I dream of growing up to become a Labview Forum Veteran one day

Hi!
How many brownie points do I need to chalk up before promoting from a member?
Goy

JoeLabView wrote:
jr_2005, Don't
feel bad..  Once you have fun with LV, you'll have an edge.. 
You can go back & forth.. CVI / LV / CVI / LV / CVI / LV / LV / LV
/ CVI.. We all started like you..  Everyone... well..... maybe except Dennis.... He's special.... ... and so is tst
I didn't start like that either. I can't even spell sea vee eye correctly.
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

  • My iPhone 4 after upgrade to iOS 6 become weak signal wife, some one please help me to overcome this problem

    My iPhone 4 after upgrade to iOS 6 the wife signal become very weak, please some one can help me to overcome this problem

    I had this too when I updated to iOS 6 today.  Solved it by doing a restore to factory conditions followed by a restore to my last backup.  Now its idling around 45% CPU and is back to its snappy performance.

  • Safari has become very slow the last few days, only on a few programs - google, youtube, wikipedia.  Also mail is slow to send and receive.

    Safari and mail have become slow only the last few days.  Mail is slow to send and receive, but e-mails do come through.  Safari is very slow to load on only a few web sites - google, wikipedia, youtube.  But fine on others.
    OS X  10.6.2
    Safari  4.0.3
    Mail   4.2

    Hi Andy...
    safari, Mac OS X (10.6.3)
    10.6.2 / 4.0.3...
    Whether you are running Mac OS X 10.6.2 or 10.6.3 your system software is completely outdated.
    Click your Apple menu icon top left in your screen. From the drop down menu click Software Update.
    Your Mac OS X needs to be at v10.6.8 / Safari should be 5.1.7
    And make sure there's enough free space on the startup disk to install software updates.
    Right or control click the MacintoshHD icon on your Desktop.
    Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    edited by:  cs

  • I recently become an ACMT and in one of the documentaions they state that you get a certificate: "Display your personalized certificate and a logo that distinguishes you as an Apple Certified professional." How do I get this certificate to display?

    I became an ACMT not too long ago, but never received my certificate with my name on it. Is there a way that I can get that certificate still?

    These are user-to-user forums.
    Maybe you should start here:
    http://training.apple.com/certification/records

  • My laptop becomes slow after incurring privacy issues (118000 in one day) that are noted as being mozilla profiles

    I clear my laptop with A S C programme but latest review identified 118000 privacy issues in less than one day. This is a regular problem. Needless to say this overall issue slows my computer down until I clean it up again. The programme I use identifies the privacy issues are down to Mozilla profiles.

    Separate Issue;
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 15.0 r0
    Shockwave Flash 11.8 r800
    Having more than one version of a program may cause issues.
    Flash is notorious for not cleaning out the older version as part of an update.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''v15.0.0.189 http://get.adobe.com/flashplayer/'''

  • I want to become a Labview programmer and I have no programmin​g experience where do I need to start to learn labview programmin​g

    I have had LabVIEW Basics 1 and 2 what do I do next?

    I always recommend the course of action that I took when I learned LabVIEW (in one week).
    Go get "LabVIEW for Everyone" and "Power Programming". They are readily available through NI's website, or through a good technical bookstore, or even a college bookstore. From there, just go through the example programs.
    I strongly recommend also learning good style. LabVIEW comes with a style guidelines book (which, apparently, only 6 people have ever read...) This will get you started on the road to good practices. LTR is also a good resource.
    Good luck.
    Oh, also, when you have gotten some experience, I recommend taking Advanced. I took it (three years after I learned LabVIEW) and was very happy with the course.

  • The images become dimmer than the original ones

    I am using "Camera Raw 4.5" and my camera is D60.
    When I just open the raw file in photoshop, the image shown in the preview window is much dimmer than the original. After saved as jpg, the image is also dimmer than the original (just the preview one).
    However, when I directly convert the raw format to jpg format, the image is sharpe. This is what I said the original one.
    Thanks.

