I have 3 systems with the same issue (BSDOD) Event ID 41
I have 3 systems with the same issue that 1 to 4 times a day it crashes. This is on a VM complex running Win2K8 SR2.
I say many Symbol search path issues and fixed that on the system that can see internet (others are behind BSO Firewall)
Now I am down to the last issue with this first server W2K8.
If anyone cal help me it would really make my day...............
************* Symbol Path validation summary **************
Response Time (ms) Location
OK
C:\Windows\Minidump
0: kd> !analyze -v
* Bugcheck Analysis
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa7f0ee7a410, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88000e0b9ec, address which referenced memory
Debugging Details:
READ_ADDRESS: fffffa7f0ee7a410
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910 mov rbx,qword ptr [rcx+10h]
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880021d8990 -- (.trap 0xfffff880021d8990)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa7f0ee7a400
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e0b9ec rsp=fffff880021d8b20 rbp=fffffa800cd199b8
r8=00000000000017e8 r9=00000000000000d0 r10=fffff80001603000
r11=0000000000000099 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
NETIO!FreeMatchBufListInternal+0x1c:
fffff880`00e0b9ec 488b5910 mov rbx,qword ptr [rcx+10h] ds:fffffa7f`0ee7a410=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80001678169 to fffff80001678bc0
STACK_TEXT:
fffff880`021d8848 fffff800`01678169 : 00000000`0000000a fffffa7f`0ee7a410 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`021d8850 fffff800`01676de0 : fffffa80`0d6cdc50 fffff880`010d8ba0 00000000`00000000 fffffa80`0ec7a170 : nt!KiBugCheckDispatch+0x69
fffff880`021d8990 fffff880`00e0b9ec : fffffa80`0f173cf0 fffffa80`0cd199b8 00000000`48706657 fffffa80`0cd199b8 : nt!KiPageFault+0x260
fffff880`021d8b20 fffff880`00e150f3 : fffffa80`0ec7a170 fffffa80`0cd199b8 00000000`00000011 fffffa80`0cd199b8 : NETIO!FreeMatchBufListInternal+0x1c
fffff880`021d8b50 fffff880`00e13f9d : fffffa80`0ec7a190 00000000`00000000 fffff880`021d8c30 fffff880`00e9273f : NETIO!FreeCacheEntry+0xa3
fffff880`021d8b90 fffff880`00e15176 : fffff880`021d8c30 00000000`00000000 fffffa80`0cd82660 fffffa80`0cd199b8 : NETIO!FreeSomeCacheBucketEntries+0x6d
fffff880`021d8be0 fffff880`00e1e221 : 00000000`0000000c fffffa80`0cd82660 fffffa80`0c020004 fffffa80`0cd82660 : NETIO!FreeSomeCacheEntries+0x36
fffff880`021d8c10 fffff880`00e073de : fffffa80`0f000003 fffffa80`0f173cf0 fffffa80`0cd82660 fffffa80`0f173cf0 : NETIO! ?? ::FNODOBFM::`string'+0x7a46
fffff880`021d8c50 fffff800`0196fc93 : 00000000`00000001 00000000`00000001 fffffa80`0f173cf0 fffffa80`0cd82660 : NETIO!TickWorker+0xe
fffff880`021d8c80 fffff800`01682261 : fffff800`0181e200 fffff800`0196fc01 fffffa80`0cd82600 fffff800`0181e2d8 : nt!IopProcessWorkItem+0x23
fffff880`021d8cb0 fffff800`0191473a : 498b4809`75c43b41 fffffa80`0cd82660 00000000`00000080 fffffa80`0cd78740 : nt!ExpWorkerThread+0x111
fffff880`021d8d40 fffff800`016698e6 : fffff880`0205d180 fffffa80`0cd82660 fffffa80`0cd83660 ffffff33`e9ed75cd : nt!PspSystemThreadStartup+0x5a
fffff880`021d8d80 00000000`00000000 : fffff880`021d9000 fffff880`021d3000 fffff880`021d89e0 00000000`00000000 : nt!KxStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910 mov rbx,qword ptr [rcx+10h]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: NETIO!FreeMatchBufListInternal+1c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5294760d
FAILURE_BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xd1_netio!freematchbuflistinternal+1c
FAILURE_ID_HASH: {4f4b2cba-a197-a425-b97a-8f7cbfbac87f}
Followup: MachineOwner
GWD
This does not surprise me at all. These were/are related to your Symantec. IMHO it is bloatware and after doing 10,000+ BSODS I have seem it more than any other malware app I would remove it and use MSE in its place
Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
http://www.microsoft.com/security_essentials/
For Norton 360 use this http://symantec.pcperformancetools.com/norton-360-how-to-uninstall.html
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\Minidump\102714-47923-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0165e000 PsLoadedModuleList = 0xfffff800`018a1890
Debug session time: Mon Oct 27 05:05:39.635 2014 (UTC - 4:00)
System Uptime: 1 days 4:50:11.507
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck C5, {8, 2, 1, fffff80001808147}
