I have a new 27"ACD connected to a 27" iMac (2010) and cannot control brightness on the ACD. Also, the option to turn off the ambient light sensor is not available. Tanks for any help.
I have connected a new 27"ACD to a 27" iMac (2010) and cannot independently adjust brightness on the external display. Also, the option for turning off the ambient light sensor is not available. The iMac has the latest updates according to Apple messages. Any help will be appreciated.
P
No, Detect Displays had no effect. However, I made the USB connection from the ACD to the iMac after the system was on. Following a re-start, all controls are available. Thank you for your response.
P
Similar Messages
-
I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.
I have a WRT54GC that is hooked properly to the cable modem (adelphia) according to all literature... but, our wireless connection to the x360 is lost anytime we turn off the PC, which shouldn't happen. The router is connected directly to the motor. modem. We can be on line on with the pc and x360 at the same time and we have the internet connection. But both connections will also free from time to time on us. The cable HSI was just installed and we are new to this. Any assistance would be great! I'm taking my laptop home this weekend to see if I can get on wireless with it. Also (sorry) all the lights are working as they should according to the router software, but when I put the cd in ran the wizard, it tells me it can't find the router connected to my pc. I'm going batty with this. Thanks.
MCHi ... Mac address cloning is enabled on my router - so I guess that could be a problem, and the filmware version is 1.02.5 - we just installed this thing and haven't done any type of upgrades.
A little history - adelphia didn't connect properly - turning off the pc killed the wireless router connection and then if I hooked right into the cable modem from the pc, I didn't get a connection. So, we unplugged everything and started out fresh following the install wizard and the pc now sees the router. After that, my laptop didn't lose it's connection when the pc was shut down either. So ... the xbox was next. It seems that when we have the WEP enabled, the xbox 360 can not connect to xbox live. We did a media test first it passes the connection to the wireless network and takes the WEP key, but it fails when looking for the IP address. All DHCD information is enabled. So, we disabled the WEP and ran the console test - and it passed. We then did the media test and it obtained the IP address this time, but then failed the media connect (whatever the next test is). Not sure we actually need the media text or just the xbox live test.
I'd like to be able to use the WEP security, but we can't go live when it is enabled.
We are new to this, so appreciate any assistance! -
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
-
hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!
Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
New User created and Test User deleted... I hope this helps. -
I updated my 3GS to os5 and set up icloud and it backed it up, although, the backup says incomplete. I turned off the contacts under icloud and they are now all gone off the iphone. How do I get them back? I feel like they are in icloud, because the contacts went to another iphone i have.
I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!
-
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ... -
Hi! Every time, no matter if I've restarted or powered down, even if it's the only program running, it's the same error. I've checked for any updates for my laptop, made sure it's been defragged weekly, checked system performance... all to no avail. Today is the first issue I've had with LR5.4, and I've been trying to correct it since this morning. I'd be grateful for any and all help. Thank you!
Did you mean, "Lightroom encountered and error when reading from its preview cache and needs to quit?"
https://forums.adobe.com/message/6333848
I've been using LR since 1.0 and never encountered this issue until today. The above procedure for creating a new Preview Cache folder and preview files should fix the issue. -
I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.
iTunes will run fine with the media on an external drive.
However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
http://support.apple.com/kb/HT1364 -
My imei missing, wifi not available...any help
my imei of my iphone disappear and due to that wifi and bluetooth not available and network keep on seaching
Syphone wrote:
my imei of my iphone disappear and due to that wifi and bluetooth not available and network keep on seaching
The disappearance of the IMEI is usually indicative of a fairly serious hardware problem. Contact Apple to arrange for an evaluation. -
After loading the 1.1 update my nano turns off after 60 seconds. is there a fix for this?
After loading the 1.1 update for my nano ipod my nano shuts down after playing the music for 60 seconds. Is anyone else having this problem and is there a fix for it? Very frustrating to have to keep hitting the sleep/wake button and then play to make the music start again during my workout.
You have probably fixed the problem by now, but I also just bought a Nano and it was very frustrating with the music shutting off before the first half a dozen bars of the song. I rang Apple and they sent me this page.... (if anyone else needs help)
http://support.apple.com/kb/TS3700?viewlocale=en_US
All it was that I hadn't pushed the headphones in until they were flush up against the Nano.
Thanks Apple! -
My wife and I each have our own email address and calendar. These are on one IPad. The Ipad has a single ICloud account.
What's the best way to backup both Calendars, etc? Does ICloud automatically back up every account on the same IPad? (I checked ICloud, but I could only find my stuff.)
Thanks for any help!
AlanFirst, you need to understand that there's a difference between "syncing" and "backup". Backup is the saving of content and settings, where syncing is the bidirectional transfer of content for an account to a web-based server (like iCloud, Gmail, Yahoo, etc.)
If you see your calendar in your iCloud account, that implies that you have set up your iCloud account to host (sync) your calendar, and perhaps contacts, email, and notes. An iCloud account can only sync one user's information at a time so it is intended to support a single user. You can have more than one iCloud account, and you can even have more than one iCloud account on the same device (but one has to be primary, and the secondary iCloud has limited capabilities), but a single iCloud account only supports a single user's content.
Backup is the saving of your device's content and settings to use in case you need to recover these things, but you can't see the contents of your backup (just the size and device name). You can backup more than one device to iCloud and you can backup to iCloud or you can backup to your computer, or both (one at a time though, you have to choose).
So, if your wife has her own email and calendar she can certainly do that in parallel to whatever account(s) you have for email and calendar. But if you have only one iCloud account then only one of you can use it for email, calendar, etc. But the backup of these accounts is really just a backup of the device's settings that link the device to these accounts. For example, if she uses Gmail then the backup of the iPad only backs up the fact that your iPad is set up to use her account, it does not backup the account itself (the content of her account is saved and preserved on Google's servers, not your device's backup).
