I got some hair spray on my new retina display screen. What is the best way to remove.

I got some hair spray on my new Mac Book Pro Retina Display. Any thoughts on the best way to remove?

I would use this. I use it on my MBPs and it does an excellent job. I cannot say with authority that it will remove your hair spay residue.
Ciao.
http://www.soap.com/p/windex-for-electronics-aerosol-97299?site=CA&utm_source=Go ogle&utm_medium=cpc_S&utm_term=ASJ-294&utm_campaign=GoogleAW&CAWELAID=1323111033 &utm_content=pla&adtype=pla&cagpspn=pla&noappbanner=true
I clicked the reply button too early.
Message was edited by: OGELTHORPE

Similar Messages

Got new macbook pro. What is the best way to transfer my itunes from my old pc to my new mac? I want to be able to plug my iphones and ipad in to new mac and have redo anything

Got new macbook pro. What is the best way to transfer my itunes from my old pc to my new mac? I want to be able to plug my iphones and ipad in to new mac and have redo anything

See Here... This should transfer everything...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

HT5922 I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

Bonjour,
I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

In article <e35sc3$ru1$[email protected]>,
"-->dan mode" <[email protected]> wrote:
> > All
> > I have a website I would like to remove from the
internet, However I am
> > planning on keeping the IP for a development
location and would like to
> > put
> > a page up that says this site is no longer
available. Is this how you do
> > it
> > or are there other pages to display when a site is
removed.
> > Thanks
> > Dave
Depending on how long the site has been active, it may be
already
spidered by search engines and cached. However, for the most
part, I
usually use my FTP program OR even Dreamweaver itself (now
that I can)
to delete files on the server just as I do locally. Hit the
delete and
confirm

With all of the big changes that have gone on with Lion, surely it would have made sense for Apple to have provided how the new commands work? What is the best way to learn about how things have changed?

Apple has tended in my expereince to provide intuitive software that users can grow to use and admire. Why then does Lion go off at a tangent and become unintuitive and just plain hard work to work out? I run a business and this has caused a lot of time consuming effort particularly when working out how to save files (in certain programs). Like so many products (iPhone being one), there is no guide to the great things that can be done and I just don't have the time to go fishing around online looking for tips and tricks when I've got clients who need things quickly.
Where is the best place to learn about Mac things?

Take a look here: http://www.apple.com/macosx/whats-new/

Late 2011 MB Pro runs SLOW. How can I clean up the junk w/o losing key sw? Buying a new MB pro soon, what's the best way to bring data but leave sluggish performance?