    You may find that the quick preview (the one you see when you first look at the photos in Bridge, and the one you see in Windows Explorer) is how you expect. This is because raw files contain small jpeg images created by the camera, which are used for previewing the raw image capture.
    Your problem is a common one, and it isn't really a problem as such. What you are seeing is the raw conversion achieved using the software's default settings. You need to change the default settings.
    If you install the DNG Profiles, located here:
    http://labs.adobe.com/wiki/index.php/DNG_Profiles
    you can change the camera calibration profile to something better like Adobe Standard. You can then save the setting as Camera Raw Defaults. From then on, all previews and default conversions will be made using these settings.
    If you've set non-standard Picture Controls in your camera, you can pick one of the 'Camera X' profiles instead, to approximate the look. But, arguably, Picture Controls are designed for JPEG shooters, and the desired effect is better obtained through use of Camera Raw's sliders.

  • 4g service has become non-service for past 10 days

    My 4g service which I have been using for the past year became "not available" on my mifi log. I have called V several times and most techs have tried to evade the antenna issue and blame my equipment ETC...
    The transmissions have reverted to 3G for the past 10 days and last night it fell to 1X for a short period of time and then returned to 3G.
    I have a IPAD so just to try and nail down the problem I decided to take my IPAD and MIF router in my truck and turn on logging to map coverage in my area and capture screens of the log as I moved around the area.
    What I found is that I can pick up a 4G signal within 2/10th of a mileonly  in the northeast quadrant of the cells area. I drove around the southern arc of the towers general area and the only transmission was 3g. Even  directly under the tower there was no 4G transmission.
    When I returned to the northeast quadrant 4g came on again.
    I was able to find a person in tech support who asked me to compose a email of the logs with info about when and where etc.
    I sent the complete email  to her and she responded that she had forwarded it to the network dept for analysis.
    Have not heard back yet..
    BTW... THe 3g logs reveal that it is in a special roaming mode 64.... whereas in 4g roaming is zero.....
    So as of now I am not happy at all......

    I sent a another email this am to a contact in tech support re: special roaming code 64. She also responded to my. previous email that I wrote about on the previous post. Here is her response
    I wanted to get back to you and let you know that the ticket that I opened for you on the 5th has made it higher than any other ticket has made it so far due to your screen shots you submitted to me and I was able to add into your ticket.  Our System Performance team is taking a very hard look at your area to see what can be done to help you.  As soon as I hear something, I will let you know.
    I have also requested info on  "what "special roaming" code 64 means"
    This is more then I have had in the past.... Perhaps things may happen ... "I hope"

  • Just a few questions...

    This is concerning iPad, but it is also concerning Apple devices as a whole. Now, don't get me wrong. I absolutely love Apple and will most likely never switch to another device, be it phone, MP3 player or tablet (can't afford a Mac yet, but that's my goal one day). However, I am curious as to why its user-friendliness is not as user-friendly as other devices, such as Android. With Motorola, Android, Windows, you are allowed to change everything as you wish, such as text message alerts, new mail alerts, etc. Yet with Apple devices, you are forced to just deal with whatever sounds and themes they offer. Like with my Android phone I used to have, and Blackberry as well, I was able to change the theme, text alerts, etc. But when I updated to the iPhone 4, I could only change the ringtone alert and had to make do with the text alerts that came with the phone. I also do not care for the new mail alert with iPad and wish to change that, but unfortunately cannot. Now, I know that if you jailbreak Apple devices, it unlocks all these cool features that one would assume were included in a 500+ dollar device. I am just curious as to whether anyone here would think that Apple might grow to be less strict concerning their devices one day or are we stuck with whatever they think we need? This again is not a rant or anything or hatred towards Apple devices, but a question as to why they did not make their devices more personal. I am happy with my devices, but sometimes I wish I could do more, without voiding the warranty like jailbreaking does.

    I have been reading that there will be changes coming in the next iOS 5, however it really is speculation at this point and until Apple unveils anything we won't know for sure.
    I use my devices for it's media purposes because that is the field I work within. The points you brought up don't really make much difference to me. I find Apple devices very user friendly, what you are referring to is a more personable/unique device tailored to you.
    Now I don't disagree a lot of people would like to do that but no one can speak for apple and that is not really what these discussion boards are for.