Does that make better sense? -
I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?
dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's. -
N95 - Turn off the search for available wireless n...
Hi,
This is a strange problem - I think...
My N95, will at randon times, and not very often, automatically search for and detect wireless networks in my area, which will then prompt me to select one.
I have turned the Wireless LAN availability setting to never search for Wireless LANS - which was previously set to scan for networks every 5 minutes. (Under Tools-settings-connection-wireless LAN)
The bizarre thing about it all, is that it will often automatically search and detect wireless networks when my phone has been on charge for a long period of time, and not normally at any other period of time.
Does anybody know if there is a further setting somewhere that I could change? or perhaps point me in the right direction, but I do realise that this could well be a unique problem.
Any help on this would be very much appreciated.
Thanks.Message Edited by t2303 on 07-May-200710:58 PMHello. I have a wireless network at home and have connected my N95 in the past.
I did too turned off the ability to search for Wireless Networks from the STAND BY SCREEN but I have noticed that an icon with 4 squares appeared. I was puzzled and went through the manual to check what it meant. It meant that there were available wireless networks in the area close by, obviously my home network.
Note: since my N95 connects automatically to my network it never asked for a password or connection.
If the above sounds like your problem try the following:
Press the menu button and navigate to
Tools -> Settings -> Connection -> Wirelesl LAN
and set "Show WLAN availability" to NEVER.
This helped me on saving on battery.
I hope this helps. Good luck. -
LWAP AP1131 Is there any way to turn off the Round BLUE LED
The 1131 Access point in IOS mode had an option to turn off the BLUE LED circle on the access point. The access point has been converted to LWAP and connected to controller and now the BLUE LED circle is back.... is there any way to turn it off ??
Can not see an option on the controller.
Very bright in a dark room (ie hospital beds...)
CharlesHi tdennehy
Well, first of all thanks a lot for your replay. We have perfect LOS with certainly more than 60% of the Fresnel zone being clear. The Yagi antennas are pointed at each other with no doubt, we actually got while in the "install root" and "install non-root" bridge mode the I and R LEDs on and stable, and S blinking. At times we got all the LEDs blinked fast but I guess we were passing through some strong signal concentrations. Heh, the client sugested to install the Yagi antennas as the omni but I just ingnored him, what else could I say hehe.
When we were installing all the equipment I had a play with different channels and it seemd like CH 1 worked best. The antennas use the cable they come with because the BR-1310 bridges we have installed right beneath the antennas, only the coaxials cables go down to the office to the power injectors.
Please see the attached screenshot from the signal and SNR reading. It seems like we have a little bit of noise. The signal was -61dB to -63dB on the installation day but 2 weeks later it went down to about -65dB.
So, you suggest we rotate both Yagi antennas by 90 degrees correct? I guess one needs to be turned clockwise and another anticlockwise correct? What de we actually gain by doing that? We change the polarization from vertical to horizontal? Could you please explain it to me a little bit more?
Thanks in advance for sharing your experience. I am going to troubleshoot this on Monday so I would be great if you could give me some sugesstions. I thought of changing the Yagi antennas to 19dB direccional flat pannel of 3rd party but with this distance 13,5dB yagi I think are sufficient. Does the "distance" settings on root bridge have impact on the signal sterngth?
One more question, at the moment the 2 connected offices are in the same subnet so to speak in the same broadcast domain. On one site (non-root bridge) they have up to 150 client connections to the servers on the other site (root bridge) but with 20kbps per station making it roughly 3Mbps total bandwidth needed. When they connect all at the same time, our client say the wireless link go. I really don't believe that becasue on the wireless readings we get betwenn 18 and 24Mbps so it should be way more than enough. Do you think by putting both sites in different VLANs would help a little bit so the local traffic would not need to be broadcasted over the wireless link back and forward? Can you shed on that a little bit of your experience? I suspect they have something to do with the switching on local site because when I was pinging the non-root bridge from the local site but connected to a different switch then is connected the Cisco bridge, I got funny reposnses, between 5 and 40ms over ethernet with 10 connections to the remote site over the wireless link but when we pingged the same CIsco bridge from the local site but connecte to the same switch as the Cisco bridge the responses were 1ms. It makes me think that they have some broadcast storming on the local site and that also propagates the wireless link...
Maybe you are looking for
-
IOS 7 is preventing my ford car sync working. The skip track buttons no longer work. Any help.
iOS 7 problems with ford sync. Skip track button no longer works.
-
Hi, I am trying to extract data from multiple CSV files to SQL into a single table. The data type of all the columns in SQL table is nvarchar(MAX). I am able to extract the data from the flat files but some of the data(on extraction) is corrupt incl
-
How to print between head-Tags of a Portal component
Hello, is it possible to print between the -Tags of the generated HTML-Code? I need to insert a JAVAScript between the tags. Currently i am simply using the Writer-Object in the doContent() to print out the HTML-Code. But i found nothing how to acces
-
RWB error: javax.ejb.CreateException XIRWBUSER cannot log
Hi, When I try to monitor the messages processed by my integration server (RWB interface->Message Monitor->is.[instance].[server]), an authorization error occured: "Unknown error: javax.ejb.CreateException: You cannot log on to system [SID] with user
-
NSURLErrorDomain error -1012. What does this mean?
I'm trying to make a call to an OData resource using the OData iOS SDK and every call gives me this error code: The operation couldn't be completed. (NSURLErrorDomain error -1012.) What does NSURLErrorDomain error -1012 mean? Thanks!