I get 'Failed to enlist global transaction with DTC'

Hi..
has anybody seen the message '[ODBC][Oracle]Failed to enlist global transaction with DTC' when using Oracle Service for MTS?
Server : Oracle 8.1.7.4 on Solaris 2.8
Client : - 8.1.7.4 Windows 2000 SP4
- ODBC : Oracle ODBC Driver 8.1.7.10
Application : COM+ with new transaction
i get the message sometimes, but not always, when conneting to oracle via odbc
any comments would be appreciated, thanks.

We used to get the same error with VB-6, MTS and Oracle 8.1.6. Although our environment was Win NT, our solution may work for you. (We got this solution via Metalink from a programmer in England.)
1) We stopped using Oracle Services for MTS and switched to Oracle's XA functionality. To activate XA functionality, please search the Microsoft web-site. (I don't have the specific URL at hand.)
2) You can use either the Microsoft ODBC driver or Oracle's, or OLEDB, depending on what your COM+ components are doing. Because 2 of our Packages returned REF_CURSORs to COM+, we had to use OLEDB. The Microsoft web site has information about this.
3) This solution stopped the "unable to enlist" errors and seemed to run faster than using Oracle Services for MTS.
Hope this helps,
CCV

Similar Messages

Oracle ODBC Failed to enlist global transaction with DTC

Hi Everyone,
I have installed a COM+ application on a Windows Server 2008 R2 x64 machine. Which is using Oracle Client version 11.1.7.0 (32 bit).
Application is using 11.1.7.0 (x64) Database running on another server with same OS. When I run some functionality in the application, I am getting a message saying
"The Error [Oracle][ODBC]Failed to enlist global transaction with DTC".
This error happened in a production environment. It is working on my test machine under same situation. The application is certified on above Oracle version.
Please let me know what can be cause of the problem.
Thanks & Regards,
Anil

I have the same problem with Oracle OLEDB provider also. Use
Microsoft drivers they work and faster...
Eddy

Global transaction problem with JDriver/Oracle and Oracle XA

We are haveing serious problems with Container Managed Transactions on Bea 6.1
and Oracle with EJB having set "Required" for all methods. We have tried in vain
to make it work with JDriver as well as OracleXAClient. Both fail at sometime
during the execution throwing "Not called in cotext of global transaction" (with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this one with oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData metaData = dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null, tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from global transaction.
Interesting thing is that with OracleXA, it doesnt say this exception at this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB, we used
direct jdbc connection and then did away with it. Now all next sql queries were
executed against oracle pool using XA data source with OracleXAClient. But at
some point we again ran into the problem "XAER_PROTO : Routine was invoked in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.

AFAIR this issue was resoved by moving tx opreations out from non-tx
methods.
Regards,
Slava
"Apurb Kumar" <[email protected]> wrote in message
news:[email protected]...
Jawad,
It would be nice if you can post the full stack trace error message. Didyou try moving to
the latest service pack (sp2) for WLS6.1.
Thanks,
Jawad Mahmood wrote:
Yes we had correctly set TXDataSource and let it to point to the right
connection
pool each time and it worked well with oracle thin driver but not whenwe switched
the pool to JDriver or OracleXAClient. Note that we could aways confirmthat pool
was successfully created alongwith we could retrieve connection from itvia TXDatSource,
things gave problem after we attempted to do what i had mentioned in mylast posting.
>>
Also with JBoss 2.4.4 things work pretty well. So couldnt be our codeproblem.
"Slava Imeshev" <[email protected]> wrote:
Jawad,
Did you set up TxDataSource?
Regards,
Slava Imeshev
"Jawad Mahmood" <[email protected]> wrote in message
news:[email protected]...
We are haveing serious problems with Container Managed Transactionson
Bea 6.1
and Oracle with EJB having set "Required" for all methods. We havetried
in vain
to make it work with JDriver as well as OracleXAClient. Both fail atsometime
during the execution throwing "Not called in cotext of global
transaction"
(with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this onewith
oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData _metaData =
_dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null,tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from globaltransaction.
Interesting thing is that with OracleXA, it doesnt say this exceptionat
this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB,we
used
direct jdbc connection and then did away with it. Now all next sqlqueries
were
executed against oracle pool using XA data source with
OracleXAClient.
But
at
some point we again ran into the problem "XAER_PROTO : Routine wasinvoked
in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.
Apurb Kumar

Mix Local and Global Transaction using XA Driver for Oracle

Hi all,
We are trying to use a XA Driver which can support both local as well as global
transaction. We tried using the Weblogic jDriver (XA Driver) type 2 that comes
along with Weblogic installation but unfortunaltely it cannot mix local as well
as global transaction.
Please let me know in case we have any XA JDBC driver for Oracle Database which
supports both local and global transaction together.
Thnx,
Kumar
Environment:
Weblogic 8.1 server
Database used : Oracle8i

