After automaticly updated to the version 7 the extensions page in the Add-ons Manager went blank and give this sentence "you don't have any add-ons of this type installed" but all the add-ons still working in the program

All the add-ons I had installed for the version 3+++ still working at the version 7, but the problem is that the extensions page in the add-ons manager is blank except a sentence that says "You don't have any add-ons of this type installed"

https://support.mozilla.com/en-US/questions/826729 has a solution for the problem

Similar Messages

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

Cannot move the items. You don't have appropriate permission to perform this operation.

Recently, I upgraded outlook from 2007 to 2010, but I got a problem that I cannot move any mails to personal folder and the error msg is "Cannot move the items. You don't have appropriate permission to perform this operation.".Even I create a new personal
folder in 2010 and try to move mails to it, I still get that error message.
Can anyone help me out please?
Thanks so much in advance.

I've experienced the same thing and was unable to find this key that Tony mentioned. After searching numerous sites, i found this instruction set below and tried it and it worked. Per my case, the key PstDisableGrow was set to 1 under ...\Software\Polices\...
instead. I disabled it and bam, it worked. Give this a try...
Your System Administrator has either enforced a group policy to prevent pst files growing in size or a registry key is present preventing the growth of pst files. One of the following
registry keys will be present based on your version of office (11.0 for Office 2003, 12.0 for Office 2007 and 14.0 for Office 2010). The example below is for Office 2010 (14.0):
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\PST - DWord Value: 'PstDisableGrow', Value: 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\PST - DWord Value: 'PstDisableGrow', Value: 1
Best of luck!

How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes?

How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes? I already went to the folder of iTunes inside the Finder and change all permissions to allow read and write... no improvement at all. Any help? thanks!

Hi! I just realized I have two folders called library, one is inside HD alongside with System and users, then I have also "library" inside users, some of the folders are apparently repeated, some are missing. And all the music is inside a folder called iTunes Music, inside Music, inside users. Now that I relaized some folders are repeated I applied to all related to iTumes r/w permission. But the annoying message keeps coming on.
And yes, I am using Leopard, 10.5.8.
Any ideas?

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and I give myself permission. What can I do to save the file?

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and give myself permission. What can I do to save the file? This is the user's PC, licensed PS CS5 software and Win 7 OS.

Temporarily save to another folder, until you figure it out.
Just because you are the owner and are the sole administrator, does not always guarantee that you have permission. There are several folders that you can not access no matter how hard you try. As for folders in your document folder, it is more likely a basic permission setting that took on permissions of a copied file. Some folders and files are set to a child/parent default setting, meaning the child folder/file (the one you are accessing) has the identical settings of its parent and when the parent changes, so does the child.
You can alter the parent or the child folder/file.
Right click on the folder/file select properties.
Click on the security tab.
Click on each of the group names and see what permissions are set.
You can then edit a group if necessary.
If it will not allow it, you may need to use the advanced button to create a new copy of the group which should happen when you alter its settings (In other words, you don't have to physically create the copy, it does it for you when you OK the changes)
The administrator should have full access to the folder in the documents folder, if you are listed as an associate of the administrator group your name should also be listed there with full access. The System should also have full access.
All other groups should have reading access only if they exist.

Can not save the attachment you don't have appropriate permission to perform this operation

i opened outlook.exe file then i have an error like cannot save the attachments you don't have appropriate permission to perform this operation so please solve my error

Hi,
Before this issue occurred, what did you perform in Outlook?
Based on the error message, it seems like a permission issue. Try to run Outlook as administrator, check if the issue persists.
Please also try to start Outlook in Safe Mode. Sometimes the 3rd-party add-ins will cause the Outlook startup issue, run Outlook in Safe Mode will disable these add-ins:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
If there is no issue starting Outlook in Safe Mode, consider to disable the suspicious add-ins from FILE -> Options -> Add-Ins.
If the issue still exists, please send me the image of the error message and let me know in detail the steps you performed before this issue occurred. To protect your private information, please send the image to our email address:
[email protected]
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

