I downloaded the new 4.0..I don't like how everything is set up now. How do I get it back how it was set up on the page? Plus my cache doesn't work now.

I would like to know how to get it back how it was set up for bookmarks, history etc. I don't like how it is set up now.

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Similar Messages

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

When I updated Facebook 6.7.0, It didyn't complete the updating and my Facebook doesn't work so I deleted it. What can I do now to downgrade it ?

when I updated Facebook 6.7.0, It didyn't complete the updating and my Facebook doesn't work so I deleted it. What can I do now to downgrade it ?

If recovery mode did not work, try DFU mode, but don't use the latest backup to restore from after you have set it up "as new ipod" again.
DFU mode

My iPhone is acting up again; freezing up during phone calls and now the head phone jack intermittently doesn't work.

I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
<Re-Titled By Host>

The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out.

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for

I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for

Thanks for replying, I'm a real techno-cretin. What do you mean by not using the backup? I'm busy trying to restore my new phone and it's doing a 6 hour download with updates. Can I restore the data from my old phone backup onto the new iPhone 4S when the download is done?

My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.

My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.

Have you tried accessing the email from another computer, device, email client or web browser?

Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen?

Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen? Thank you.

Sadly Snow Leopard was the last OS X to have Front Row and it is no longer offered in Lion or Mountain.
see > Farewell Front Row | Macworld
If you want, you can get it back with some tweaking.
see > Get Front Row for Mac OS X 10.7 Lion
or > Use Front Row In OS X Lion
Also note: that your remote should still be working for waking the Mac, volume control and iTunes...? If it is not, let us know for help with it.

I transfered my iWork '09 to my new Mac Air. Now my Keynote won't open. I get message, "An unexpected error has occurred, please quit and reopen Keynote." This doesn't work.

I transfered my iWork '09 to my new Mac Air. Now my Keynote won't open. I get message, "An unexpected error has occurred, please quit and reopen Keynote." This doesn't work.

so Keynote still isnt working after installing, I thought you had it sorted from your last post.
If you have not done so remove any files relating to iWork and Keynote and reinstall iWork
files that must go are:
the iWork ’09 folder from the main HD > Applications;
the iWork ’09 folder in HD > Library > Application Support
the individual iWork application plist files found in HD > Users > (your account) > Library >
There are a number of free application removal tools that will do this for you:
trashme       webpage
apptrap        webpage
appcleaner   webpage

Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work

I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!

Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1&#4 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong?

My iPad screen is black but the iPad itself still works. I reset the iPad but it still doesn't work. What can i do?

When i went onto my iPad this morning it was completely fine and working but once i took it to college with me the battery had ran out, so later on tonight i plugged my charger in and left it charging for about half an hour, when i went to go back up onto it was just a black screen and every so often when i pressed the power button it would flash blue for a split second then be blacked out again...
So i had a look on this community to see if there was any solutions that could help and i found a case similar to mine so i tried to reset in hopes that it worked but it never did. I know that the iPad itself is working as i managed to unlock my iPad when putting in my passcode and i was able to get notification through as well, but after the reset i saw the apple logo appeared and it flashed a few times and i could see the setup on the screen to set it up as a new iPad.
I don't know how or why the screen will not work properly, so any help would be great

Hello there, Courtney_May.
The following Knowledge Base article addresses intermittent display issues on iPhone, but is applicable to your iPad as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have the new iPad . I don't know how my sister's apple ID was set. I have all under my iTunes account but when i need to update my apps, a different apple ID come up! how do i change that?

I have the new iPad . I don't know how my sister's apple ID was set. I have all under my iTunes account but when i need to update my apps, a different apple ID come up! how do i change that?

Hi maggieanntb, your sister's Apple ID came up because an app(s) was downloaded using her account. To prevent that from happening, you would have to delete the app(s) that were downloaded on her's, and re-download them using your own Apple ID.

I´d like to export my iphotos macbook pro.everything worked right when I installed impression for iphoto but when I installed impression 2 for iphoto and I restared my computer the export option in iphoto doesn´t work.Can somebody please help me ?

I´d like to export my iphotos "macbook pro". Everything worked fine when I installed impression for iphoto but when I installed impression 2 now I can´t export my photos. I´ve restarted the computer but still it doesn´t work.
Please can sombody help me with that?
Thank you

Are you running Snow Leopard or Lion? Your info says Snow Leopard. If it's lion then:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Then you can locate the folders mentioned.

I downloaded the updated Firefox, but the ad-on for converting YouTube music videos to mps files is now unavailable. How do I get it back? Why was this feature disabled?

I downloaded the updated Firefox, but the ad-on for converting YouTube music videos to mps files is now unavailable. How do I get it back? Why was this feature disabled?
In the former Firefox version there was a box to click for converting YouTube music videos into HQ mp3 files. That box is no longer apparent in the new Firefox version. I went back to Ad-On s and re-downloaded the program YouTube to MP3 1.2. It says it's not compatible with Firefox 6.0. Can I reinstall the older version of Firefox?

When I clicked on the second site mentioned, I got such EXPLICIT, step-by-step directions!!! Thank you so much. I'd been wondering what that window was that kept popping up with the Firefox icon and that other funny thing. The word *install* was never mentioned. Pictographs were never my thing.
When I looked under the initial system requirements, it said that OS X 10.4.5 and higher were good for 5.0. I didn't check further. Under your advice, I'll go with the older version. Thank you for taking the time to help me.

Cache doesn't work with Apace-WebLogic bridge

Hi.We noticed a problem with the download performance of our Java applet with Netscape. It's a tiny applet of 300K that takes only 2 seconds to load using IE, because it is already cached, and with Netscape it is always reloaded and the cache doesn't work.The applet is located on a WebLogic server, and we access it through an Apache server that redirects all requests to the WebLogic server. We noticed that when we access the WebLogic server directly, Netscape cache works fine. However when using the bridge, Netscape ignores the cache, while in IE the cache still works.The Apache server is installed on RedHat Linux 7.1. The bridge is a WebLogic module developed by BEA (the makers of WebLogic) that extends the Apache functionality and enables it to act as a proxy and leave the client (browser) totally unaware of the redirection. The requests are sent to the Apache server and the responses appear to be coming back from it as well.We need to understand why the cache doesn't work when using the bridge. Can you please tell us if you know of this problem or not, and if not -- point us in some direction to check for the problem.Thanks.

You have to modify the password manually in OEM's target.xml.

I downloaded the new 4.0..I don't like how everything is set up now. How do I get it back how it was set up on the page? Plus my cache doesn't work now.

Similar Messages

Maybe you are looking for