Report from EtreCheck here:
EtreCheck version: 1.9.11 (43) - report generated May 29, 2014 at 9:53:52 AM PDT
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.3 (13D65) - Uptime: 1 day 17:46:44
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (477.03 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. iPad
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.novatelwireless.driver.3G (3.0.2) Support
          [not loaded] com.novatelwireless.driver.3GData (3.0.2) Support
          [not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
          [not loaded] com.sierrawireless.driver.SierraSupport (1.4.11) Support
          [not loaded] com.sierrawireless.driver.SierraSwitch (1.2.2) Support
          [not loaded] com.sierrawireless.driver.SierraSwitchKicker (1.0.0) Support
          [kext loaded] com.silex.driver.sxuptp (1.5.1) Support
          [not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) Support
          [not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) Support
          [not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) Support
Startup Items:
          PKard: Path: /Library/StartupItems/PKard
          ProTec6b: Path: /Library/StartupItems/ProTec6b
Problem System Launch Daemons:
          [failed] com.apple.AOSNotificationOSX.plist
          [failed] com.apple.installd.plist
          [failed] com.apple.softwareupdated.plist
          [failed] com.apple.wdhelper.plist
          [running] com.seagate.TBDecorator.plist Support
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [running] com.distortedvista.istatmenusprocessserver.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.prey.agent.plist Support
          [running] com.wdc.SmartwareDriveService.plist Support
          [running] com.wdc.WDSmartWareService.plist Support
          [running] Nalpeirond6b.plist Support
Launch Agents:
          [running] com.Affinegy.InstaLANa.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.gopro.stereomodestatus.plist Support
          [loaded] com.hp.messagecenter.launcher.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.thursby.pkard.tokendagent.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [running] com.google.Chrome.framework.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          Quıcĸsıɩⅴεʀ
          AirPort Base Station Agent
          Dropbox
          WDDriveUtilityHelper
          WDSecurityHelper
          RescueTime
          Dashlane
          WDDriveUtilityHelper
          Fantastical
          Box Sync
          WDQuickView
Internet Plug-ins:
          PMCADownloader: Version: 1.2.1998.896 - SDK 10.5 Support
          o1dbrowserplugin: Version: 5.4.1.18709 Support
          OVSHelper: Version: 1.0 Support
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
          OfficeLiveBrowserPlugin: Version: 12.3.4 Support
          AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          DivXBrowserPlugin: Version: 2.1 Support
          Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
          iPhotoPhotocast: Version: 7.0
          googletalkbrowserplugin: Version: 5.4.1.18709 Support
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
Safari Extensions:
          B4G_Safari: Version: 1.0
          Evernote Web Clipper: Version: 6.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Move-Media-Player: Version: npmnqmp 071101000050 Support
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
          Unity Player: Version: UnityPlayer version 1.6.2 Support
          Unity Web Player: Version: UnityPlayer version 2.0.2f2 Support
          WebEx64: Version: 1.0 - SDK 10.6 Support
          RealPlayer Plugin: Version: Unknown
3rd Party Preference Panes:
          Cineform Support
          DivX Support
          EarthDesk Support
          Flash Player Support
          Flip4Mac WMV Support
          Growl Support
          iStat menus Support
          Paragon NTFS for Mac ® OS X Support
          SANE Support
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 253.57 GB
          Destinations:
                    Reed Backup [Local] (Last used)
                    Total size: 2
                    Total number of backups: 14
                    Oldest backup: 2014-04-30 03:12:47 +0000
                    Last backup: 2014-05-28 23:48:29 +0000
                    Size of backup disk: Adequate
                              Backup size 2 > (Disk used 253.57 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               4%          Activity Monitor
               3%          WindowServer
               1%          Box Sync Monitor
               1%          Dropbox
               1%          sysmond
Top Processes by Memory:
          418 MB          iTunes
          147 MB          Google Chrome
          70 MB          Spotify
          45 MB          WindowServer
          41 MB          Dashlane
Virtual Memory Information:
          26 MB          Free RAM
          953 MB          Active RAM
          932 MB          Inactive RAM
          1.10 GB          Wired RAM
          27.07 GB          Page-ins
          587 MB          Page-outs

You have a boatload of things that you can get rid of!
Kernel Extensions:
          [not loaded] com.novatelwireless.driver.3G (3.0.2) Support
          [not loaded] com.novatelwireless.driver.3GData (3.0.2) Support
          [not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
          [not loaded] com.sierrawireless.driver.SierraSupport (1.4.11) Support
          [not loaded] com.sierrawireless.driver.SierraSwitch (1.2.2) Support
          [not loaded] com.sierrawireless.driver.SierraSwitchKicker (1.0.0) Support
          [kext loaded] com.silex.driver.sxuptp (1.5.1) Support
          [not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) Support
          [not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) Support
          [not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) Support
Startup Items:
          PKard: Path: /Library/StartupItems/PKard
          ProTec6b: Path: /Library/StartupItems/ProTec6b
Problem System Launch Daemons:
          [running] com.seagate.TBDecorator.plist Support
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.google.keystone.daemon.plist Support
          [running] com.prey.agent.plist Support
          [running] com.wdc.SmartwareDriveService.plist Support
          [running] com.wdc.WDSmartWareService.plist Support
          [running] Nalpeirond6b.plist Support
Launch Agents:
          [running] com.Affinegy.InstaLANa.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.gopro.stereomodestatus.plist Support
          [loaded] com.hp.messagecenter.launcher.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.thursby.pkard.tokendagent.plist Support
You may need the "gopro" agent if you've a "GoPro" camera, and you may need the "sierrawireless" and "novatelwireless" if you use a Sierra Wireless device of some sort and if you actually need the novatel drivers, but I think that you can safely get rid of the Seagate drivers (unless you need them for some sort of NAS???) and the other stuff.
Give a call back and tell us what you actually have and actually need. Most of it just looks like junk!
Clinton
EDIT: And you definitely need to uninstall ANY SmithMicro software!!!
Message was edited by: clintonfrombirmingham

(New to C# here) What is the best way to return false in a function if it cannot be executed successfully?

