I have a hp desk jet j610a ,i'm trying to use eprint to print too my apple ipad ?

Need assistance printing from my iPad too my hp desk jet printer model # j610a

Unfortunately the j610a does not have ePrint or AirPrint capabilities. You will be unable to print to this printer from your iPad for the time being. We are coming out with an app called HP ePrint Home and Biz soon that will allow you to print from your iPad in a limited capacity but if you want the full functionality of AirPrint you would need an ePrint enabled printer.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller.  Can I do this with anything in Mainstage?  I also have Line 6 Pod farm 2 - anything in there?

    I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller.  Can I do this with anything in Mainstage?  I also have Line 6 Pod farm 2 - anything in there?
    The foot pedal also seems to have an on/off switch that activates when it's depressed all the way.  How do I set that up in Mainstage?  Can I cycle between and effect and a volume pedal, for example?
    Mainstage version is 2.1.3
    Thanks for all help given.

    Hi
    Bruno Filipe wrote:
    Thanks for the help but please don´t duplicate the answers. I´ve explain that to Chamie7
    Noted, except that the OP clearly did not feel that your answer was helpful
    Chamie7 wrote:
    Sorry, no help there.  Any guitar players know what I mean?
    and
    Bruno Filipe wrote:
    You can use a keyboard or other controller (with jack like sustain) and then assign controller (normally 64) to what you want Mainstage to do.
    This is unlikely to work if you plug an "Expression Pedal" such as an FC7 into a "Sustain Pedal" socket using MIDI CC64, which usually operates as a switch rather than a continuously variable value.
    If I understood the OP's request correctly, the OP wanted to use the FC7 as a "Whammy Pedal", which does a PitchBend 'dive' effect (amongst other things)
    http://en.wikipedia.org/wiki/DigiTech_Whammy
    CCT

  • TS1398 I have a box around the apps I am trying to use.  I cannot close my apps as a box is around the app that I am trying to close.

    I have a box around the apps I am trying to use and I cannot close my apps as a box is around them. 

    You appear to have the VoiceOver Accesibility feature turned on. 
    Try triple clicking the Home button and then going to Settings>General>Accessibility and turning all the Accessibility feature off. If problem see:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • We live in an old Victorian House and have virtually no connectivity on the second or third floor using a  Linksys System, will the Apple Aiorport solve thge problem ? do you need sattelite stations on each floor?

    Any advice on Airport solving our second and third floor WIFI connectivity problems welcomed, do we need sattelite stations, ?? do not mind buying the system if it works?

    ......will the Apple Airport solve the problem?
    The broadcast power of all wireless routers is controlled by law, so as you might imagine, devices from varying manufactureres tend to perform about the same. It is very unlikely that an Apple AirPort router would perform significantly better...or worse...than the Linksys device that you have now.
    do we need satttelite stations?
    Yes, probably at least one per floor and possibly more, depending on the thickness of the walls in the areas where a wireless signal will be needed. Since you already have a Linksys router, and it is always best to use products from the same manufacturer on a wireless network, it would probably make sense to check with Linksys to see what they suggest as additions to your current router.
    It would be a excellent idea to have an IT professional come out and survey the house and take some measurements with test equipment to propose a system that is right for your needs. That will likely save a lot of headaches (and money) down the road.

  • I have a Windows 8.1 system, I am trying to use the link that customer support gave me earlier to download CS6 Design and Web premium. I did the 1hour and 40 minute downlaod but when i try the second download file it says not all file wre archive. Anyone

    How do I fix. after downloading says I need to download all parts and pieces are missing.

    you need files 1 of 2 and 2 of 2, an exe and a 7z.  download both, place both in the same directory and double click the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have downloaded Photoshop Elements demo version but when trying to use it I get a configuration error (number 16). I have a PC and Windows XP.

    I have tried to uninstall and have down loaded again but I get the same error, does anyone know what to do?

