I have 2 external drives connected to my new iMac. I can see but no one else can, the other can be seen but not written to.
I have 2 problems, i have 2 external drives connected to my new iMac.
Both are formatted to FAT 32, one I can see but no one else can and I can write to that drive,. The other can be seen by all but not written to by me or anyone else (This drive was used on PC but is FAT32 (have been back to the PC & told it to read write).
Permissions are correct on both that I can see. Thats the extent of my knowlege.Please help
Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other
Similar Messages
-
i want to format my external drive so that my new imac and my pc can read
Start by partitioning the drive as required for the Mac:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Now click on the Erase tab in the main menu, then select ExFAT from the Format Type dropdown menu. Click on the Erase button. This format is read/write on both the Mac and the PC. If you have a problem with it on the PC, then format the drive the same way using the Windows formatter. -
Hi there. I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id? Thanks in advance for your time and consideration!
Hi there. I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id? Thanks in advance for your time and consideration!
-
Greetings..my 15"MBP crashed. I pulled hard drive and have it available as "external drive"..with all info intact. I am currently using my 17"MBP, which has really been acting up in iTunes..many of my songs are showing the dreaded "exclaimation mark"..still don't understand how this occurs. BOTH computers are almost carbon copies of each other, so I just want to copy tunes from 15" hard drive to my 17" working computer, to try and rescue all these "lost" tunes. I've asked this before and always get several answers (for which I am grateful!)..but..they are always different.."You gotta get this library folder!..just drag and drop..erase and reinstall!.."...nothing has worked yet..I'm trying one more time. Mainly need to know which file/folder to drag to what location. Should be simple,.maybe you can help. There will be TON'S of duplicates (unless program catches this and asks if I want to import dupes!!)..so I am prepared to run "dupe-elimination" program. Thanks for your time and suggestions!
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library. -
I want to connect my iMac to my Time Capsule using Ethernet. I have them connected via an Ethernet cable, but only WiFi seems to be working. How can I specify the Ethernet connection instead of WiFi? Thanks
WelkedGo to preferences, network and see if ethernet is indicated. Be sure it shows a green dot. Also be sure it is at the top of the list (above WiFi). If not click on the the wheel at the bottom and set service order.
-
I have a 1TB Time capsule, I would like to attach a USB drive to the Time Capsule and transfer my iTunes Library to it so I can run itunes from wifi. I am new to network stuff. My current iTunes library is on a USB drive velcro'd to the back of my Macbook - rather inconvenient, the USB port is loose. The music files are external but the library files with ratings/play counts are in the iTunes folder. Advice please? Be gentle and assume I know nothing please!
Thanks
scottSetting it up the way you have with the library on the internal and just the media on the external makes it a lot more tricky to move things around. If it was all on the external you could do in the time it takes to copy the files plus about 20 seconds.
You can use the same library file, except in that file are references pointing to the media files on the USB drive. Are you planning on doing this with the same USB drive that you are using right now>? It is possible it may work. If the configuration is that you have SongA on USB drive Fred, as long as the drive remains named Fred then you should be able to move it to a different point of attachment. If you are planning on using a different USb drive you can try renaming the new USB drive to the exact same name as the existing one and maybe trick iTunes into not noticing the difference.
This is where having as much detail as possible when posting an issue is helpful so we don't have to consider every possible configuration. -
I live in NZ and just downloaded firefox which was successful because this other program i need to download requires firefox3 so when i clicked on this program to download now that i have firefox its not downloading so why is that.
Yes, you need the latest version of Flash to work with Mavericks and Safari 7.x. I'm not sure why you can't view some of the videos on YouTube but not all and I don't know which, YouTube or Safari, is suggesting a 10.xxxx version.
Can you copy and paste the specific URL of a video that you're having problems viewing? Then I could take a look on my end and see if I notice anything funny.
Call back...
Clinton -
my iMac has crashed...was told I need a new hard drive.....meantime I bought a mac mini.....I had an external drive connected to the mac....and was using time machine for backups....so....how do i move itunes music files to my new mac mini from the external drive?
Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source volume. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the access list. Give yourself read access if you don't already have it. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane. -
Best practices with external drives connected to Time Capsule?
I'm enjoying my new MBP but the storage limitations are a challenge with twenty+ years of data. I know it's not technically sanctioned by Apple but in another forum I found a discussion about successfully connecting an external drive to the Time Capsule. I tried this for a few months and had some problems, so I wonder if anyone here might have some insight into which of my drives would be best to use in this way and what, if anything, I must do to bless it for the task.
The drive most highly recommended in the forums at the time is the WD My Book. After buying it I learned that is Windows users install a package and update the driver for use with Time Machine, which Mac users are not able to do. The driver is available on the web but it's said to cause problems with Mountain Lion, which I can confirm. It's USB 3.0 and powered, though, which my two alternatives are not. It's also 2 TB and presently in two partitions. I also have a Seagate Free Agent GoFlex 500 which gets extremely hot with any use and an Iomega eGo Helium 500 I've been using for backups. Both are USB 2.0.
My goal is to put my iTunes Library and Time Capsule on the net (running 2.4 Ghz and 5 Ghz, averages 50Mbs). When I did this for a few months with the WD both its shares frequently dropped off my Desktop, as if powered down or something. Also there were the issues with Time Machine many others are having. Right now our video collection sits on the Time Capsule. Would it make sense to move our video to the WD and run iTunes and Time Machine on it? If so, do you have any tips for formatting, petitioning, or drivers (or anything else) to help this run smoothly? The WD works fine when hard-wired and the TC, too is fine without the WD at the party.
With apologies for the tome.kevlee64 wrote:
Thanks, but the drive is connected directly to the back of the Time Capsule by an ethernet cable.
Ah, that's a different colored horse.
You have a NAS (Network Attached Storage) drive, not a USB external drive connected to the USB port.
Many of those need software/firmware updates to work with Lion. Check with Iomega. -
Problem mapping USB external drive connected to Airport Extreme on my PC
I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2? -
Can I extend time capsule by adding external drive connected TC via USB?
Hi,
I use my TC drive for backups, i's now full. Can I extend time capsule backup drive by adding external drive connected TC via USB? If yes, how do I his? I have 1TB WD external drive connected via the TC's USB, I can see the WD drive in the finder and the TC set-up...but I don't know where to go from here...
Thanks for your help
SteveruWelcome to the discussions, Steveru!
I think what you are asking is can you simply continue Time Machine backups by adding the new USB drive, correct? The answer is not exactly. See below for details.
To use the new USB drive for Time Machine backups, you'll need to Open System Preferences (gear icon) on the dock and open Time Machine. Click on Select Disk and click your USB drive to highlight it, then click Use for Backup. Here's the rub....Time Machine will make a new full complete backup of everything on your Mac's hard drive. There's no way to avoid this. After that, it will continue to make scheduled incremental backups just like it did before on the Time Capsule.
If you ever need to go back to your original backups on the Time Capsule, you'll need to right-click the Time Capsule icon on the dock and choose Browse Other Time Machine Disks.
When the USB drive start to fill, you may decide that you no longer need all the old backups on the Time Capsule disk since you should have a good history of backups on the USB drive at that point.
So, you could erase the Time Capsule disk and then start backing up to the Time Capsule disk again. At that time, it will also make a complete backup on the first pass and then normal incremental backups from that point forward. When the TC begins to fill again, then you could erase the older backups on the USB drive and start backups again on that drive. Then switch to the other drive in the future to keep things going indefinitely. If you go with this type of flip flop plan, you should always have a solid history of many months of backups at any given time.
Will a plan like this work? I don't answer a question on the forum unless I've done it myself. This has been working well for me for almost 3 years.
Pondini, the resident expert on Time Machine and Time Capsule affairs, may have some comments on this as well. If you haven't already seen his excellent guide, Using Time Machine with a Time Capsule or +Time Machine FAQ+, these are the best available sources of information on this subject on the Internet.
Or, if you don't want to erase any your backups, you could of course keep adding a new USB drive when the current drive is about to fill. -
I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.