  • Lack of information when ordering a phone from the store

    I recently became eligible for an upgrade on my phone so I went to the store to get an iphone 4s. I should have called the stores before since none of them had the iphone in stock. I figured I could just order the phone at the store instead of going all the way home to order it on my computer. I went through the order with one of their representatives. Once it was done, I given a receipt and told the phone would arrive in two days. 
    I went online once I got home and noticed that the order status had not been updated on my recent order (I was sent the order confirmation via email). There was just a blank space next to the tracking number. I assumed that I had checked the order status too soon and that they would have a tracking number posted the next day. NOPE! Luckily, I went to My Verizon account to see if their was any information there and noticed that there was a red notice at the top of my page saying that I needed to approve the terms and conditions contract before my order would ship. I was never told by the representative that I needed to have this approved. If I hadnt happened to check my verizon page when I did then I may have not figured out what was going wrong with my order. 
    I was also confused about the terms and conditions stating that I was going to be charged the $350 early termination fee. As I said, I had become elibible for an upgrade one day prior to seeing this notice so an early termination fee should not have applied. I ended up calling Verizons customer service to get some answers. I found out that the phrasing on the website is horrible and that they were not charging me the early termination fee for my most recent purchase. The costomer service representative informed me that in addition to setting up a new two-year contact for the iphone 4s, I needed to approve the terms and conditions stating that if I need to get a new device after receiving my iphone that I will be charged the $350. That was not well communicated at all on verizons approval page. 
    The whole process was extremely frustrating. I hope this helps anyone else that has similar problems.
    Here is a way that Verizon can remedy this problem:
    Change the information on their order status page. Instead of having a blank space next to the tracking number, they should provide customers with a little feedback. Maybe provide customers of the actual status of their order. If Verizon needs more information before placing an order, such as approval of the terms and conditions, then it should say something such as "contact customer service" or "terms and conditions needs approval before shipment". If they have received the order but haven't shipped it yet then that should be helpful feedback too. 

    God morning meowpants39,
    Thank you for providing your feedback on the iPhone 4S order process. Please accept my apologies on the lack of communication about the terms and condition prior to leaving the store. May I ask did you receive your new iPhone 4S yet? If not then I will be happy to check the status of your order. If you have your confirmation number then you can check the status using the link posted below.
    http://www.verizonwireless.com/b2c/orderstatus/OrderStatusForm
    If you do not have your confirmation number or if you haven't received your tracking number then please send me a private message with your full name, mobile number, and a brief description of the issue on the iPhone 4S. I can contact you and provide you with the status of your order.
    Thank you for allowing me the opportunity to assist you today...

  • Computer chatter when using direct out and splitter box

    Hello
    I have recently purchased a line6 bass amp and when using the direct out for recording I get computer chatter through the speakers.
    I also get the same problem using a splitter box. One lead to the amp and the other into the interface. As soon as I plug into the interface the chatter comes back.
    I also have the same problem using a splitter box to a guitar amp
    I have a recording studio and use top quality leads
    Presonus tube preamps and M Audio interface.
    If I plug an instrument or mic in........... no chatter at all. Only with direct out and splitter box does the problem arise.
    Previously I have recorded my amp and then a DI track separately but would like to record them simultaneously
    Has anyone else had this problem and did they find a solution?
    Thank you

    There are loads of posts in these discussions concerning the problems that people have when they upgrade. The gist of it seems to be to make sure you know which plug-ins, samples, devices, & drivers you have +in advance,+ so that when they don't work you will be prepared & will know what to do.
    The shocking truth is that some items that we can become quite dependent on will one day very likely just stop working, & will never work again after that.
    I hate it when that happens. OTOH, I have eight Akai S612 Samplers, & they all still work…

  • Nokia Lumina 800 Change Font Size ?

    I just got a new Nokia Lumina 800, and the text font is so small I cant read most it.
    (I've some replies where nokia are claiming itsa 'visually impaired' problem. Nokia take note.... I had an eye test recently and have 20/20 vision).
    Googling I cant believe there is no facility to change font size. YOU CANT CHANGE THE TEXT FONT SIZE ??? Was the device only useability tested on teenagers ?
    Nokia:  so my question is specifically WHEN will there be an update to correct this ? Or do i return the device and switch to android ?
    I'd priortise this a an URGENT issue.

    @ kevgallacher
    You are very lucky to not have an issue with the font size, some of us don’t have perfect vision and it would make life a lot easier to be able to choose a font size and colour that best suits our own visual ability. If you open a contact up and have a look at the headings which are in white against the black background (if you have dark set for back ground) then under that is the details that you enter, they are almost half the size of the heading font and are the same colour as the selected theme so I have chosen the lime green theme as this helps to make them clearer for me. Don’t know if you have heard but some people do suffer from colour blindness so some colour combination mean that they wont see some colours at all. So please this is an issue for me and some other users, I happy to hear your vision is excellent and its not a problem for you but it may not be like that for ever so this might become an issue for yourself one day. Please Nokia have a look at this and update it to either allow us to customize the font or allow pinch to zoom.

