I have a Mac Book pro 2007 and when I try to start, after logging in it just doesn't open. The apple symbol shows but it seems to be frozen????
I have a Macbook Pro from 2007 and run Mac OS Lion. Today it froze and when I tried to restart after log in it just freezes and does not open? Can anybody help?
Gunilla
First thing to try, reboot from the Mac OS X install disk that came with your machine. When it starts up, select your language, then choose Disk Utility from the Utilities menu. Select your hard drive in the list and then, in the First Aid tab, click Repair Disk (NOT Repair Disk Permissions). If there were problems that were repaired, try rebooting again and see if the problem is gone.
Alternately, if you have upgraded that machine to Lion (Mac OS X 10.7), you can hold down command-R at startup to enter recovery mode, and then open Disk Utility from there and do the same repairs.
Let us know what the results are for further assistance, if the problems continue after repairing.
Similar Messages
-
it acts like it's going to download, but gets halfway through and turns back off. i've tried to put it in safe mode by holding the shift button down, but it wont do anything..
Use the original installation disk and get into Disk Utility.
Insert the DVD in your MBP as if you will be installing the OSX.
When you get to a display where there is a menu bar on top, click on UTILITIES.
From the drop down menu, select Disk Utility.
Op[en Disk Utility.First Aid and run Verify and Repair.
Ciao. -
Please help me..
What can I do to get my laptop up and running again?See if this helps:
http://support.apple.com/kb/TS2570
Ciao. -
Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
Please help. I have a Mac Book Pro ( late 2007- A1226) that I want to install Windows 7 ultimate on. I have boot camp 3.0 and I can set up the partition but when i click start installation, I get a black screen ( for a few seconds) then it goes to a grey window, which alternates between flashing the apple symbol and a circle with line through it. It will do this for however long I let it go for.
Would it be better for me to buy parallels software than keep persisting with this avenue.First, make sure you ONLY have the wired Apple Keyboard and wired mouse connected.
You should have BootCamp Asst. 3.3 or 3.4 now I believe is the latest version.
Do you have the W7 disk or ISO download version?
When does the flashing start, after Windows 7 sets the NTFS formating and you click to install? -
I own a mac book pro 13" and I use parallels for work and desperately need the "pause" key that used to be on my PC. It is the equivalent of the f15 key. My keyboard only goes up to f12 and I have looked in here and on google and can't figure it out. doesn't anyone have ideas?
Thanks!I have found the solution for myself for the above. I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!
-
I have a mac book retina (13-late 2013) and I can´t see the pictures with photoshop cs6 or neither with digital professional of Canon. I use EXTREME PRO SAND DISK and I have other macs older than this and I never have any problem like this.
Could you recond me something to do?
Thank youI have found the solution for myself for the above. I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!
-
Why won't my Apple monitor stay on with my mac book pro?
I know there were many more problems 5 yrs ago with 3rd party monitors and have been some issues in between also.
Apple does have what is needed to use multiple 30 inch displays and the 5770 is pretty mainstream and standard.
It is also about the only card being sold outside ebay and a couple places in case you want to take your chances with Nvidia 8800GT 1st gen model or ATI 4870.
Mini DisplayPort to Dual-Link DVI Adapter
Display Adapters Needed -
i am in kl based
can i get something for my old mac book pro ?
and if yes where ?
thx wernerI sold my old one on eBay and got a fair price for it. Apple Stores don't take trade-ins.
Regards,
Clinton -
I have a Mac Book Pro with a 320hdd, 2.33 processor, 8 gigs of RAM and OS X 10.9.4 . My hdd crashed and I cannot access it so is it possible to install a 1 terabyte drive with the operating software already installed and also upgrade my RAM to 16 gigs?
If I were you I'd install a small SSD as the boot drive from OWC:
http://eshop.macsales.com/shop/SSD/OWC
Then put a second large conventional drive either in the optical bay (Data Doubler) or in an external.
You don't say which MBP you have: Size, CPU type.
Also when you upgrade you could see if you can salvage your data from your old HD. Can you hear it spin up? If so Data Rescue IV. -
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks
I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262 -
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Blocked Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
Maybe you are looking for
-
JDeveloper 11.1.2.4 Updating JSF
Hello, Is it possible to update the versions of JSF/Trinidad in JDeveloper to the latest versions? I am running into issues with components that appear to be outdated. In particular: <tr:table> and <tr:selectManyShuttle> are not working correctly. Th
-
Checking the status of the insert query in JSP
frendz, i am working with JSP .i have some content to be inserted in the database.i have used the insert query in SQL for that.i am able to check whether it has been inserted properly in the SQL but i want to check the status of the insert query with
-
ITunes, 2 Computers; and an external Hard Drive
I am an IT tech for a company that will remain nameless. In their attempt to limit liabilities they have said all music file are to be stored on external storage owned by individuals. But iTunes is fine to use on the company computer. My question is
-
How do I get Snow to work with MacBook Pro running Tiger?
I have a MacBook Pro running Tiger (obviously), and have been trying to get my Snow base station (a.k.a. Dual Ethernet) to work with it, but couldn't. After hours of searching these pages, Apple Support and Google, I found this: http://docs.info.appl
-
How do I rid of duplicate songs
I recently turned on my Itunes and it had duplicates of the majority of my songs in my library as well of some songs in the wrong artist folder, anyone have suggestions on how to fix this problem