I dropped my iphone and when i picked it up it was working but as soon i got inside the house and turned it on, the screens lights up black then it goes completely white
he;lpp!! i dropped my iphone and face down on the screen andwhen i picked it up it was working and everything , when i got inside the house and checked it the screen goes black then it goes white and stays then shuts off and the same thing happens when you push the home button, plus im still able to recieve and get text messages i just cant see cause the screen.... help me like NOW !!!!!!!! haha i really dont wanna take it to a shop and pay money !!
You can try resetting it: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). If you are able to see the Apple, then the reset is in progress, and the Home screen will display shortly.
If you are not able to see the Apple, then you are going to need to make a trip to the Apple Store.
Cheers,
GB
Similar Messages
-
I installed the Dreamweaver trail 5 days , but my computer restored and now its gone and when i try to download it again it says that i have got it.. how do i re install the trail?
Run the cleaner tool and try again.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
The sound on my iPhone isn't working I don't understand why it was working fine an hour ago I haven't dropped it or anything simply just out it on silent... The music I was trying to listen to didn't want to make a sound when I turned it in , I put a pair of headphones in and and it worked as soon as I took it off it completely stopped the music was playing still I could see it in the top column that the play button was on ... Then I made a call an the same thing happened I turned it on speaker and then I could hear them... The sound is completely off even tho i looked at the seettings and put the volume on high noting is sounding on its own not even when i tap the buttons... I took it off the silent before I tried this stuff I don't understand please help !!!
make sure that your head phones are not attached to the phone then use the volume buttons on the side, if when using them you see a pic of headphones on the screen, then you have some lint in the headphone jack, use some compressed air and blow it out.
If you dont see that then try to reset the phone, hold down the home and power buttons for 20 seconds or untill you see the silver apple.
If you are still having a problem restore the phone and set up as new to see if that clears it up.
http://support.apple.com/kb/ht1414 -
Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes
Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead. -
Lately I've been importing photos from my iPhone to iPhoto and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens and I'm wondering if it's because I have a 5-year old Mac book or iPhoto is having issues. I'm not happy with disappearing photos especially after I've deleted them from my iphone after importing them to my macbook.
Has anyone experienced similar difficulties and what can I do?Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...
Hello s0ha1b
If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
I have an iphone 3g I tried to down load an app for netflix and it said I need to have ISO 5 but my phone has ISO 4.2.1 and when I try to update it on my computer through itunes I get message saying I have current version how or what can I do do to get an app the lets me watch netflix on my iphone 3g .Is there an sulision to my problem? I also tried another app with another name diff from netflix and I got the same message saying i need ISO 5 .Someone please help thank you
Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?
-
my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!
Hey jestinsinclairr,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694#10
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Have a nice day,
Mario -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/ -
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0
We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
i have iphone 5 and when i connect it to my Sony S series laptop it does,t show any conectivity and does,t charge the mobile. there is no topic in user mannual as well. anyone can help me please????
Make sure that it is connected to a USB 2.0 port and not a USB 1.1 as 1.1 will not provide power for connectivity.
Try it in a different USB port and see if it works -
Hi,
I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
Any ideas? Thanks in advance!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
I dropped my iphone 5,1 week later suddenly my phone was restarted. After that I cannot call or receive any messages. I followed all the steps that was sudgested but it is still not working. It cannot recognize my Sim card and when Sim card is in it, IMEI number doesn't shown in settings. I don't understand how it is not possible to repair it when I dropped from 1 meters and even I didn't broke the screen. So, what should I do dear Apple family?
Hello dilara8,
Welcome to the Apple Support Communities!
I understand that you are seeing multiple issues with your iPhone after a drop. It sounds as though your device may need to be evaluated for service. For more information on this process, please refer to the attached link.
iPhone Repair and Service - Apple Support
Best,
Joe
Maybe you are looking for
-
Here are scripts for getting OAS302 working on RedHat 6.0
People have said this doesn't work. It works. It's just the owsctl that doesn't work. I'm not saying that oas302 on RedHat 6 is the best solution anyone could come up with, but it does work, and if you want to do it, here are some scripts that you ca
-
How to use VMRC SDK to open VM console
Hi, I'm looking for some help to setup a custom solution that opens a console of a VM from a corporate intranet site. I'm new to the whole VMWare SDK world, but I've been able to easily use vCloud Suite SDK for .NET to expose some details on my User
-
TS4425 Cannot access Photo Stream on my Apple TV.
Updated over a week ago. Software 6.0. iCloud terms and conditions have changed it says yet it won't allow me to accept the new terms. Elsewhere it advises changing the region. Have tried that. It doesn't help. Please help.
-
Blank builder screens after upgrade to 4.2
Apologies in advance for another "blank screen" installation post. Scenario: upgrading from 4.1 to 4.2 on 11gR2 using AS 10.2 as my listener. After an apparently successful upgrade, all my upgraded applications look fine, but the builder login screen
-
After having made a short film I couldn't seem to export it properly. After every "Export to Quicktime" I would watch the copy I exported to my desktop before putting it on a DVD and every time the same problem occured. Here is the problem: The film