I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.

Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Similar Messages

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers. When I switch usb cables to use the other scanner in I get the message saying there is no scanner installed. I can see the 2 machines in the printer list.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers.
However it seems I can only use only 1 scanner.
Because when I switch usb cables to use the other scanner and try to import in Photoshop ,I get the message saying there is no scanner installed.
I can see the 2 machines in the printer list.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers.
However it seems I can only use only 1 scanner.
Because when I switch usb cables to use the other scanner and try to import in Photoshop ,I get the message saying there is no scanner installed.
I can see the 2 machines in the printer list.

I am trying to sync my songs in iTunes to my iphone4S, its running on IOS 7.3( the recent update) it just does not sync. I can see the songs in my library but they just don't transfer. Please help!

I am trying to sync my songs in iTunes to my iphone4S, its running on IOS 7.3( the recent update) it just does not sync. I can see the songs in my library but they just don't transfer. Please help!
I have Macbook Pro running latest Mavericks with latest version of itunes as well.
I have tried coiple of options which were posted here in discussion forum but none of them worked out for me.
Any help would be appreciated.

connect device and open itunes navugate to music and click the box that says all music library and click sync or apply bottom right corner

Mid 2010 Mac Mini -- Can see pixelated desktop through browser window

Hello,
Sometimes when I am browsing I can see certain areas of my screen that are pixelated and I can see pieces of my desktop in these pixelated areas. Is there something wrong with my graphics card or does this just happen to everyone? I'm using an HDMI connection to a 32" LCD TV.
Your assistance would be greatly appreciated. Thank you in advance.
Regards,
GMack523

Problem sorted.
By using a Mini Displayport to DVI adapter and then a DVI to HDMI cable the monitor works fine.
I had previously tried the same cable with the HDMI to DVI cable that was in the product box, so there is clearly a difference in the way the two display ports support even the same resolutions.
Thanks

When I save eps file as a PDF it loses whole colours, but I can see the colours in preview and if I open the PDF in Photoshop. What is going on?

Has anyone else encountered this? I want to save a 2 colour logo (CMYK) as a print ready PDF but when it opens in Adobe Acrobat the black is missing or the green is missing. I can see all the colours there in preview and if I open the PDF file in Photoshop, all the colours as as they should be!!!

No.. sorry.. it does not seem possible effect .. if you can write you must be able to read..
Are you using the TC with user profiles?
What security are you using for disk access?
What happens if you do turn on full guest access to read and write.. ?
When the Mac that can save but cannot read does drop the file onto the TC,, can the other Mac's see that file? In other words is the file really there.. has it copied correctly. I still think if it has copied and you cannot read it back there is some permissions issues.
Try creating a new user on the Mac that has issues.. and see if the new user and read and write correctly. Make sure the new user has at least equal rights as the users on the Mac's that can read and write without issues.
Your intial question suggested this problem was spread over more than computer.. your second reply has reduced the issue to just one computer.. logically the issue is not the TC.. it is that computer. Ironically I have found logic for computer troubleshooting falls well behind voodoo.

How do i show graphics that are moved off my document page so i can see the

i am moving graphics off my page onto the "background" so I can move them around and reuse them in my document.
How / where can i make them viewable as i work - right now they just disappear. I am in creative suite ID 3-
Thanks

Sounds like you're in preview mode which hides the pasteboard. With nothing selected, hit the w key.
Bob

At the top of my Firefox screen is a toolbar showing the website I'm on and I can see my desktop through it, which I find very distracting. How can I get rid of this toolbar?

I have Windows 7.

Distracting indeed and very botched up.
How to turn disable transparency of Aero Glass and get closer to classic, while maintaining Windows 7 changes.
* Control Panel\All Control Panel Items\Personalization
* Pick a Theme or current theme
*at the bottom click on Advanced '''Windows Color''' and Appearance
* choose a color, change intensity to about 75% (experiment)
* turn off the transparency checkmark <===
Reference: http://dmcritchie.mvps.org/windows-7/win7.htm
Fix colors of toolbars (read comments change style for color(s) you want
* [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish] extension
* [http://userstyles.org/styles/9514 Color Toolbar(s) to identify profile - Themes and Skins for Browser - userstyles.org]

I bought Season 4 of Downton Abbey, have downloaded the first 2 episodes and now can't find the others or even where to do that? I can see the first two episodes but I can't find where to download the rest?

Does anyone have an answer to my question?

If they were purchased they can be downloaded.
http://support.apple.com/kb/ht2519
http://support.apple.com/kb/ht2727
If they were rented you have 24 hours after starting it to finish it.

Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

In iphoto I get the mesage "The volume for [picture] cannot be found" What does this mean? I can see the pictures

iphoto message is "The volume for this photo cannot be found." I can see the pictures but cannot move them?

The "volume" is referring to the picture's location, i.e. hard drive, etc. In any case there is an iPhoto forum where those experts are. Post there.

HT4783 I have an early 2010 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?

I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
As far as I know the older mac is compatible with AirDrop.
Thanks

So by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate.

I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtube

No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

HT201343 I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

Mac Pros don't support Airplay. Only some post 2011 Macs do, MAc Pros aren't amongst them.
http://www.apple.com/uk/osx/specs/
You could try Airparrot software as a workaround.
AC

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

Similar Messages

Maybe you are looking for