will help store pictures etc. not sure what you are trying to do but maybe this will help. -
I need to migrate CUCM 8.6.2 from 6.0.1 but don't have any DVD of old 6.0.1
Dear Experts,
I have new project which has been abandon for long and assigned to me recently.
I know what is the steps we need to work.
1. DRS from current CUCM version
2. Install same version of 6.0.1 to new Server
3. Backup from step1.
4. Upgrade to 8.6.2(it is not direct support, so I have to upgrade to middle version first)
But customer doesn't have current CUCM(6.0.1) version of DVD and I cannot find the version from Cisco site as well.
1. Can I export BAT from old version and import BAT to new version ? will it work ?
2. I don't have any bootable version either of old or new, so I need to make bootable after download from Cisco site.
I googled and some site said I can copy bootsector from bootable DVD and copy to new DVD, in this case even though it is not same version, for example, if I copy from 10.5 version and copy to 8.6.2, does it make bootable DVD ?
3. How can I remove all configuration on CUCM ? is it CLI command if I can ?
Thanks in advance
JasonHi Jason,
There is a way, however if you got into any bad situation or needed any help during the process TAC WILL NOT be able help.
http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html
Try this method, and you should be able to create bootable DVDs from non-Bootable ones.
Secondly, you may raise a TAC SR and request them to release the Bootable media for 6.0.1
HTH -
My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I noticed that my Instagram is at 732mb and it keeps rising. Now it's at 814mb. Please help!!!!!
What is the precise wording of the message that is occurring?
Are you attempting to update via iTunes on a computer or over the air on the device?
How much free space is actually on the device?
If updating via iTunes on the computer, how much free space on the computer? -
I have updated my iPhone 3Gs to the latest software in an attempt to iron out a problem with a new telephone network provider (Tmobile). I had backed up my phone before I did this. Now I have lost my music and apps. I can't sync the phone with my Mac, I can't re-download from iTunes as the phone says I don't have any music or apps available to re-download although it all shows up on my Mac. The music and app content cannot be restored when I try to restore the phone from the back up I madeon my Mac. Help!
Working on that now. I'm just getting frustrated that everytime I run updates for the phone I end up with tech problems that I have to spend time solving as opposed to updates that actually improve my usage. Now I will once again get to spend hours reloading my phone all for updates that didn't affect my usage in the first place.
Maybe you are looking for
-
I can no longer paste into my google search bar after updating to mavericks
i just updated my mac to mavericks and now my google search bar does not work when content is being pasted into it. Anyone have some suggestions/quick fixes?
-
Variable list updates in cli with cdb.vs.mod when values have spaces
Hi - I keep variable lists for composite components in SVN - stored in the same format they're downloaded from the variables settings screen (don't forget to restore the missing semi-colon on the next-to-last line). Then the build scripts run this:
-
What I want to do is , have two images on image displays and the pass them through the same setup as the pattern matching example to get the number of matches , I have attached what I have done and also given the pattern matching example program as w
-
hi all, please help. on starting up i get a pop up warning saying "insecure startup items folder detected" it doesn't have any of the usual options to " fix now" " fix later" etc: i just shut it and everything seems to work ok! if i look in the folde
-
We are implementing EDI X12 over AS2 -Seller EDI X12 over AS2 -Buyer tutorial and we require X12_4010_850_PO_Sell_Side.bpel.Can you please let us know where it is located or send us this file at [email protected] Regards Lalit