I got a message "the settings were not saved for the iPod "Jenny's iPod" because it could not be found. But I named my iPod "Jenny's iPod". What should I do?

What should I do to connect to my iPod?

- Are you updating clicking on the update button in iTunes?
Try a reset. Nothing is lost.
- Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try deleting file and try again. It is located:
IPSW file location for Mac and Windows

Similar Messages

Settings NOT saved for the iPod, because- not found

I've a lot of regular changes to make when updating my music library on my iPod. But when I'm in the middle of doing so - that is using TAB "Music" (which "Sync Music" enabled) - and checking all relevant playlists, an error appears:
"The settings were not saved for the iPod “<my iPod name>” because it could not be found."
I don't know what to do because the only related articles all dates back to… 2007! That's 5 years ago!!!
Of course I tried all the solutions of 2007, and when I do other errors occur like:
"iPod sync failed" OR… my iPod simple disappears from the list (and even DEVICES doesn't shows up anymore in the left pane).
THANKS for helping me.

Can you post a link to the article you are referring to?
I assume you have tried using a nother USB sync cable to help rule out the possibility of a faulty one? What about plugging the iPod into a different USB port on your Mac?
It might help to remove any other USB devices you have connected to the Mac. Then reboot the Mac as well as your iPod by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. Then try to resync.
Could you provide the full text from the error messages you are referring to?
Make sure you are running the latest version of iTunes (10.6.3).
B-rock

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room.

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

Hello Lcw2610,
I would recommend deleting the affected movie from your iPad, and redownloading the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
If the issue persists, please do report the issue to the folks in our iTunes Store.
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

I wanted to tell that the forums were working well again. And then I saw that I could not enter text in the body again with Windows Chrome.

After long waiting and clicking I succeeded to reach this body.
Now I understand why there is so few traffic the last days.
Success
Cor

After long waiting and clicking I succeeded to reach this body.
Did you try to find any more details to refine your symptom description? E.g. this sounds like it might be a variation of the one where in IE we see no Edit toolbar but apparently in that case we could treat it like an HTML source edit pane and
then Submit that. I only see those very sporadically. Another possibility suggested by this description ("could not enter text in the body") would be to turn off CSS. I don't know how you would do that using Chrome but in IE you could
use View, Styles, No Style (Alt-V y N ).
FWIW for me the biggest problem that I had in the last few days was related to DNS. I don't know what was going on but in some cases I had to resort to using nslookup's second operand to request a lookup from Google's DNS server (e.g. 8.8.8.8) and
then try to work with the IP address that that returned. I was mostly on Answers where that happened though.
Robert Aldwinckle
Robert,
I'm just an average user, not as knowledged as you. I thought these forums were for persons like me.
Success
Cor

Receive message when downloading ITunes or Safari for Windows 7 64 Bit. "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."

Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package".

I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.

How do I avoid the dreaded "jaggies" when saving for the Web?

I created vector art in Illustrator, then saved the file as an .ai file.
Afterward, I chose "Save for Web," and exported the file as a .png file.
I placed the .png file at 100 percent into a Dreamweaver file.
The result is a file with jagged edges. How do I save the file to preserve the smooth vector look of the original file?
Thanks

Thanks, I followed your lead and changed the optimation to "Type," but I am still getting the jaggies:

I restored my ipod, when I went to put everything back on it, I got a message that said, "an error writing to the device, can not sinc. Then it said the required disc can not be found. Now what do I do, I have all of this music and apps that I can't get

Before I restored my ipod, I backed it up then I updated and restored. The problem is when I went to put everything back on it, I got a message saying that an error writing to the device, can not sync. Then another message appeared saying that "the required disc can not be found. Now what do I do?

Try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Also, delet the iPod Phot Cache folder for the second error. For its loation see:
iTunes: Photo sync creates iPod Photo Cache folder

All the pictures in my document all of the sudden disappear and I got a message saying images were deleted. A box is left in place of each picture.

all the pictures in my document all of the sudden disappear and I got a message saying images were deleted. A box is left in place of each picture.

I did it. By relocated all the songs. Then did my usual sync. Now , all the songs were synced to my Iphone now.:)

Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
Is was working this morning!

Depends on your operating system
Go to google, try typing in
Change permissions Windows
or
Change permissions Mac

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

I get an error message "the following files were not imported because they could not be read (266)..

I get an error message "the following files were not imprted because they could not be read (266) on Lightroom 4 on my desktop.
No problems importing the files onto my laptop. Using a SANDISK card reader and card. What's going on on the desktop?

Leanne, check the write pernissions on the folder/drive you are attempting to import into on your desktop. The message usually means "cannot be written" - a not so clear message.

Lost my i touch and do not know what the settings were for tracking

I lost my gifted i Touch and do not know what the settings were for tracking. Can I still get help to locate it?

If you set up the Find My iPod service prior to the iPod going missing, then there is a chance that can be tracked, though it depends on a number of factors (the iPod is turned on, connected to a WiFi network, and has not had the Find My iPod service disabled). Just log into iCloud.com and go to the Find My iPhone section. If you did not set up Find My iPod, then there is no way to track it.
Contact the police, give them any location information you get from Find My iPhone if you set it up and it returns a location, and notify your cell service provider. You should also immediately change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance).
Regards.

I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
If that sends a message, please note the exact wording.

I got a message "the settings were not saved for the iPod "Jenny's iPod" because it could not be found. But I named my iPod "Jenny's iPod". What should I do?

Similar Messages

Maybe you are looking for