I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.

I have a WRT54GC that is hooked properly to the cable modem (adelphia) according to all literature... but, our wireless connection to the x360 is lost anytime we turn off the PC, which shouldn't happen. The router is connected directly to the motor. modem. We can be on line on with the pc and x360 at the same time and we have the internet connection. But both connections will also free from time to time on us. The cable HSI was just installed and we are new to this. Any assistance would be great! I'm taking my laptop home this weekend to see if I can get on wireless with it. Also (sorry) all the lights are working as they should according to the router software, but when I put the cd in ran the wizard, it tells me it can't find the router connected to my pc. I'm going batty with this. Thanks.
MC

Hi ... Mac address cloning is enabled on my router - so I guess that could be a problem, and the filmware version is 1.02.5 - we just installed this thing and haven't done any type of upgrades.
A little history - adelphia didn't connect properly - turning off the pc killed the wireless router connection and then if I hooked right into the cable modem from the pc, I didn't get a connection. So, we unplugged everything and started out fresh following the install wizard and the pc now sees the router. After that, my laptop didn't lose it's connection when the pc was shut down either. So ... the xbox was next. It seems that when we have the WEP enabled, the xbox 360 can not connect to xbox live. We did a media test first it passes the connection to the wireless network and takes the WEP key, but it fails when looking for the IP address. All DHCD information is enabled. So, we disabled the WEP and ran the console test - and it passed. We then did the media test and it obtained the IP address this time, but then failed the media connect (whatever the next test is). Not sure we actually need the media text or just the xbox live test.
I'd like to be able to use the WEP security, but we can't go live when it is enabled.
We are new to this, so appreciate any assistance!

Similar Messages

I am unable to view any of m purchases via the Quick link 'Purchase' option. I do have an account and I am connect to the iTunes store.

am unable to view any of m purchases via the Quick link 'Purchase' option. I do have an account and I am connect to the iTunes store.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
You might also try signing out of itunes and back in (Settings App > itunes & App Store)

I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

I have 2 iPads and neither are connecting to the store

We already have one ipad2 and have bought another - I have set these both up in my name and same payment details but using different apple IDs and passwords.... They were both working well this morning allowing FaceTime and app purchases but both have stopped working when trying to connect to the App Store. I have rebooted both and restarted the broadband router ( although I knew it could not be this as the android tablet we have was working fine and safari on the iPads were letting me connect to the net.) please advise?

Maybe something in one of these two articles will help.
Can't connect to the iTunes Store - Apple - Support
Best Fixes for 'Cannot Connect to iTunes Store' Errors - iPad Insight

Is it possible to have an HP and Canon wireless printer on the same wireless home network?

I presently have a Canon MP560 printer on my wireless home network. I do not have this printer installed on my computer. I purchased an HP 3520e-All-In-One hoping I could have both on my home network. My os is Windows 7 64bit. I tried to install the HP 3520e, and received the following error message - "Your printer failed to join the wireless network", and said the issue was that MAC address filtering may be enabled on my computer, which it is not. It is disabled. Question: Is there a workaround to have two wireless printers on the same network, and if so, what is it? Thank you so much for your help.

Hi,
I actually have 3 printers from 3 vendors on my home network. I have tested using MAC filter and w/o MAC filter, no problem at all. The MAC filter should be on the router, not from your computer. Have you checked that ? My suggestion: use a computer on the network to connect the printer using USB cable then setup from there. The printer will use EXISTING setup from your computer and you won't need to enter security key.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have windows 7 and I can't sign into ITunes. Message says to turn off compatibility mode to use. How and why do I need to do this?

I have Windows 7. I was previously using Windows 98 when I set up ITunes and developed a library of music and movies. When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes. Where and why do I need to do this?

Hi there skinguru,
You may find the information in the article below helpful.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/ts1489
-Griff W.

Help i have an iphone and an ipod connected to the same apple id but i cant seem to transfer my purchases from one device to another the computer says im not authorised but when i authorize it it says its already authorized

iugfutfuk

If only a relatively small number of songs are affected, delete and redownload them if doing so is free in your country. Otherwise, click here and follow the instructions.
(69302)

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Macbook and slow wireless connection

I have trouble reaching high speed when connecting with AirPort to my BT Voyager 2110 router. Connecting with a cable works great.
It seems to be a problem many people have that their wireless connection between the Mac and a router gives only a fraction of the transfer speed compared to when when using a PC and connecting wireless to the very same router. Is Mac more sensitive and have compatibility problems?

I solved the problem I described above. I changed the channel on the router to 11. Tech support told me that Macbook prefers 11, then 2 and then 6. I tried number 2 yesterday and it was still bad. However, channel 11 solved my problems. Now the wireless is fast as with cable.

What do I have to buy for a wireless connection?

I have got a ADSL Broadband connection to the Internet from my ISP, [UK Online] that has a Cable to my DrayTek, Vigor2500v Router.
My router is not wireless. I have a Ethernet cable connected from the router to my G4 iBook, 800MHz. My iBook is AirPort Extreme ready and is without the AirPort Extreme Card. What is the different between AirPort Express and AirPort Extreme?
How can I make my G4 iBook have a wireless connection to the Internet? What do I have to buy for a wireless connection?
G4 iBook Mac OS X (10.3.9) 800MHz; AirPort Extreme ready; 256Mb;

Thanks for your Info, I do understand that I need to buy a “AirPort Extreme card” & “AirPort Express/Extreme base station”.
I have my current Router wired by a Ethernet cable to my G4 Desktop, also have a VoIP connection from my router. So, I want to keep this router and add the “AirPort Express/Extreme base station” to have the wireless connection to a iBook only.
If I understand you correctly, I can disabled the DHCP server on the “AirPort Express/Extreme base station” only, Because I need the DHCP for the connection to my G4 Desktop. Is this what you mean?

I have one apple id, but the family all have ipods, imac and mac book connected to this account. how do i face time them?

i have one apple id, but the family all have ipods, imac and mac book connected to this account. how do i face time from one device to another?

Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G.

I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.

Similar Messages

Maybe you are looking for