In Javascript or PHP you can have a function that could return, for example, a string in case of success and false in case of failure.
I've noticed (in the few days I've been learning C#) that you need to define a type of value that the function will return, so you need to return that type of value but in case of failure you can't return false.
What is the best way to achieve this behavior and is there an example I can see?
Thank you in advance,
Juan

Juan, be aware that returning null won't work with value types, such as an int, which can't be null. You'd have to use a nullable value type. A nullable int would be declared with a "?", such as:
int? someOtherFunction(int param)
if(something goes great)
return param * 42;
return null;
And you have to use it like this:
int? result = someOtherFunction(666);
if (result != null) // you can also use result.HasValue
// it worked, do something with the result
// if you're doing math with the result, no problem
int x = result * 2;
// but if you're assigning it to another an int, you need to use this syntax
int y = result.Value;
Before nullable value types came along, for a method that returned an int, I'd use a value of something that wouldn't normally be returned by that method to indicate failure, such as a -1.
~~Bonnie DeWitt [C# MVP]
That's something very very important to keep in mind. Can save you from a lot of headaches!
So if you have an int function and it might return NULL, if you are doing Math with the return value you can use it directly, but if you're assigning it to another variable you have to use .Value?
Thanks

What's the best way to handle new versions of software?

So we have an Application setup for Adobe Reader (just using Reader as a general example) which is part of our Task Sequence. When Adobe releases a new version of Reader, what's the best way to handle getting the new version into our SCCM setup.
I know I can create a new application and do it all over and select the new file, but can I simply replace the files that the application is pointing to and then somehow tell it to update the DPs with the new files? I'd rather not have to create new
applications every time if I don't have to.
Thanks.

I think continue the way you are doing right now by creating a new application each time there is a version change. Its a clean way to do and this helps with Application life cycle mgmt aswell where you keep track of versions across the environments and
eventually retire an application. Specially where no changes are made without a change control. This is completely process specific and may not be applicable.
i do agree with above posted comments about using supercedence option.
However most of the apps comes with upgrade capabilities from previous versions. So you can upgrade existing version with new one if you do not wish to use supercedence.
Thanks

I recently purchased a new laptop and have some music on it that I would like to add to my iphone. And vice versa so I can sync them. What is the best way?

I recently purchased a new laptop and have some music on it that I would like to add to my iphone. And vice versa so I can sync them. What is the best way?

iDevices are not backup devices.
Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer, then sync the device to the computer.
Attempts to sync the device to the new computer will remove all content from the device and replace it with content from the new computer/library.

Just got a New Mini and Want to set it up from the old mini what is the best way

What is the best way to set up my new mini? from an Old mini

You can also connect the two via FireWire and boot the old one in Target Disk Mode.
An ethernet connection also works. A wifi connection is very slow
OS X: How to migrate data from another Mac using Mavericks

I have an old 30" apple cinema display (2005) I want to use as a 2nd monitor to a new iMac (2012). I don't just want mirror image of iMac; what's the best way to do this?

I have not bought the iMac yet but will do so very soon and just want to make sure I have what I need to get everything setup including adding the old faithful 2005 30" cinema display. Currently I am driving the old 30" cinema display with a macbook pro also purchased 2005 and happy to say I got a lot of good miles out of this rig. What's the best way to connect the old 30" monitor as a second display for the new generation iMacs?
Other Questions
I can find online new in unopened box a 2012 iMac 27" i7 with 1T Fusion Drive for $1899 no sales tax. This seems like a pretty good deal since I notice the same is available from Apple refurbished for $100 more plus sales tax. I know that they say the Fusion drive is a lot faster on 2013 models but some of the speed tests I reviewed online showed the 2012 i7 and 2013 i7 very close on speed for both storage and processing. Any thoughts?
I don't like changing batteries so I would buy a separate Apple keyboard with numeric pad since it only comes with wireless keyboard. I'm a trackpad enthusiast having been using my macbook pro trackpad with current set up; and I am prepared to buy the Apple trackpad and replace batteries every 2 months but I would greatly prefer USB connection and rechargeable trackpact. I know Logitech makes one so if anyone is using and knows how it compares to Apple's I'm all ears.

