I have a 3rd generation nano ipod and after connecting it to my mac to sync my calendar, it said it no longer would sync the calendar.  What's up with that???

I have a 3rd generation nano ipod and after connecting it to my mac to sync my calendar, it said it no longer would sync the calendar.  What's up with that???

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

Similar Messages

  • 3rd generation nano frozen and won't reset

    I have a 3rd generation nano, that is about 3 weeks old. It is frozen and it won't reset. I've reset before with no problem, but for some reason it won't reset anymore. Any tips?
    Carrie

    I've successfully reverted to 1.0.1 using information in the Mac OS thread. Go to:
    http://discussions.apple.com/forum.jspa?forumID=1213. It has all the guidance you need to revert to 1.0.1. Below is part of my recent post within that thread.
    "I downloaded the two 1.0.1 files (iPod_26.1.0.1.ipsw" and "iPod_26.1.0.1.ipsw.signature) provided on this thread by "Alain Claude Cl..." (http://discussions.apple.com/profile.jspa?userID=1036653). Many thanks Alain. I followed his instructions, also in this thread, for installing them. I also found the posts from "sottil" (http://discussions.apple.com/profile.jspa?userID=1033843 ) to be extremely helpful.
    Thanks to everyone in the thread who kept this topic going. Until Apple gets its act together and issues 1.0.3 or 1.0.2.1 or whatever, the only solution is to revert to 1.0.1 following the guidance in this thread.

  • I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • 3rd generation nano iPod not showing up under devices in iTunes anymore??

    When I plug in my 3rd generation iPod nano to my mac OS x 10.7.3 and open iTunes it does not show up under devices anymore.  Why and how can I fix this so I can start transferring my songs again?
    Thank you!!!!!!!
    I have tried every USB port.
    I am also running an iPad 1 off of this computer.

    Thank you but I have tried this and it still does not show up.  I even tried to delete itunes and reload it but the computer says that it is not able to delete itunes.

  • Have a 4th Generation photo ipod stuck on connect to power source in restore

    I just replaced the 20 GB HD with an 80 GB HD...As I was going through the restore process, I'm stuck at the connect to power source part. I don't have the apple usb wall charger, but I do have a usb wall charger. Do I need to use the one that came with the ipod when I bought it or could I use another usb wall charger?
    I'd hate to go and spend any additional money to get this working. Any suggestions?

    For this particular iPod model (4th gen), you need the square white power adapter that came with the iPod, to complete that last step, if you are using USB for the connection.  It has something to do with the connection's voltage.  The USB port on the computer does not provide it, and many third-party USB power adapter do not either (some may).  The more recent Apple power adapter that looks like a small cube should work.
    NOTE:  If you happen to use a Mac with a FireWire port, and you have a FireWire docking cable, you do NOT need to connect it to the power adapter to complete the Restore.  So a FireWire port apparently provides the required voltage.
    If you have an Apple Store nearby, you could probably take it there and ask the Genius Bar folks if you can plug your iPod into an Apple power adapter.  Do not have them perform a complete Restore using a Mac, if you use a Windows PC.

  • I have an older generation of Ipod and I am trying to upload all my songs from my old Ipod to my new Itunes account. How can I change my old Apple ID to my new one so I can keep all my songs without having to buy or hunt for them all over again?

    Please help I am having the hardest time trying to get all my songs on to one account to make my life easier, but my Ipod is registered under an old apple account and I want to change it so all my old songs go onto my new apple ID. Any suggestions, please help?

    Sorry meffie, you cannot transfer purchases from one Apple ID to another. Are the songs under the old ID all purchased via iTunes?
    If so, then sign onto the iTunes on the computer with your old ID and Authorize the computer for that Apple ID: Store on the top menu, then click on Authorize This Computer.
    Once it is Authorized, you can then go to the iTunes Store and under Quick Links on the right-hand side, click on Purchased. Then click on Music, Songs, Not In this Library, and you should be able to see all of your purchased music, which you can download to your iTunes library individually by clicking on the cloud next to the song, or you can click on Download All at the bottom of the screen to download all of the tunes.
    Cheers,
    GB

  • I have an older generation of ipod and cant get music from cds onto it and get music from it onto the computer

    plz help!!!!!!!!!!!!!!!

    I need more information then. Tell me exactly what you are doing and what happens
    http://support.apple.com/kb/ht1386

  • After i have compiled playlists on my ipod and then connect it to the pc, upon disconnecting the ipod touch all playlists have not been saved .I can only save playlists that i compile on the pc.an error sometimes pops up saying data sync cannot be saved.

    When i have saved genius playlists or compile my own on my ipod touch they do not save when i then connect to my pc.
    Ocasionally a message saying cannot sync data services pops up.but i always lose the playlists.
    The only way i can save playlists is to edit them when i am connected to the pc.  HELP ?

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • 3rd Generation Nano playing songs slow with static.

    I have a 3rd generation Nano and I have noticed that it has been songs a bit weird lately. It is not every song but rather every few songs. What happens is the song slows down with some static too. I equate to a record playing on a slower speed than it should. I am not quite sure what is going on...please help.