  • Keyboard Power-on - is it possible?

    Hi,
    We have a bunch of S20 at the office and they are placed inside a ventilated desk. I want to know if it is possible to set up the BIOS to allow the box to be switched on from the keyboard without asking the staff to duck under their desk, open the cabinet and switch it on manually?
    We have other brands of desktops lying around and they can all do keyboard power-on.....
    We already have wake form keyboard configured which is great then things are normal. But if for some reason the box will not shutdown or logoff from any number of windows problem they'll need to perform manual restart.... I can see this becoming an OH&S problem one day....
    So does anyone know?

    Thanks for your clarification. I can understand the WOL / event timer for a power management point of view (e.g. wake computers up in the morning).
    However I'm after a solution for a hard reset after the system goes unresponsive. I could / will hook up an external switch via the power button jumpers on the mobo [you probably dont want to hear this ]. but I just thought I'd exhaust the official avenues before I do a hack. Thanks.

  • Transaction log usage grows due to replication even if I don't use replication at all

    Hi
    The transaction log usage keeps growing a lot on my user database since few days back. the database is in full recovery model and I do transaction log backups every 10 minutes. The DB was part of Database Mirroring but I removed it. The usage was controlled
    for many years by the backups but something happened that is messing up the transaction log
    this is DBCC OPENTRAN
    Transaction information for database 'MyDB'.
    Replicated Transaction Information:
            Oldest distributed LSN     : (0:0:0)
            Oldest non-distributed LSN : (1450911:6823:1)
    DBCC execution completed. If DBCC printed error messages, contact your system administrator.
    log_reuse_wait_desc reports REPLICATION
    the funny thing is that I am not using replication at all. I am using CDC.
    To reduce the transaction log usage I run below statement every day since the problem started
    EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, 
        @numtrans = 0, @time = 0, @reset = 1
    Any idea what should I do to solve this problem and be back on a normal situation?
    BTW, The server is SQL 2012 (11.0.2383)
    Thanks
    Javier Villegas |
    @javier_vill | http://sql-javier-villegas.blogspot.com/
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

    CDC uses the replication log reader agent and if you manually ran sp_repldone like that you lost information in your CDC capture.  If the capture job can't keep up with the workload or is not running for CDC, you would have the exact problems you describe.
     If you execute sp_repldone like that, you might as well disable CDC.
    http://technet.microsoft.com/en-us/library/dd266396(v=sql.100).aspx
    Jonathan Kehayias | Principal Consultant | MCM: SQL Server 2008
    My Blog |
    Twitter |
    MVP Profile
    Training |
    Consulting |
    Become a SQLskills Insider
    Troubleshooting SQL Server

  • Sparsebundle keeps growing rapidly

    I have 2 macs with 500 GB Drives backing up to a 2TB time capsule, about 250 GB of used space on each.  The spares bundle on one keeps growing until it hogs all the space.  One sparsebundle now it occupies 1.5TB, will not allow further backups, and has deleted all but the most recent backup.  The other one stays at about 370 GB, but still contains several months of backups.  Why does one keep growing, and what can I do to correct this problem.
    Thanks.
    Ray R

    It sounds like more than the internal HD is getting backed-up.  Are there other drives in or connected to the "rogue" Mac?  
    See what it shows for Estimated size of full backup under the exclusions box in Time Machine Preferences > Options.  If that's larger than the 250 GB or so that's on the internal HD, exclude the other drive(s) you don't want backed-up.
    It's also possible that sparse bundle is damaged.   A clue may be lurking in your logs.  Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs.  Locate the most recent backup from that Mac, then copy and post all the messages here.
    Either way, your best bet might be to delete the sparse bundle for that Mac, per #Q5 in Using Time Machine with a Time Capsule (via Ethernet if at all possible, as that will take quite a while).
    The next backup of that Mac will, of course, be a full one (so do it via Ethernet, too).   Then see what the next one does.  If it's a full backup, see #D7 in Time Machine - Troubleshooting.

Maybe you are looking for