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

What's the best way to set up new imac for logic etc?

In brief:
Getting new imac (27", 3.4 i7, 8-16GB ram, 1TB HD). Will be using it mainly to run Logic Studio (loads of plugins) and Final Cut Express. I also have 2 external Hard drives one 500G one 1TB.
The last imac I bought was my first and just went ahead and threw everything at it not really knowing where things should go. This time I want to set things up correctly.
Basically, with what I've got, what is the best way to set things up. I.e where do I put logic files, samples, BFD2, Amplitube etc. Where do I put videos for use in FCE. Storing projects and backups for use with Time Machine.
Also noticed the new imac will only have 1 firewire port. I will need to plug in the Hard drives (daisy chained), camera and RME Fireface 800. Was thinking of getting a Thunderbolt Hard drive but they are expensive and hard to find.
Would really appreciate any help before I get the new machine and start messing things up again.
Thanks.

Adding to babowa, enable the system firewall in System Preferences>Security>Firewall tab. Click Advanced and check Stealth Mode.
Lion is a pretty steady and secure operating system, and as there really aren't MANY Mac viruses, there ARE viruses out there still. OS X is pretty good about letting you know if you do accidently download a virus, and it will help you throw it away if it detects one, such as the MACDefender virus. OS X has built in security features such as sandboxing that doesn't allow viruses in as easily as a Windows PC. As for hackers, as long as you have the firewall enabled and a secure password (for your computer and email accounts), then you should be fine.
It's the user that lets the virus in, not the computer (unless there's some untold serious vulnerability in OS X, which is highly unlikely). Keep your apps up to date, don't download pirated software, and be street smart on the internet. Don't download things or visit websites that you don't think are real. Safari includes a Phishing feature that automatically detects known phishing sites, protecting you from that big problem. Keep your passwords secure and you should be fine.
There are antivirus solutions out there, one notable one available in the AppStore is Intego's VirusBarrier (free and plus versions), if you feel you still need one.
I wouldn't worry about it. Windows users who switch to Mac are always asking these questions.
Here's some good reading as well
http://www.apple.com/macosx/what-is/security.html
Enjoy OS X Lion

What is the best way to set up my new Mac Pro?

Not wanting to screw up in a process I've not done with a brand new machine before, I'm looking for feedback on my plan for setting my new Mac Pro next week...
The physical plan is this:
For RAM, I have four 2GB SDRAM's plus the supplied six 1GB modules. My plan here is to install the 2GB rams into the first four slots and install four of the 1GB modules into the remaining four slots for a total of 12GB's.
When the cost for 4GB modules gets down to reasonable, I'll buy four of them and bump the current rams down the line which will then give me a total of 24 gigs where I'll stay.
For my hard drives, I'm installing a 160GB Intel X25-M into the first drive bay
http://www.intel.com/design/flash/nand/mainstream/index.htm
using one of MaxUpgrades' 'MaxConnects' kits. I will use this drive for the operating system software and my applications and their libraries.
Next, into the remaining three drive bays, I am installing three 300GB WD Velociraptors. Mine are the pre-'backplane ready' versions:
http://www.wdc.com/en/products/products.asp?DriveID=459
so I have bought these sleds for them...
http://www.maxupgrades.com/istore/index.cfm?fuseaction=product.display&product_i d=180
I own one of Sonnet's Tempo SATA E4P cards
http://www.sonnettech.com/product/temposatae4p.html
which, thanks to this forum, I now understand, with the correct firmware installed, function well so I will install it and be able to establish hardware RAID. I will create a RAID 0 set with the three Velociraptors and use it to store all of my data files.
Backup will happen on a 1TB WD 'Caviar Black' external drive connected through one of the Sonnet card's external eSATA ports and using the OS 'Time Machine' software.
And that's the physical plan. My question is about setting things up. The physical installation part is straight forward and I don't expect any difficulties but I'm wondering what is the best way to install the operating system.
Do I take a first step keeping the supplied hard drive installed, install the solid state drive into the next drive bay and then transfer the contents from the supplied drive onto the SSD or do I do the complete physical installation process and do a 'C' drive start up and install the OS that way?
And, do you have any tips/suggestions on setting up the RAID 0 set?
thanks for the help. I want to do this right.
JQ

