I have a Flash site that I created in CS4. Since I upgraded to CS6, it will not scroll in a browser.
The url is http://familyworks.org/magazine/fall_2012Issue/fall_2012_magazine.html .
In the CSS styling in the head of the html page change the overflow property to be auto...
body { margin:0; padding:0; overflow:auto; }
and see if that solves the problem
Similar Messages
-
Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guysOkay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;) -
the details are pretty much the same as the question. I cannot get any content to load without wiggling my mouse across the page that is trying to load. The busy circle just spins and spins but nothing loads without moving the mouse.
i think the best option at the moment is to use the firefox 31 esr version: https://www.mozilla.org/en-US/firefox/organizations/all/
-
I have a web site that I subscribe to and when I pulled it up Firefox asked me if I wanted to allow it or not. Accidently I pressed never allow for this site. Opps . . How do I undo this? I tried restarting and am now stuck as I can not access my website
Do you mean saving a password?
If you clicked "Never" then you have created an exception that you need to remove.
Remove site(s) from the Exceptions:
* Tools > Options > Security: Passwords: Exceptions
* https://support.mozilla.com/kb/Remembering+passwords -
Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was going to buy the one advertised on the website until I discovered it's only for students and teachers, which I am not. What should I do next as I need to use PDFs on a daily basis. Thanks! I would like to be able to download this and pay online. Possible? I currently have Adobe Acrobat XI Pro. I have a Windows 7 system. Please help!
As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly -
I have an existing Ibook that I created. I wanted to copy the whole book and rename it. Then modify several pages. Is that possible?
Sure. Right click on the book in the left hand pane and choose 'Duplicate'. Then work on the duplicate.
-
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!
Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/ -
I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them or must I do it on another machine?
KaibiliPhoto used to support the PCD format up to a few years ago. It's extremely frustrating that Apple decided to no longer support this format and now I'm directed to pay nearly $40 for an app that will (GraphicConverter 9). Did Lemke Software make a deal with Apple so we'd have to pay a premium for a very overpriced converter? And, how are decisions like this supposed to encourage the use of iPhoto?
Apple users already pay a premium to use a Mac. Obstacles like these eventually destroy loyalty to the Apple brand. Just ask Microsoft how their back room deals that exploited their customer base worked out for them. -
i have an app that i want to download on my mac pro. it will not let me because it was not approved. i know the app is ok. how do i get it downloaded?
What are you referring with not approved? What happens when you try to download it? If you see an error, copy it here. At first, I suspect that Gatekeeper may be the reason why you can't install that app > http://support.apple.com/kb/HT5290?viewlocale=en_US&locale=en_US
-
Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.
Crizzo is right, the best way to charge is with the included power block. That said, the USB cords are interchangable as far as an of us know. (just not power bricks, iPhone and iPod bricks put out 5W of power, the iPad wants 10W and will always say 'not charging' if plugged into less power than it requires even though it will charge, just very slowly)
If you have tried to charge your iPad - with the iPad charger - with multiple cables and multiple computers and get no joy then it's time to head to the apple store and have them check it out. The 30 pin USB port can go bad - mine did - and it's a manufacturer's defect (unless there's any sort of obvious damage) and should be covered under the warranty; -
I currently have an ipad 2 that seems to be very weak in picking up wifi connection. I have a kindle that picks up the signal from my upstairs, but my ipad will not. Does the air have better capability in doing this? Would think of upgrading, as my ipad 2 also seems to be losing battery life quicker. Thanks!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sighttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-Ohttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connecthttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipadhttp://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzhttp://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.
recalibrate your battery.
-
Pages created with DWT will not scroll
I recently acquired a contract to update a site built in CS2 with tables to something that's HTML 4.01 compliant. I'm using CS5 and have updated the DWT's design, but now my pages will not scroll using the new template. I've tried using the overflow tag in several ways and locations within the DWT and style sheet itself, but to no avail. I have also created new pages from this template and they won't scroll either. I'm clearly missing something, does anyone have any ideas as to what that is? Does anyone need snippets of code?
Thanks, Kevinelvikingoproductions wrote:
I recently acquired a contract to update a site built in CS2 with tables to something that's HTML 4.01 compliant. I'm using CS5 and have updated the DWT's design, but now my pages will not scroll using the new template. I've tried using the overflow tag in several ways and locations within the DWT and style sheet itself, but to no avail. I have also created new pages from this template and they won't scroll either. I'm clearly missing something, does anyone have any ideas as to what that is? Does anyone need snippets of code?
Thanks, Kevin
Why are tables not HTML 4.01 compliant?
Regardless, you have to post a link to the page in question or provide the code (both HTML & CSS) for examination. The typical link you will be pointed to is the validator, so you may want to clean up as much as you can before you provide the link.
http://validator.w3.org/ -
I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new. They will not drop into either folder. Nothing happens.
I checked my secondary harddrive and there is plenty of memory.
I emptied my burn folder but the photos still will not drop into it.
I created a new burn folder, no luck with this either.
230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
I have shut down and restarted my computer. No change. The photos still will not drop out of iPhoto.
My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available. It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
I have never had this problem before. It is usually very easy to move my photos from iPhoto.
I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.
Thank you so much for any help you can provide.
I really appreciate it.YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop. But that doesn't explain why I'm having to go that route now. Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore? I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help. I really, really appreciate it.
Maybe you are looking for
-
How to get Text from (.txt) file to display in the JTextArea ?
How to get Text from (.txt) file to display in the JTextArea ? is there any code please tell me i am begginer and trying to get data from a text file to display in the JTextArea /... please help...
-
In miro what is po field parameter name
I don't know what is the parameter name in po field in miro, my problem is i have to check a business area of corresponding plant, i have been implement a badi 'zmrm_header_check', if i put hard coded po number then its work correctly , i have to pu
-
HP notebook 635 usb boot option
We have several hp notebook 635 that need to have usb boot option disabled in bios. When i go into bios usb is the only device that I can't disable. Am I missing something? Is it possible to disable usb boot as these computers are being used by stude
-
Routine to read time dependent master data
Hi Experts, I got a requirement, where I have to read time dependent Master Data. I need to write a field level Routine on "DEPTID" and to read from EMPLOYEE Master and Dateto=31.12.9999. I need to get last department ID for each employee. Below are
-
URGENT!!! servlet communication
hi!! big guys i have problem plz find a solution for me i am processing user request form thru a servlet and i want to generate another servlet or receiving error values from user so how can i call another servlet from within other servlet also passi