*** WARNING: Unable to verify timestamp for SYMEFA64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMEFA64.SYS ( SYMEFA64+27c5 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_CORRUPTED_EXPOOL (c5)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is
caused by drivers that have corrupted the system pool. Run the driver
verifier against any new (or suspect) drivers, and if that doesn't turn up
the culprit, then use gflags to enable special pool.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff80001808147, address which referenced memory
Debugging Details:
BUGCHECK_STR: 0xC5_2
CURRENT_IRQL: 2
FAULTING_IP:
nt!ExAllocatePoolWithTag+537
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
PROCESS_NAME: ccSvcHst.exe
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880069f9580 -- (.trap 0xfffff880069f9580)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800f880f60
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001808147 rsp=fffff880069f9710 rbp=0000000000001000
r8=0000000000000000 r9=fffff80001863770 r10=fffff80001863588
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!ExAllocatePoolWithTag+0x537:
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx ds:00000000`00000008=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016d3169 to fffff800016d3bc0
STACK_TEXT:
fffff880`069f9438 fffff800`016d3169 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`069f9440 fffff800`016d1de0 : fffff880`069f9690 fffffa80`0d157d80 fffff880`069f9500 fffff800`01863770 : nt!KiBugCheckDispatch+0x69
fffff880`069f9580 fffff800`01808147 : fffff8a0`078d3140 00000000`00000702 fffffa80`0f95c800 fffff8a0`078d33a8 : nt!KiPageFault+0x260
fffff880`069f9710 fffff880`016bf7c5 : fffff880`00000000 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 : nt!ExAllocatePoolWithTag+0x537
fffff880`069f9800 fffff880`00000000 : 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 : SYMEFA64+0x27c5
fffff880`069f9808 00000000`00000000 : fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 fffff880`016bf514 : 0xfffff880`00000000
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMEFA64+27c5
fffff880`016bf7c5 ?? ???
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: SYMEFA64+27c5
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMEFA64
IMAGE_NAME: SYMEFA64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 530fcaf7
FAILURE_BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xc5_2_symefa64+27c5
FAILURE_ID_HASH: {c40fe135-4c88-ce5c-c7b0-361d3927c5c6}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag
Similar Messages
-
this message appear when I launch any program within the CS3 suite
AMT subsystem failure. The licensing subsystem has failed catastrophically you must reinstall or call customer support. I call automated system which refers me to this site. I have reinstalled with the same issues not sure what else to do?Try this Help article
Error: "The licensing subsystem has failed catastrophically." when you start a Creative Suite 3.x application
Nancy O. -
Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?
There is another setting for "Start Conversation from", that needs to be set to phone number.
-
Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!
You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G. -
I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
== This happened ==
Every time Firefox opened
== I attempt to access a web front end on an IBM SVC deviceYou can't use the same certificate more than once.
See also [[Certificate contains the same serial number as another certificate]] -
I have 2 iphone with the same apple id. Now I want to use a different apple id for the iphones. How to do it? Help . Thank you!
Create a new Apple ID using a new valid e-mail address
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
In iPhone's Settings > Store > Apple ID > Sign Out and sign in the new. -
I have itunes 11 with iTunes Match on 2 Macs and 2 ios devices... I know it all has bugs... but I have been ok.
I am wondering how to show my library in the column browser view when I have multiple albums with the same names? I have noticed on my ipod in my car that an album titled "Christmas" plays and includes 2 different albums titled christmas... and in itunes it lists them both when not in the artwork view... (I primarily use the column browser to navigate my library.
Just wondering if anyone else has experienced this/knows how to fix.
Thanks!Various workarounds I can think of which basically involve playing around with tags. See which meets your needs or come up with others:
Give the albums slightly different names. For example, "Greatest Hits" [ABBA]"
Do the same but do it in the sort album field.