Most database drivers can support local and global transactions, with some
restrictions.
The JDBC spec has been changed to require compliant drivers to let the
application
know if they try to start a global transaction while a local transaction has
not been
completed (or vice verse). So most of the database drivers have been
changed to enforce
this restriction (breaking a lot of code that is out there).
"Kumar Raman" <[email protected]> wrote in message
news:4033457c$[email protected]..
>
Hi all,
We are trying to use a XA Driver which can support both local as well asglobal
transaction. We tried using the Weblogic jDriver (XA Driver) type 2 thatcomes
along with Weblogic installation but unfortunaltely it cannot mix local aswell
as global transaction.
Please let me know in case we have any XA JDBC driver for Oracle Databasewhich
supports both local and global transaction together.
Thnx,
Kumar
Environment:
Weblogic 8.1 server
Database used : Oracle8i

Managed datasources, Global transactions and XA

I have a question regarding the use of managed datasources and global transactions with oc4j 10.1.3.
From the documentation at:
http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b14428/servdats.htm#CHDGJECC
I conclude that managed datasources by default support global transactions.
I have tested the following scenario:
A stateless session bean starts a container managed transaction. The bean updates data in two different databases through two different
managed datasources. The transaction is atomic.
What surprises me is that this works. I would think that I would need to configure the datasources to make use of XA.
Can someone explain why this works, wat is the difference between XA transactions and global transactions in this context?

Further to give more info the error users are facing is
Could not connect to 'oracle.jdbc.xa.client.OracleXADataSource'.

Get error from SQL AGENT: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024

I am running SQL Agent that executes an SSIS process from sql server1. The SSIS process executes its SQL/tables/sp’s against another sql server2.
I get an error after adding data flow tasks with transaction supported within a sequence with transaction required. The error, “The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction
manager has disabled its support for remote/network transactions"
Prior to adding this sequence everything was working from sql agent, and there were other sequences with oledb destinations.
Everything works when running within SSIS Package.
I see this article on similar issue,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0bfa2569-8849-4884-8f68-8edf98a9b4fe/problem-to-execute-a-package-and-tasks-with-a-certain-transactionoption-property-i-need-help?forum=sqlintegrationservices
“I had similar issue and solved by setting the following on both the machines. Allow Remote Clients, Allow Remote Administration,
Allow Inbound Clients, Allow Outbound Clients, and TIP are enabled in Component Services/My Computer/Properties/MSDTC/Security Configuration.”
I don’t want to remove transaction required for the “Remove Duplicates from Staging” sequence.
Anyone seen this?
Greg Hanson

DTC was running on remote computer. The problem was it was no longer accepting transactions from remote servers. This was in SSIS so I had to turn to "Transaction Supported" for all Data Flow Transactions.
Greg Hanson

Advise on using DBMS_XA with multiple branches under one global transaction

Dear all
I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
ORA-02051: another session or branch in same transaction failed or finalized
This is the structure of my programs (3 SQL*Plus sessions):
main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
m1.xa_start tmnoflags
m2.DML
m3.Wait for thread A + B to manually be started and run xa_end
m4.xa_end tmsuccess
m5.xa_prepare
m6.xa_commit false
thread A: Uses xid 123|A (branch A of global transaction 123)
a1.xa_start tmnoflags
a2.DML -- thread A can see main and thread B's data
a3.xa_end tmsuccess
a4.xa_prepare -- required?
a5.Should we also call xa_commit false?
thread B: Uses xid 123|B (branch B of global transaction 123)
b1.xa_start tmnoflags
b2.DML -- thread B can see main and thread A's data
b3.xa_end tmsuccess
b4.xa_prepare -- required?
b5.Should we also call xa_commit false?
The failing steps are:
m5
m6
a4
a5
b4
b5
Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
Thanks a lot in advance.
Cheers
Finn

OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
When called from a job, xa_start throws:
ORA-24789: start not allowed in recursive call
on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
ORA-25352: no current transaction
so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
Thanks in advance.
Cheers
Finn

SQL operations are not allowed with no global transaction by default for X

Hi All,
I am getting the above mentioned error.
java.sql.SQLException: SQL operations are not allowed with no global transaction by default for XA drivers. If the XA driver supports performing SQL operations with no global transaction, explicitly allow it by setting "SupportsLocalTransaction" JDBC connection pool property to true. In this case, a
lso remember to complete the local transaction before using the connection again for global transaction, else a XAER_OUTSIDE XAException may result. To complete a local transaction, you can either set auto commit to true or call Connection.commit() or Connection.rollback().
I am developing a web application. I have jsp, servlets, JDBC classes.
I am using DataSource and Connection pools.
I am on WLS 8.1 sp3 and Oracle 10.1.
Part of My Config file looks as follows:
<JDBCConnectionPool DriverName="weblogic.jdbcx.oracle.OracleDataSource" KeepLogicalConnOpenOnRelease="true" KeepXAConnTillTxComplete="false" Name="AUMDataSource" NeedTxCtxOnClose="false" NewXAConnForCommit="false" Password="{3DES}AKRkWgdzXN8WrXSRtSvJ6g==" Properties="user=pibsrmgr;portNumber=1521;SID=pibsrdod;serverName=pibsrdod.dtu.mlam.ml.com" RollbackLocalTxUponConnClose="true" SupportsLocalTransaction="false" Targets="myserver" TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:bea:oracle://pibsrdod.dtu.mlam.ml.com:1521" XAEndOnlyOnce="false" />
<JDBCTxDataSource EnableTwoPhaseCommit="true" JNDIName="jdbc/AUMDataSource" Name="AUMDataSource" PoolName="AUMDataSource" Targets="myserver" />
Any help will be appreciated.
Thanks
---Radhe