oh mighty Hatter, I knew you'd have helpful guidance to offer! And thank you. You've confirmed my anxieties about the Sonnet card; kind of a 'too much, too quickly' sort of thing. And it's not that Sonnet's not a good company. Just everything to do with new technologies and the growth curve we all, manufacturers and users, go through when they come out. And, for sure, the new Mac Pro's are new technology; the single biggest forward leap in Apple's top-of-the-line machines for some time far as I can tell. Just reading at Intel's website about the Nehalem's is a joy!
So, I will proceed now with everything except for the controller card, leaving that 'til later. In the meantime, I think I'll just happily run with the four hard drives all running independently. No software RAID. I know just those, the SSD boot drive plus Velociraptor trio's going inside of a 2.66ghz 8-core Nehalem Mac Pro is going to be a working pleasure. Heck, this way, I'll get settled in and used to the machine's speed, have a great time doing so and then, in however many months, I can jump into spending another chunk of money on an excellent RAID card, RAID card's dear Barefeats will have tested and reviewed for us, set up my RAID 0 set and head of to those new races watching my computer leap for joy! Could be that, by then, the cost of Intel 160GB X25-M's will have dropped enough that I can afford to go for a second and have a two SSD RAID 0 boot drive... Yummy!
Thanks for the help. Like I say, I knew there was useful guidance hanging on some limb within your personal kit, (otherwise referred to as your mind)!
Interesting to read about the problems people have had with Sonnet's 2.17 update in PPC's... In this computer, my PowerMac G5 dual 2.7ghz, I have a Sonnet 'Tempo Sata X4P' controller card. I downloaded and installed 2.17 and got the same troubles; no cut, no paste, no 'drag and drop' etc. It was miserable.
Mine, fortunately, magically corrected after running the 'permissions verify and correct' process in Disc Utility and, after a restart, all was back to almost normal but for one exception; the Sonnet card was no longer present or functioning including the four eSATA ports out the back. (I ran Tech Tools Pro 5's repair suites first but, and who knows why, it didn't correct the problem...) This one was absolutely in the 'who knows what the f_'s going on and why it disappeared but did' class.
Oh, the other remnant is that, when the computer goes into sleep, after about five minutes, the fans rev up, and up, and the computer's frozen; only access is to do a forced shutdown pressing and holding the power button, so I've had to adopt a 'shut down whenever leaving it for more than fifteen minutes' approach to this dear friend. Once I've fully moved into and established my new one (which should arrive today, by the way... Yippeee!!! Can't wait!), I'll do a complete restoration on this one including taking out the Sonnet card. Usually, I sell my old Pro's but, this time, I'm going to keep this one as a back up and just general second computer for times I might need it. It has been such a great and dependable machine. Keeping it seems the right thing to do.
thanks Hatter. I'll let you know how things go, including what happens with the SSD. I don't have speed test software so I won't be able to track it's performance like that guy in the post you gave me did...
JQ
ps- Gotta love that ILLogic fellow eh? Talk about not getting the essence!

I am new to macbook pro, what is the best tutorial video to watch

I am new to Macbook Pro, what is the best tutorial video to watch?

There are a lot of videos to watch if you are new to Mac. Apple has got a lot of tutorials and videos in their website > http://www.apple.com/support/macbasics They will help you use OS X.
Also, you can ask here. We will be glad to answer all your doubts about OS X and your MacBook Pro. Finally, welcome to the Mac

What is the best way to transfer my iphoto library from old imac to new imac. both have iphoto 9.2.1

What is the best way to transfer my iphoto library from current imac to my new imac. Both imacs have iphoto 9.2.1
os on old imac is 10.6.8. os on new imac is 10.7.2. I want the albums and events to stay intact. I have 4500 photos and 79 videos. 14.9 gb. looking for some advice here. Thanks so much.

Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

I got some hair spray on my new retina display screen. What is the best way to remove.

Similar Messages

Maybe you are looking for