    Hi Helenak,
    You might try creating a new user acct with admin right and try installing Elements from there.
    This might help with the process:
    http://support.microsoft.com/kb/279783
    - Dave

  • HT201900 I have an Epson Stylus SX218 connected by hardwire to my I MAC is it possible to use this set up to print from my Apple IPAD

    I have an epsom Stylus SZ218 printer hardwired to my I my MAC and wish to print from my I Pad any ideas?

    Epson SX218 does not appear on the list of AirPrint compatible printers....see below for details....so it would not be be possible to print from the iPad to this printer unless you add additional software that might allow this.
    About AirPrint - Apple Support
    Try Printopia. There is a free trial, so you will know if it works before you buy. Details here:
    Printopia - Ecamm Network
    There are also other similar utilities available on the Apple App Store.

  • Help! I have an Mbox2 mini,Macbook w/ Snow Leopard trying to use Garageband

    I need to know if this will work i've tried everything. I can record through the built in microphone in my laptop. but can't hook my electric up. need help!!!

    Have you installed Protools or the stand alone driver for your Mbox?

  • I have an iphone 4 and recently ive been trying to use facetime but when it connects it hangs up before i can even see a face

    I need help seriously. I have turned my phone off then on I've reset it by using the home and power button idk what to do I'm really getting mad at my phone. I know stupid first world problems :(

    Maybe updating iOS to 7.1 will fix it.
    <http://www.macrumors.com/2014/04/17/ios-6-facetime-issues/>

  • I have a h p photosmart c4580 and want to print from my apple ipad with ios 6.1 operating system.

    My ipad can't locate my printer using airplay on my ipad.

    Hi,
    The Photosmart C4580 does not support AirPrint.
    Download and use the HP ePrint mobile app to print from your iPad:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3418707&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT5624 Why do I have to change my password when I've only just done one to set up my Apple ipad?

    I've just set up my ipad account and am now being asked to change my password - why?  Seems nuts and no explanation given

    This is not normal. There may be an issue with your Account.
    Suggest you Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Desk jet DJ4515 setup via mobile

    I have purchased a desk jet dj4515 and wanted to know if I can install and set the printer up using a mobile phone as I do not have a laptop or computer.

    Dear Lewington,
    Here you have some documents where explains how to print from a mobile:
    http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
    http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
    http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Help with HP desk jet F4435 on MacBookPro

    I tried installing my HP desk jet F4435 with the disc that came with the printer. I received a "successful" message. It wouldn't print. Then I uninstalled the printer and tried just plugging in the USB to connect it. Tried printing and receieved yet another error message.
    HELP!

    Some hp driver software for your printer here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=&sw_l ang=&product=304431#N207
    If needed, gutenprint 5.2.9 can be obtained here:
    http://gimp-print.sourceforge.net/MacOSX.php
    Many network printers do not require an explicit driver, or can use "Generic". They accept standard protocols and can be printed to directly. If the printer can be discovered automatically and appears in the list of available printers, it should determine what driver is needed and go fetch any needed driver for you.

  • I have imported a color picture and trying to use the adjustment brush to turn the background black and white and it isn't working.  I have Lightroom 5.  Any suggestions?

    Hello - I have Lightroom 5.  I have imported a color photo.  I am trying to use the Adjustment Brush to change the background to Black and White and leave a portion of the photo in color.  When I begin painting the photo with the Saturation at -100 I don't see any changes to the photo.  I push the "O" key and still nothing.  I have tried to reset the photo, restarted Lightroom and still nothing.  Please help.

    Set Flow and Density of the brush to 100
    Reduce it where you want the effect to blend.
    Bruce

  • I have 2 airport express base stations that I am trying to use to extend my wifi. I have windows 7 and downloaded the airport utility but it wont pick up my airport express. Does anyone know what im doing wrong and how to get them to work?

    I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.

    Thanks for providing the model information.
    I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
    Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
    Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
    Please post back your results.

Maybe you are looking for