How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507
-
How do I configure my timecapsule to back up an external drive connected to macbook?
How do I configure my timecapsule to back up an external drive connected to macbook?
First, insure that the external drive has been formatted in Mac OS Extended Journaled
If it's not, and you already have data on the drive, you will need to move that data to another temporary storage location....as the format to Mac OS Extended (Journaled) will erase everything on the drive. Once the drive has been formatted, move the data from the temporary storage location back to the external drive
Click the Time Machine clock icon at the top of the screen
Click Time Machine Preferences
Click Options
Click the name of the external drive to highlight it, and then click the - (minus) button at the bottom of the list to remove the drive from the list of "excluded" items for backup
The drive will now be backed up by Time Machine on the next and all subsequent backups -
Log to Track External Drive Connections?
HI, we're just getting a Lion Server setup and running (Mac Mini). We mainly use it for file sharing off of one main external Thunderbolt RAID enclosure (Promise Pegasus R4 running RAID 5).
But we've noticed a couple intermittent issues with reading or viewing files off the main shared drive. It happened a couple different times and was notice by different clients that were connected. But it would usually clear up in a minute or so, not typically requiring us to re login to the server.
So we're wondering if the external RAID drive is temporarily disconnecting/reconnecting as this model (and possibly other Thunderbolt drives) is known to have intermittent connection errors. But we don't know if there's some sort of other connection issues between the clients and the server (running AFP). As it's random, it's hard to tell what is causing it.
- Is there a particular log file that would show whether an external drive was disconnected/reconnected at a particular time?
I looked through most of the logs in Server Admin or Server App, but didn't see anything obvious.
- If we find a log and can see that the drive is not disconnecting, any other main sources to check to see what may be causing the disruption? We were not making any changes to the server when the issues took place.
Thanks!You must set your FCP preferences to poin to that drive as Scratch disc. Check this tutorial and you'll find how to setup your scratch disc in System Settings topic:
http://www.kenstone.net/fcphomepage/settings_fcp_5balis.html
Wellcome to the forums !
Alberto -
How can I format or erase an external drive connected to a wireless router
I am working with a mac mini running OS X 10.7.4. The mini is connected to the internet via a linksys router. I have an external drive connected to the router. The router is listed under the shared list in Sidebar. If I select the router in the sidebar the external drive is displayed as a folder. Is there a way to have this external drive treated as a drive and not a folder? I would like to be able to erase/format the drive from my mini. I know that I can connect the external drive to the mini and perform the erase but I would like to know if there is a way to do it through the router.
thanks for the helpIt is not usually possible to do this with router connected
hard drives. Routers with this capability basically have
its own OS, usually some minimilistic form of Linux or
propriotary RTOS, that actually interface to the drives
and runs the file server. This in itself prevents any
"outsider" from formating the attached drives. Much in the
same way that you cannot use Disk Utility on one Mac
to format a network connected volume on another Mac.
Maybe you are looking for
-
Problem with Photoshop hangs/freezing for users on a terminal server
Dear Forum! I'm having some trouble with Photoshop freezing over a period of ~20 minutes when you (1.) user the eraser with special brushes and (2.) copy and paste material from a PDF to Photoshop. As you might notice by the size of this post i'm get
-
USB drive no longer works after system reinstallation
Recently I reinstalled the system (after 1 year of no uptades). One of my USB disks (strictly speaking it is a 2.5" disk in a USB enclosure) stopped to work. When I connect the USB cable the drive icon doesn't appear on the desktop. I attach the dmes
-
When I try to play games from websites like kontraband.com or albinoblacksheep.com a lot of the time they end up being bigger than the window so that I cannot see all of it. Is there a way to resize it or better yet make it fullscreen?
-
how to add images in jar file?
-
Annoying ZCM Patch Module error
Device Alias: ******* winxp-pro-sp3-x86 Device IP Address: 192.168.102.248 Error: [4/6/11 1:24:39 PM] Patch Module Duplicate name found in Anayze File: Adobe APSB11-06 Acrobat Professional Extended 9.4.3 for Windows (Update) (Multi-Language) (See Not