I have a 2011 mini with usb connector when I attempt to connect my nano I get the message that I do not have the correct adapter cable. I got the correct adapter cable from the Mini dealer. Any suggestions?
I cannot get my Mini Cooper to sync up with my nano thru the USB port. When I hook up with the cable that came with the Nano, it acknowledges that it is an Ipod however it displays the message that I do not have the correct cable. When I use the audtio adapter cable from BMW it doesn't see the Nano at all. Has anyone else had the issue and what did you do to over come it I tried my nano in another persons car (a Ford) and it worked with no issue.
This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock
Similar Messages
-
There are/were three problems:
'''1.''' Why, when I open Firefox 9.01 do I get a message that I do not have the latest version when '''Help>About''' Firefox says I do?
'''2.''' Also, with the 8.xx version, I was unable to open in a new window with a right click until I upgraded to 9.01. (Old problem now, but I am curious.)
'''3.''' When I tried to uninstall the older version the uninstaller told me that I had to close the open version, but it was closed according to my taskbar. I also have this problem with Thunderbird.1. You are using the latest version which is Firefox 9.0.1
From your description it sounds as if you may still have the old http://www.google.com/firefox Firefox start page hosted by Google as your homepage. This old default homepage is no longer used as '''about:home''' has been in use since Firefox 4.0
Either ignore the message, change homepage to '''about:home''', change it to another page or leave blank.
http://support.mozilla.org/en-US/kb/How+to+set+the+home+page -
When I try to open some pictures in finder with preview I get a message that I do not have permission to open it. It tells me to go to file - info. Don't know what to do from there.
When you do Get Info for a picture, what does it say in Sharing & Permissions for your username. The Privilege should be "Read & Write"
-
When I try to load the new firefox, I get a message that I do not have certain priveleges.
You keep tempting me with updates. I run 4.0b8. When I try to put it in my application folder, I get the message that I do not have certain privileges.
If you get an error message that you do not have sufficient permissions to update then easiest is to trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I am new to Facetime. I want to be able to talk to my iMac from my Macbook. When I try to connect via email I get a message that says the person being called "is not available for Face Time".
Hi PhiDor,
Thanks for visiting Apple Support Communities.
See this article for some information that can help:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Regards,
Jeremy -
In the title, I have this kit and it will allow me to connect my camera to the iPad (and my iPod) but gives me a message that this model camera (?) will not work with either. The camera is a Canon EOS Rebel XT and about 5 years old. I had an earlier connection kit that worked with a Canon (don't know the model) earlier but now I have no function with this equipment. Any suggestions?
With a Rebel XT / 350D you need to enable PTP (Picture Transfer Protocol) on it in its settings :
Is that what it's currently set to ? -
How do I manage local device storage in settings? I know how to get into Settings, of course, but not how to proceed beyond that. Thanks.
Go to Settings>General>Usage>Storage and check to see how much storage you have used.
If you are deleting apps and other content, something about that message doesn't seem right to me. What are you trying to do when you get this message? Take photos? Shoot a video?
Try quitting the camera app completely and restart the iPad. See if the message goes away.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
It specifically says "Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder. Do you want to save a copy of this item in the default folder for the item?" when I try to add to the iCloud calendar on my PC.
Don't know if you fixed this yet but I found a solution that sort-of makes sense.
We installed the iCloud control panel on Windows 7 to sync my client's Outlook 2010 Contacts and Calendar to his IOS devices. Crazy thing is we got this "Your changes cannot be saved..." message whenever he tried to save a calendar event. But this error would only occur when the event had a start and stop time. All day events were OK.
After scratching our heads for an hour I asked him to create a calendar event on his iPhone. It synced properly to Outlook and when I opened the item it showed the Time Zone - which wasn't shown on the event when we created one on the Outlook calendar first.
So the fix was to set the default Time Zone (ours would only work if it was Eastern Time (US & Canada.)) Apparently Outlook includes the Time Zone in its calendar update logic and if it is missing it inappropriately throws the 'Permission' error.
These apps have become too complicated ;(
Kim
FileSafeServer.com -
How can I pair my iPhone 4 to my computer via bluetooth?
Actually you can if you have tethering on your phone. I tether via bluetooth with my macbook air all the time. It will only pair if you have tethering turned on and if your carrier supports it. Otherwise it will not pair.
-
I am trying to upgrade from 10.5.8 to Snow Leopard 10.6.3 and I get a message that I do not have enough memory. I recently bought a 2TB WD back-up drive and backed up the entire computer. Now how do I free up more memory to allow me to install the new software?
First thing to try is emptying the trash to get more space.
Go to the Finder -> File Menu -> Empty Trash.
This will free up some space.
Next look at your Download folder. Click on "Size" to sort by largest to smallest. This is where you have downloaded files over time and you should be able to delete a good amount of them, if you don't need them any more, to clear up space. Select the files you want to get rid of and hit "Command-Delete". This will move them to the Trash. You will then need to Empty the Trash again.
You can also look through your documents for large files. Do the same think, click on "Size" in the finder window to sort by largest to smallest.
Lastly, look at your applications folder. Unlike a PC, you can just Delete applications. Now certain data will still remain, but the bulky items will go away by doing the same "Command-Delete" on the applications you don't want.
Don't forget, after you have deleted things, you need to Empty the Trash. -
I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest
Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.
-
When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified. There is nothing wrong with my apple id and I do not want to change it.Any suggestions?
Debi....
Try "resetting" your Apple ID password > Apple - My Apple -
I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?
Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks! -
am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?
Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support -
I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>
Maybe you are looking for
-
I have a lot of movies that I had downloaded on my external hard drive all of which are in regular dvd format, my question is how would I go about streaming and watching those movies or for that matter converting to movies to any Apple format? Please
-
Hi all, I'm facing a strange boring problem. I've a tomcat runs a webapp that using thin client connects to a remote DB. From about a week is not able to connect anymore. Java hangs and report this error: java.sql.SQLException: Io exception: Connecti
-
Add Digital Signature Using C# and Acrobat SDK
Hi everybody! Please, how can I digitally sign PDF documents using Acrobat Professional 8 API and C# language? I know that I need use JavaScript APIs (IAC) but I can't find anything really helpful in the Acrobat SDK Documentation. Could anyone post a
-
Add 17 minutes from the systen date
Update the entry_date by getting the system data + 17 minutes. Anyone, can provide solution for this? SELECT TO_CHAR(sysdate, 'fmDD-MON-YYYY fmHH24:MI:SS') FROM DUAL;
-
Why can't I restore my backup to my replacement phone?
HTC Sync won't restore my replacement phone past 33%. It has been stuck at that percentage for a VERY long time. I've cancelled and restarted a few times but it always only gets to 33%.