I had a new ipod touch5 when I updated it to iOS 7.1.1 there is no facetime in the settings. What is wrong? Please help me find out and get the Facetime back.

I updated to ios 7.1.1 then eventually the facetime was gone

Have you updated it wirelessly or via iTunes? Have you an manual IPSW (firmware file) to update?
Had you FaceTime before?
It is maybe turned off in Settings --> General --> Restrictions?

Similar Messages

  • Find out and get the bit value for each pixel in image

    i use 16bit image. the image is 200x200 pixels. i need to know what is
    the bit value for each pixel. example(0111111011111101).
    where i can see the bit value output. if somebody got the example surce code please send it to me.coz i need the bit value to find out how many RGB color that use in the image. thanks for ur help.

    How many logins do you have???

  • HT5699 I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?

    Need help to get access to iTunes store. I bought an iTunes card bor buying on iTunes store.
    I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • When I open FaceTime my screen also shows contacts list how do I remove this and get full FaceTime screen to return?

    When I open FaceTime my screen also shows contacts list how do I remove this and get full FaceTime screen to return?

    When I open FaceTime my screen also shows contacts list how do I remove this and get full FaceTime screen to return?

  • When i update iphone4s's ios to ios6 through wifi,it showed that "an error occured".what to do?

    when i update iphone4s's ios to ios6 through wifi,it showed that "an error occured".what to do?

    yes i have, i tried restoring it, restarting it, even unplugging my atv2, waiting 30 seconds and plugging it back in...
    nothing...
    the weird thing is, is that my netflix works, music works and youtube.

  • I bought a gift card, but it hasn't shown up in my e-mail after 1 hour.  How can I find it and get the credit on my account?

    I bought an iTune gift card for myself and sent it to my e-mail address.  I have waited over an hour and the e-mail showing the gift card has not arrived.  How do I find it and get the credit put into my iTunes account so that I can buy some music?

    Oh hold on - sudden development!
    I panicked and force-shut down my computer because it froze after I clicked on the 'Reset Cache' option, then I logged back on and noticed the Cloud symbol next to the missing song. I clicked it, and it's finally downloaded properly! <3
    Mate, thank you so much for helping me out! xxx

  • I bought the HD season version of breaking bad, however I only need the regular @ 19.95. How can I change this and get the difference refunded?

    bought the HD season version of breaking bad, however I only need the regular @ 19.95. How can I change this and get the difference refunded?

    When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases."
    iTunes: Purchasing and viewing HD videos

  • Help to find out some of the object model for InDesign preference

    Hi All,
    I'm writing script to update the specific client preferences for each and every preferences of InDesign CS5. I couldn't find some of the object models in Extendscript help. If someone knows, please help to find out this.
    These are the list. Also refer screenshot.
    1. Dictionary Preference - Language English: USA
                                          Hyphenation
                                          Spelling
                                          Double Quotes 
                                          Single Quotes 
    2. Autocorrect Preference - Language English: USA
    3. File Handling Preference - Default Relink Folder
    Many thanks in advance.
    Peru.

    I looked and was not able to find a way to do this.

  • After I tried to update my Ipad mini, it kept saying hello in different languages on my lock screen and then when I slide across, it says connected to itunes but it's not doing anything!! Please help!!! And by the way it's plugged into the laptop to itune

    After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Can't reinstall os x - please help I'm desperate and at the end of my rope

    We have an iMac G5 running OS X 10.4
    all of a sudden it stopped working (when we tried to reformat a G3 ipod from PC to mac)
    so we restarted - it gave us the question mark
    restarted again, unplugged for 30 seconds, still question mark
    so we're reading all the support online, disk utility repair doesn't work - errors out
    so we go to reinstall from the install disks -
    but when it comes Select Destination Volume
    there is no volume!! I googled and found that someone said he "formatted the image" or something like that, but I have no idea what that means and couldn't find out how to do it in disk utility or anywhere else.
    any suggestions please? going crazy here.
    thanks in advance,
    k.