Hi,
Regarding Transactions , the following link can helpful to you .
Regards,
Prasanna Yalam

SAP job SAP_COLLECTOR_FOR_PERFMONITOR getting failed with abap dump LOAD_PROGRAM_NOT_FOUND

Dear Experts,
Background job SAP_COLLECTOR_FOR_PERFMONITOR getting failed with abap dump LOAD_PROGRAM_NOT_FOUND.
As it is hourly scheduled job and it gets finished 22 times in a day but other 2 times fails with abap dump.
Finished Job log
Job started
Step 001 started (program RSCOLL00, variant , user ID Bharath)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV                       on server
Clean_Plan:Cleaning up jobs of system DEV
Clean_Plan:finished
Job finished
Failed Job Log
Job started
Step 001 started (program RSCOLL00, variant , user ID Bharath)
Internal session terminated with a runtime error (see ST22).
Kindly suggest on this..
Thanks,
Bharath.

Dear Divyanshu,
Our system in ERP 6.0 EHP5 with SP level 10. The ABAP Dump shows below error.
|Short text                                                                                        |
|    Program "RSORA811" not found.                                                                 |
|What happened?                                                                                    |
|    There are several possibilities:                                                              |
|                                                                                                  |
|    Error in the ABAP Application Program                                                         |
|                                                                                                  |
|    The current ABAP program "RSCOLL00" had to be terminated because it has                       |
|    come across a statement that unfortunately cannot be executed.                                |
|    or                                                                                            |
|    Error in the SAP kernel.                                                                      |
|                                                                                                  |
|    The current ABAP "RSCOLL00" program had to be terminated because the                          |
|    ABAP processor detected an internal system error.                                             |
|What can you do?                                                                                  |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                                  |
|                                                                                                  |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                                  |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                    |
|    On account of a branch in the program                                                         |
|    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)                                              |
|    or a transaction call, another ABAP/4 program                                                 |
|    is to be loaded, namely "RSORA811".                                                           |
|                                                                                                  |
|    However, program "RSORA811" does not exist in the library.                                    |
|                                                                                                  |
|    Possible reasons:                                                                             |
|    a) Wrong program name specified in an external PERFORM or                                     |
|       SUBMIT or, when defining a new transaction, a new                                          |
|       dialog module or a new function module.                                                    |
|    b) Transport error                                                                            |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "RSCOLL00" - in                                      |
|     "LOOP_AT_SYSTEMS_AND_REPORTS".                                                               |
|    The main program was "RSCOLL00 ".                                                             |
|                                                                                                  |
|    In the source code you have the termination point in line 535                                 |
|    of the (Include) program "RSCOLL00".                                                          |
|    The program "RSCOLL00" was started as a background job.                                       |
|    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"                                               |
|    Job Initiator.. " bharath"                                                                       |
|    Job Number..... 18243400
Kindly check and suggest..
Thanks,
Bharath.

How to get the Global Transaction ID

Hi
I have a Session Bean in which I am starting a UserTransaction. Inside the Session Bean I am calling an Entity Bean and I have set the Transaction attribute as RequiresNew. I need to get the Global Transaction ID inside the Entity Bean. How do I get it.
I tried with the below line of code:
weblogic.transaction.TransactionHelper txHelper = TransactionHelper.getTransactionHelper();
weblogic.transaction.Transaction tx = (weblogic.transaction.Transaction)txHelper.getTransaction();
javax.transaction.xa.Xid xid = tx.getXID();
xid.getGlobalTransactionId();
The GlobalTransactionId is not same in the Session Bean and the Entity Bean.
Please help me on this.
Thanks in Advance
Sundari

hi ,
get the data for the user from db tables usr02 usr41..
regards,
venkat.

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28     Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0xC0024107
Source: Checking Alcon Files      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advance

Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all.

Analytical Services failed to get user's parent group tree with Error

Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Is it possible to get an event, if user end transaction with /n?

Hello,
i have written an own control component(combination from enjoy controls(Toolbar, Tree and Splitter) in ABAP. If the User end the transaction with the gui status BACK END or CANCEL, I got a PAI and can say save_layout( ) set screen 0 leave screen, that next time the control has the same layout. If the user leaves the transaction with /n, I get no PAI to save the layout. If there are any event that I can catch to save the layout of my control. I find the class cl_system_transaction_state with event transaction_finished, but this event is only raised by commit work or rollback work.
Thanks & Regards

Hello,
There is no event triggered on a "/n".
Users should know that "/n" leave the transaction brutaly without any confirmation
Sorry
Regards
JM

I get 'Failed to enlist global transaction with DTC'

Similar Messages

Maybe you are looking for