Add a bogus disc number to different albums. It may string them together still but at least they will be slightly grouped. -
Can we have multiple Podcasts with the same Mac Account?
Hi all,
Can we have multiple Podcasts with the same Mac Account?
For example, I have a single .MAC account and create a website with multiple Podcast pages...or within iWeb I create multiple sites, and each has a podcast.
Is there a problem?
Thks
LeoIts not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
Only after releasing the tr you can create a new tr on the same object.
Message was edited by:
Abhishek Jolly -
I have two iPhones with the same apple ID, can I change one?
I have two iphones with the same Apple ID. Can I cange one?
Settings > iTunes and App Store > Apple ID = Sign Out...
Then Sign In using the preferred Apple ID.
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
I can't update software because a message appears that I have to log with the same Apple ID that was used to purchase them: iMovie, Garage Band, iPhoto, but those apps came with OSX Lion.
How can I get the "original" Apple ID?Support Downloads
http://support.apple.com/downloads/
Luckily, there is always more than one way to update software. -
Can i have 2 iPhones with the same apple id?
can i have 2 iphones with the same apple id?
Will it created any problems...
if i download a paid apps on one of my iphone ,......will it be avaible on the second iphone (free)
what if i dont wanna sharge the apps & game, thanks..... -
I have an iphone 3gs, iTunes says my software version (4.2.1) is upto date, how to I get it to upgrade the version?
I have a friend with the same make/model who is on version 5...Doesn't sound like you have a 3GS, but rather an iPhone 3. Settings>General>About>Model...what does it say?
-
Can I have 2 iPhones with the same number??
Can I have 2 iPhones with the same number??
I have a fairly new 5S iPhone. I would like to add a "iPhone 6" when available. Can I get it WITH THE SAME PHONE # ?Dual NAM is a different animal - that means having tow phone numbers on the same phone. That's not allowed any longer, true.
The OP is asking about having the same number on two devices - and Elector gave a solution. Just move the SIM from phone to phone, depending on which one you want to use at any given time. You cannot use the same number on two devices simultaneously. -
what if i have two ipods with the same apple id? how do i find on that is missing?
If connected to the internet and yu turned FindMyiPd one, both will show up in FindMyiPhone
http://support.apple.com/kb/PH2580 -
My wife has a new 4s and quite often her phone speaker cuts out during a call and she has to put it on speakerphone. Telus tech support tells me this is a known issue yet there doesn't seem to be an update to the phone available in itunes yet. So far today we have talked to two other people who live in our area with the same phone and same issue. One went so far as to buy a jawbone for $150 to work around it not knowing it was a software issue. Is this a software fix or do we need to do a hardware swap? Is there a fix out or on the way?
My gf was having the same issues and also with a big echo every time I called her either from my 4S or even fron a land line as per other comments here. They told he to take it into the Apple store and they reset the software and now it's working fine.....so far.
Now today my bluetooth earpiece has decided to stop working for some unknown reason and then the last person that called me said my phone keep cutting out. I don't know whether that was because I had to turn off my bluetooth to answer the phone or what.
I suspect Apple will be sending out an update to fix some of these reported issues but in the meantime the local Apple store seems to be the only option. Just hoping I don't have to take that option as that would require a huge inconvenience for me as neither of the two stores in the Vanvouver area are remotely close to me.
Good luck.
Maybe you are looking for
-
Urgent I am getting System exception while executing a BAPI
I am developping an application in PDK(Abstract Portal Component). In that application I need to get access to BAPIs. But the problem is when I am executing BAPI I am getting SystemFaultException.
-
I'm currently designing a new website. It will be a very informative website (for dog owners in the city I live in), but it should also be fun and just useful. I already have two websites, done in iWeb, and I want this one to be even more professiona
-
Hi I have tried to upgrade my software on my phone. However after trying to re-boot, an error message is dsiplaying on my screen(blackberry screen). How can i restore my phone to work normally. I use a windows 8 laptop. please help me. Thanks you
-
I lost most of my bookmarks and now can only save a few
Yesterday, most of my bookmarks went away with only about 12 remaining. In addition to this, now I can only save 12 bookmarks.
-
When will Aperture have support for RAF files from the new Fuji XPro-1?
How long does it normally take to get the RAW file format updated? Fuji say they sent the file details to Apple many weeks ago. This is a camera being given fantastic reviews in all professional magazines worldwide - but I'm stuck with an Aperture fo