    The songs were purchased from iTunes therefore I do not believe that they are corrupt. May I ask how a song can be corrupted?
    I am assuming that a visit to the Genius Bar is order, correct???

  • 3rd Generation, 15g Ipod- Will Not Charge- HELP

    I have a 3rd generation, 15g Ipod- I keep it for nostalgia purposes but I can't get it to charge.
    It has a new battery.
    I'm extremely frustrated at my experience with Apple. Technology changes so fast (i've owned it 7years) that no one seems to know or care to assist me either at the Apple 800 number or in the Apple store.
    I have the original Ipod but not the cradle or anything else that I can find. We have purchased so many Ipods over the years.
    So I have been told that if the battery gets to low I must charge it with the a wall adaptor. So today I purchase a new wall adaptor but it won't charge the ipod. Plugging into my 2 year old Imac won't charge it either. Is there another way to charge the Ipod?
    I just received it back with a new battery. It was 1/4 charged and Imac recognized it perfectly. I just think the battery got too low and needs to be charged another way. HEEEEEELPP!

    Hi,
    I just think the battery got too low and needs to be charged another way. HEEEEEELPP!
    No. You're lucky that the battery went for 7 years. They do not last forever.
    Info here for iPod battery maintenance.
    http://www.apple.com/batteries/ipods.html
    Carolyn

  • I have a 3rd generation ipod nano. I upgraded to lion. I tried to buy an audio book and download it to my nano like I have done at least 50 times before. Now the dialog box states that I need an ipod touch for the same function. MacBook Pro 2008 w/ m.trac

    I have a 3rd generation ipod nano. I recently upgraded to Lion which is causing lots of issues. Aside from that, I went to the Itunes store to purchase books like I have done at least 100 times before with no problems. Now I can by the book and get it to my computer, however when I tried to download the book to my 3rd generation ipod the dialog box informed me that to download any new audiobook purchases I would need an ipod touch. My ipod nano 3rd generation serves my purposes just fine. Why should I be forced to buy something I do not want just to continue something I have always done seamlessly? I know this is more of a rant than a question but I am sure someone else out there has had this happen to them. Maybe you could share your thoughts on how to work around this issue if possible?

    I forgot to add the last obvious and crucial step I had taken - plugging a different iPod into my system. It was also not recognized. That was the final proof I needed to determine if the problem was device or system. But now what?
    I truly appreciate any help I can get!
    Thanks again...

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

    I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • I have a 3rd generation IPod and the screen has gone completely blank.  It is fully charged and will play music but I have no idea where anything is.

    I have a 3rd generation IPod and the screen is black - it is fully charged and will play music but there is nothing to be seen on the screen.  I have no idea how to fix this.  We live in France now so any of the fixes have to be in English since I can't read French.  Any advise would be greatly appreaciated.  I looked at some of the other answers but I have no idea where the Hold button would be on this.  Thanks.

    Try here:
    iOS: Not responding or does not turn on

  • I have a 3rd generation ipod, the screen is broken and the battery is dead, I wanted to know if I can get an exchange for that towards a iphone 4

    I have a 3rd generation ipod that was my daughter's.  The screen is broken and the battery is dead but is there any exchange programs to get her a iphone 4?  Her contract for Verizon is up in March 2013 but I wanted to get her an iphone for christmas.  Can anyone help me please?

    There is no exchange program. If the damage was caused by the user, it also wouldn't be covered by any warranty, so your best bet is to try to sell it as is or get it fixed and then sell it or keep using it. Some resellers will accept trade ins - I know this company accepts trade ins, but it may just be Macs, not iDevices - you can check though:
    http://www.powermax.com/preowned_macs

Maybe you are looking for

  • Error in system log

    HI all, this is not a security query, but I need help in this regard. Following error msg i showing in system log. I'm getting this error whenever i'm trying to read the Job in SM37. And in some cases I'm unable to see the spool list which is generat

  • Caller id function

    Hi, I have a problem with the caller id function for my iphone 6, its not functioning. The software has been updated but still not functioning. It's light green not pure green as normal. can someone assist with this problem or I should sent it for a

  • Which is the better option?

    Hey, I'm looking at getting a new mac but I'm not sure what's the better option. My choice right now is between the base 21.5 inch iMac or the Mac mini ( $799 model), and my main use for it would be recording instruments, music production, and movies

  • Airport Card turned off when resuming from sleep - New since 10.6.6

    I use safe sleep regularly, as I use my laptop at both work and home. Ever since the update to 10.6.6 though, I have had to manually turn my Airport connection back on after resuming from sleep. Previously, although it was unreliable about connecting

  • Pga and temp

    Hi Sometimes I hit unable to extent temp errors. My db version is oracle 9i. I guess the pga is not set. I am not sure why total PGA inuse has a value in second query.. Is there any impact if I set pga? SQL> show parameter pga NAME TYPE VALUE pga_agg