The iphone cannot be synced. you don't have enough access privileges for this operation

the iphone cannot be synced. you don't have enough access privileges for this operation
contacts ,calander and notes get syncronised but apps do not . at 4 stage above message come

If you still want to sync your photos try this instead:
1. Go to the Pictures folder in the Finder window (Pictures usually appears under Favorites in the sidebar of the Finder window)
2. **Locate the iPhoto Library file and Right click on the file and select Show Package Contents.
3. Locate the iPod Photo Cache folder and delete it.
4. Try the sync process again, it should work.
** Sometimes the iPod Photo Cache folder is simply in the Pictures folder and step 2 is not necessary

"You don't have permission to save in this location." Cannot save any files anywhere. All permissions open, all other browsers save OK in same place. Why?

I cannot save any files anywhere. I always get the message "You don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the {} folder instead?"
I have created a clean profile in Profile Manager, and used the Reset Firefox tool. The only way I can save files is to use another browser. IE and Chrome have no problems saving files to the exact same folders.
This seemed to have started with the last update on 10/5/2013.

Maybe something changed in the program shortcut you use to start Firefox. Can you check right-click > Properties > Compatbility tab and make sure nothing is selected there?
''I've never tried this myself, but the forum has a standard set of steps for a "clean reinstall" of Firefox to replace damaged program files. During this process, you are not removing personal settings, but you are removing some shared add-on folders, which would affect Windows Media Player and perhaps other plugins/extensions installed that way.''
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete (or if you're nervous, move or rename) the Firefox program folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox (32-bit)
#**C:\Program Files (x86)\Mozilla Firefox (64-bit)
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Does that help?

Why all of a sudden am I seeing: FORBIDDEN You don't have permission to access / on this server.

I can normally access Firefox with no problem. Now when I try to connect to Firefox I see an error message that says: FORBIDDEN You don't have permission to access/on this server. What's up with that? How do I fix it?

Maybe the server is down for maintenance or updating.<br />
Can you post a link?

Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.

Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.

You can take a look at this support document for troubleshooting iMessage and FaceTime activation. If you have difficulty activating FaceTime or iMessage - Apple Support
I believe with the iPhone, you need to have a SIM installed, since the activation sends an international SMS to servers in the UK. Check to see what that support document states.

When I open the itunes it says that the file is locked or on locked disk, or you don't have write permission to open this file

When I open the itunes it says that the file is locked or on locked disk, you don't have write permission

See:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

If you don't have any pic's on you iphone when you sign up for icloud dose it sign you up,, I can't tell if it worked...

if you don't have pic's on your I phone and you sign up for i cloud, how do you know if your signed up,? I can't tell if it worked.

Same thing on mine, it just started happening last weekend.

My iPad 2 screen has gone blank. I don't know whether the iPad is on however when the screen went blank there was 97% battery. Does anyone have any ideas as to what the problem maybe. ?

The screen on my iPad 2 has gone blank.i can't tell whether my iPad is on or not. When the screen went blank there was 97% battery. Could anyone possible give me an idea as to what May have happened and if it can be fixed.
Thank you, Nicky .

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

"You don't have any add-ons of this type installed." despite having multiple add-ons

Since upgrading to FF 8.0.1, I get the above message when I attempt to access Add-ons, Extensions on my iMac, despite having a number of different extensions installed, all of which appear to be actively working. The problem does NOT appear on my Macbook Pro, also running FF 8.0.1. Both systems have OS X 10.7.1 running. I have tried restarting FF, rebooting, and, of course, clearing the cache.

It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.com/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.com/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

After automaticly updated to the version 7 the extensions page in the Add-ons Manager went blank and give this sentence "you don't have any add-ons of this type installed" but all the add-ons still working in the program

Similar Messages

Maybe you are looking for