I have a macbook 1,1 trying to install Lion or anything recent from leopard but says its doesnt meet the requirements; but it does; how do i install lion on to this macbook?

Model Name:          MacBook
Model Identifier:          MacBook1,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB11.0061.B03
SMC Version (system):          1.4f12
Serial Number (system):          4H******U9C
<Edited By Host>

Kappy is correct. Apple later in 2006 changed the processors to Core2Duo and that has a 2 in the middle of the name. It also then changed the Machine ID to MacBook 2,1.
Before upgrading to Lion, you should also read this tip carefully:
https://discussions.apple.com/docs/DOC-6271
As a lot of your software may no longer work.

Similar Messages

HT2513 I have a Macbook pro and I've lost my ical and widget icons. It says it's in the trash but I can't find it.

I have a Macbook pro and I've lost my ical and widget icons. It says it's in the trash but I can't find it.

Hey Shady K,
It sounds like you've removed the iCal and Widget icons from your dock and want to get the back there for easy access. The following document goes over dock basics and there's a section (which I copied below) that goes over how to get those icons back on to the dock. Essentially you'll just find the application's icon in your applications folder and drag it back.
Mac Basics: The Dock
http://support.apple.com/kb/HT2474
Adding and removing Dock items
If you want to add an application to the Dock, click the Launchpad icon in the Dock and drag the application icon to the Dock; the icons in the Dock will move aside to make room for the new one. If you want to add a file or folder to the Dock, just drag its icon from any Finder window (or the desktop) and drop it on the Dock. The resulting icon that appears in the Dock is actually an alias of the original item (it's kind of a pointer to your original item). If you drag an application or file onto the Dock, you'll be able to open it anytime by simply clicking its docked icon. If you drag a folder onto the Dock, a Finder window of the folder's contents will display when you click the folder icon in the Dock.
To remove an item from the Dock, drag its icon an inch or more off the Dock and wait a couple seconds, then release; the icon will disappear in a poof of smoke. There are some icons that you can't remove from the Dock, such as the Trash and the Finder.
Don't worry, you aren't permanently removing the item from your computer; you simply got rid of its Dock icon. If you want that item back in the Dock, locate the application, file, or folder in the Finder (or with Spotlight), and drag it back into the Dock.
Hope that helps,
David

We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation. I keep getting this message trying to view how to videos on my new iPad mini, does the new full size iPad have the same lim

'We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation'. I just received the iPad mini and get this message when I try to view videos. Does the full size iPad support video play back?

iPads have the same video requirements. What is the source of the video - streaming, download, from video camera?
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
 Cheers, Tom

Hi, my Macbook says its connected to the internet, but it's not working. It's about 2 years old and has been fine up until now. Its the same internet provider and I have a work PC laptop that is connecting fine. Any help greatly appreciated. Liz

Hi,
My MacBook Pro won't connect to the internet, although it says it is connected. The laptop is about 2 years old and up until now has worked fine. My work PC laptop is connecting to the internet fine so I know it can't be the connection. I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
I'm running OSX 10.8.5.
Any advice would be greatly appreciated.
Many thanks
Liz

Believe it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet?

My macbook pro says its connected to the internet but when i load a page, it says no data recieved

ive reset the router, ive restated my computer. my desktop works on the wifi, and so does my iphone. please help me connect my laptop to it to. it claims its connected but no internet page will load.

Hey baileyannneee,
Thanks for the question. Let’s utilize the Wireless Diagnostics tool to help troubleshoot your issue:
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Additional Information:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks,
Matt M.

I have an ipod touch 4th gen its currently updated on sowftware 6.1.6 but shows its connected to the laptop but only says apple iod not the name of the ipod it wont connect to itunes on the laptop.HELP!!!

I have ran itunes diagnostic tests SEVERAL times and says no ipod,iphone,or ipad found.is it my cord?(because this cord im using still charges the ipod)Or is it the ipod charger port? or my usb ports on the laptop (cause ive tried every usb port,same results).please help!!

Hello, Fuentes94.
Thank you for visiting Apple Support Communities.
If your device in not recognized in iTunes, I would try the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

My ipad 2 says its connected to the internet but when i go onto safari it says safari can not open page because its not connected to they internet yet i have full connection

I have tried resetting internet settings but didnt work so what can i do

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
 Cheers, Tom

I have a PowerPC G4. Firefox 5 for Yahoo says that I meet the requirements. But I cannot open the Firefox.app on my computer. Why not? Thanks

I was able to download Firefox 5. When I transferred it to my applications folder, it states that I cannot open, because my architecture doesn't support it. Why doesn't it state that when I looked up the minimum requirements? According to that, I should be able to use it.

Beginning with Firefox 4, Macs must have an Intel x86 processor; your system is a PPC Mac.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4], [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5], [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6], [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7]
The good news is that Firefox 3.6.23 still supports the PPC Mac architecture. The bad news is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*Download Firefox 3.6.23: https://www.mozilla.org/en-US/firefox/all-older.html
*Installing Firefox on a Mac: http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.

Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

Im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything

im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?

I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode.

I have just purchased a 5S iphone, when I tried to sync with my Imac it comes up with "...requires iTunes version 11.1 or later.." my iTunes version is 10.6.3, I rechecked software updates but says there is no updates required. help

I have just purchased a 5S iphone, when I tried to sync with my Imac it comes up with "...requires iTunes version 11.1 or later.." my iTunes version is 10.6.3, I rechecked software updates but says there is no updates required??? I checked when last auto update was done which was 01/07/12 I also tried downloading from web iTunes version 11.1.5 but it wont load because I don't have min version 10.6.8. What can I do to sort this out? Note: I am a not computer savy so be easy on me.

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!

I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!

If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108

I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie

HT201263 hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should

hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should i do ?

In your case your only solution is to restore it ( see http://support.apple.com/kb/HT1808 ) and you may need to force it into restore mode to do that. This will wipe everything off it and reset it as new, without the passcode. You can then redownload purchased content, buy unless you have a sync'd copy of your contacts and photo's they will be gone.

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

I have a macbook 1,1 trying to install Lion or anything recent from leopard but says its doesnt meet the requirements; but it does; how do i install lion on to this macbook?

Similar Messages

Maybe you are looking for