I have a 1st gen mac pro dual xeon nvidia geforce 7300, can i upgrade it?, I have a 1st gen mac pro dual xeon nvidia geforce 7300, can i upgrade it?
I have a Mac Pro 1st gen dual xeon 2Ghz with a Nvidia GE Force 7300 graphics card that i would like ti update to something newer and more performant. Can it be done?
mke52, is your MP an Intel machine? If so, you need to upgrade to Snow Leopard.
If not, 10.5.8 is the best you can do.
If you have Mactracker, it will give you all the upgrade combos for your model as sell as info on all Macs.
Its pretty interesting (and free)
www.mactracker.ca
Similar Messages
-
It is safe to say that i need help..................
let me start at the beginning.
I have 1 2008 imac. always a pleasure never been a problem. Attached to it i have an iomega 500gb ext drive. also been ok.
until now!!
The HDD would not mount. Disk utility suggested that it was ok so i tested the imac HD. I got error code 4MOT/2/40000004: HDD- 1502. This doesnt worry me at the moment.
I attached iomega to my Mac book pro and again it would not mount. The disk utility did tell me that the iomega needed repair. it advised that i should wipe it and restore.
So I used the MB Pro disk utility to create a DMG. and saved it to the desk top. I then erased the iomega. did a repair and it all seemed ok. So then i try to do a restore.
After a very long time it said internal error with the dmg. using disk utility i did a convert dmg (compressed) and saved it to the iomega. middle of the night job!!
got up this morning and indeed it had sent the DMG to the iomega. But i could not open it. The iomega itself seemed dandy asking me if i wanted to use it as a time machine etc and it mounted ok and i saved a small jpeg to the iomega as well. I then thought that maybe when i did the convert as a compressed file i made a mistake. i'm guessing it should be a read and write so i started all over again.......... wiped iomega (which was quite quick) then tried the convert tool again.....it trys for a while then says there is not enough disk space...........I'm not sure which disk it is refering to.??
I have purchased a 1tb hard drive today incase the iomega is some how full up.
So really my question to the world is .........Help?well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
Question 1: Does this model have a PCI Express slot?
Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
Appreciate your help & advice..No & no.
-
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.
FaceTime for Mac: Troubleshooting FaceTime
-
When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call. -
Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
Shadow30 wrote:
Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
• Only if your video camera supports it. Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
• Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
• If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac. For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
• The retailer who sold you your video camera may have other suggestions.
• If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
Message was edited by: EZ Jim
Mac OSX 10.9.4 -
i have a mac book pro and a i-pad 2. both of the devices have the same apple id and same mailing adress. if i want to make a face-time call from my mac book to i-pad 2. how can i do that?
You have to add another email address on one of the two devices that you can use as the "You can be reached for FaceTime at" contact address and then remove/uncheck the Apple ID email address as the contact address on that device. The way you are currently setup is like to trying to call yourself on your on phone - from your own phone.
Using the iPad as the example go to Settings>FaceTime>You can be reached for FaceTime at>Add another email address. Then add a working email address in the next window. Apple will verify the email. Go to the inbox of that email account, read and respond to Apple's email in order to complete the verification process.
Go back to Settings>FaceTime>Uncheck the Apple ID email address and make sure that the new email address is checked/selected (you will see it being verified again) and that new email address will be your contact address for the iPad. -
I have a brand new mac book pro, I want to plug my iPhone into it & transfer everything from it onto the mac book, pics,music etc. I'm worried if I plug my phone into the Computer I will loose everything. How can I make sure this doesn't happen?
When you plug your iPhone to Mac,click the Summary button and select “Manually manage music and videos".Then iTunes would never delete your original music.
The most easy way to solve your problems is to move your music to your new Mac.Please refer to this article from Apple.com
http://support.apple.com/kb/HT4527
More review:How to transfer iPhone music to Mac -
Looking for a Dictation App for my Iphone and MacBook Pro.
Want to send all dictation to Word.
I have Dragon. Should I purchase Dragon Premium or Dragon for Mac?Care to share which OS you are using?
OS has its own dictation program.
Should I purchase Dragon Premium or Dragon for Mac?
Only you can make that determination. Read the system requirements for both and read the reviews. -
My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?
No noticeable speed differences running the four latest OSs on my machine.
-
I have bought Mac Os X Mauntain Lion Operating System for my mac book pro some time ago.I then reinstalled my system.The original operating System on my Mac is 10.7 Lion. Now I cannot download Mac Os X Mauntain Lion Operating System.It says"This product is not avaible for Turkish App Store".How can I get this Operating System?
http://www.apple.com/tr/support/
-
I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?
All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.
-
Got new macbook pro. What is the best way to transfer my itunes from my old pc to my new mac? I want to be able to plug my iphones and ipad in to new mac and have redo anything
See Here... This should transfer everything...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html -
My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older version. Please help. This is my first computer so i dont have any experience on how to fix this.
You can't install the App Store version of Mavericks because your model needs a special version. If you ever need to reinstall it, boot into Recovery.
Maybe you are looking for
-
Dynamic Creation of list box on excel sheet and handling events
hi all , i m working on excel to sap integration application and for that i need to create dynmicaly list boxes in excel and also needs to handler events of each boxes.. please suggest me somehting asap/ thanks in advance, jigs helpful ans will be re
-
I wanted to purchase an iPad2 online as I am buying as a gift. But, could it be deliver during the weekends as all my housemates will be working during weekdays?
-
Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I a
-
What is code fix for Internet Exp. 6 and 7 for my site?
My posted site <cumccda.org> is not presenting correctly in Internet Explorer 6 and 7. I was under the impression that Dreamweaver automatically put in code to make a site work correctly with the new CSS in the older browsers of I.E.. Am I wrong? If
-
How to connect Peachtree database with an Excel File
I have Crytal Report 2008 SP1 for Peachtree Quantum 2010. I need to make a report that links an Excel 2007 File with Peachtree data files but I have not success. I could do it with previous version of Crystal . Could any one help me on this matter