    k.,
    "how does one go about using a 3rd party utility to repair ..."
    You go out and buy a copy of DiskWarrior or Tech Tool Pro. Once you have it, insert the CD into the drive and reboot from the CD (hold down the c-key during boot). Then repair the disk and restart.
    "...or doing an archive&install?"
    1. Insert the Panther or Tiger install-DVD and reboot while holding down the c-key
    2. Once you are booted go to the menu and select disk utility
    3. Repair the disk and Repair permissions!
    4. Quit disk utility and proceed with the installation
    5. Under "options" select "Archive&Install" and check the box "keep user and network data".
    6. Install Tiger
    7. Restart
    8. Go to the folder Application/Utilities and run disk utility to repair permissions again.
    9. Download (or open if you downloaded before) and install the latest Combo update: Mac OS X Update 10.3.9 (Combo) or Mac OS X Update 10.4.8 Combo PPC.
    10. Restart and repair permisssions
    11. Go to the Apple menu and select "Software Update"
    12. Install all missing updates and restart.
    13. Repair permissions
    Good luck!
    If this answered your question please consider granting some stars: Why reward points?

  • Hi i have asked for this help before and it was fixed but cant remember how to do it My ipad has lost sound in certain apps and general typing i remember fixing it through the settings can any one please help it not the mute

    Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.

    You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Please Help!! How to get the width of the String for print out?

    Hi there,
    I need to do some printing in my application. I just want to know how can I get the width of the string when it is printed on the paper.
    I have tried to use the following code to get the width
    Rectangle2D rec = font.getStringBounds(str, new FontRenderContext(null, true, true));
    double width = rec.getWidth();
    however, the width I got from that function is not correct (the returned width is longer than the printed one)
    Does anyone know how to solve this problem?
    Thank you and Happy New Year !

    hi,
    The getFontMetrics(Font) is also defined in the Component class and therefore you can retrieve it even if you dont override the paint method.
    try the following (provided ur code extends some class that extends Component indirectly)
    FontMetrics f = this.getFontMetrics(this.getFont());
    int width = f.stringWidth(str); //str is the String for which u need to check the width.
    hope this was useful
    happy holidayz

  • Please help, why do i keep getting the white screen of death?

    ok i have a blackberry curve mobile, i dropped it in a pint of lager new years eve. i have left it to dry for months. first time i turned it on i was getting the white screen and it kept happning. so i tried updating the software and it worked fine for about 3 minutes. so i just left phone for a couple of weeks tried updating software again. last night it stayed on without turning off or having the white screen, but i get up in the morning to check my phone click it then the white screen appears again. making me very angry, because the white screen doesnt come on if i have my phone connected to USB to pc it stays on. anyone know why this is happning?

    Hi and Welcome to the Community!
    With moisture intrusion into a BB, the only thing that is predictable is that the results will be unpredictable. All of your symptoms could be perfectly understandable given the lager-bath your BB received. I'd recommend a new device ASAP (and get regular backups of your data, of course).
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to find out and locate the top 100 max elements from a 4D array

    I try to find out the 100 maximum elements in a 4D array and then I want to put the result in a 2D array, Which should show me the locations of the elements and the values of those elements
    ====================
    =Labview 7.0 & 8.0 & 8.5=
    =====================

    Hi,
    Don't know why you want a 2D array, this VI puts the results in a bundle.
    Just because it seems more practical to me (there's less room for
    mistakes)...
    The VI works as follows:
    The max value is returned, incl. it's index.
    Then it is replaced by the original minimum value, minus one.
    If the last found maximum is the (original) minimum, everything is skipped.
    If you really want a 2D array, instead of a bundle, replace the contant with
    an empty 2d array, the bundle with a build array, and the indicator with a
    2d array...
    Regards,
    Wiebe.
    "asd iyvjh" wrote in message
    news:50650000000800000017AC0000-1066448259000@exch​ange.ni.com...
    > I try to find out the 100 maximum elements in a 4D array and then I
    > want to put the result in a 2D ar
    ray, Which should show me the
    > locations of the elements and the values of those elements
    [Attachment Max 100 Values From 4D Array.vi, see below]
    Attachments:
    Max_100_Values_From_4D_Array.vi ‏45 KB

  • Using photoshop elements 13 but the option to crop a single image is grayed out and also the option to crop a scanned image into individual pictures is grayed out - any ideas?

    The option to crop an image is always grayed out or unavailable - both for single images and when I want to crop scanned images into individual pictures. Any idea what I may be doing wrong?

    Did you try using the crop tool to see if it is working?  See the tool I am talking about.
    I suspect you are in Guided Mode rather than in Quick Mode or Expert Mode.

Maybe you are looking for