I have a problem with my headphone jack and i just bought my macbook pro 10 days ago., I have a problem with my headphone jack and i just bought my macbook pro 10 days ago.
I am having a problem with the jack in for the headphones. I have bought it brand new from a local authorised apple store about 10 days ago. As soon as I plugged in my headphones and tried them, the sound was coming out of one side of the headphone and the plug inside my macbook pro was loose. When i tried moving it the sound was coming out of the device. What can I do?
Take it back to the store you bought it from. It will definitely be taken care of
Similar Messages
-
My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help
See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod -
To follow up on my question. Only because this is the first time I am using this forum.
I have owned the iPad for approximately six months.
I have been using the iPad at home thru my wireless network, no problems.
In addition to my IPad I connect to the intent with my laptop, and my cell phone. No problem.
Suddenly approximately five days ago I have not been able to connect my IPad to the Internet. Laptop and cell phone still connect.
However when I leave my home I am able to connect my IPad from the Public Library and from Starbucks.
Can anyone give me some advice on how to get connected from my home.
Not sure how or when I can expect a response to this problem.
Thanks
Bill
<Email Edited by Host>Thanks, however I am not familiar with the Sleep and Homekey buttons on my IPad.
What I plan to do when I get home from Starbucks is, Settings/general/Reset/reset network
I have rebooted my router no luck.
Am I missing something on not knowing about the Sleep and Homekey?
Thanks,
Bill -
good day. I have a problem is a procedure to change the firmware? I have 5,0,1 but with our SIM only works 5,0,0
onix_76 wrote:
how come? Documents also have on hand to buy as photo and check the box
So what? The second-hand shop you bought it from didn't follow the right procedures. You also didn't follow the right procedures to make sure that iPhone was not in Activation Lock. It's like buying a car for cash but not getting the title signed over to you. It's not your car if you don' have the title. And that's not legally your iPhone if the previous owner's Apple ID is still registered to the device for Find My iPhone/Activation Lock.
Only a proof of purchase from the ORIGINAL retail store would do any good at all. Return the device to where you bought it and demand your money back. If they refuse, either get a lawyer and/or turn in the device to local police. If you're in possession of stolen property, then the cops won't care about where you got it from. -
Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..
well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!! -
I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.
Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done. -
I am looking for anyone in the west Tennessee area using Wild Blue along with Apple IMac who is having a problem with their screen going complelely white every so often. Have had the maching into the Apple store in Memphis. They could not get it to fail. Help
TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams -
I have a problem with my macbook,if I don't have my earphone plugged, I can't listen anything,and start shine a red light .what should I do?
try inserting and removing the headphones in and out of the audio jack. The toggle switch is stuck and your mac thinks the headphones are still plugged in.
-
My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues. -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
I purchased an iPhone 4s on Nov. 20th. I immediately had to update the software to ios 6.0.1. I cannot even get through 1 day without the phone battery losing all power. It loses 10-20% per hour, and that's with apps closed, wifi off, bluetooth off, screen dark, updates current, etc. You can hold the phone in your hand and watch the power go down. It also gets very warm. I have to charge it once or twice a day so I have it when I need it.
I took it in to the Sprint store for diagnostics to see if there was something wrong with the phone. They said the phone is ok, but one of the agents said it's the last update - he has had problems ever since. He said he thought they are working on fixing it & we should be getting another update to fix it. Is this true? I sure hope so! They also showed me how to reboot the phone, especially when it gets so warm. Is there anything else I need to do? Please help!
This is my first iPhone and I am very frustrated and disappointed in Apple. If it's the software, I would think they would be frantically trying to fix it. This phone was not the cheapest phone, so the battery life should be better!After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743 -
In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?
Hit the '''F7''' key, you probably have Caret browsing turned on.
http://kb.mozillazine.org/Accessibility.browsewithcaret -
I am new to the MAC world but I am very familiar with Lightroom on a PC. This weekend I was weeding out the pics I do not want on my MAC and now I have a ? by all my folders. How do I recover/get back to where I was 2 days ago?
These instructions will help you fix the problem: Adobe Lightroom - Find moved or missing files and folders
-
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
I have tried for days to up-date iTunes genius with no luck at all... HELP!
Virtually all the music in my iTunes library is in sync with the iTunes Genius function, except for the *NEW* music that I installed 5 days ago.
There were no problems loading the music on to my computer and every one of those tracks play beautifully in iTunes.
The problem I have is when I go to up-date genius. ITunes gathers all the new information then transmits it to Apple. Then it says “Waiting for Apple to deliver your Genius results…” What happens then is, slowly, but surely Apple fills in the result info onto the time-line bar at the top of my screen until it fills completely. There it stays filled completely for HOURS, still those music files says “No Genius Suggestions”.
I have done this repeatedly for 4 DAYS, waiting for HOURS each time for Apple to up-date those tracks with no success.
Please, if you can I could use someone’s help…
My laptop is a Dell Precision M6400 and my OS is Windows Vista Ultimate (service pack 2). I have 4gig of RAM & my system type is 32-bit Operating System.
The iTunes version that I’m running is VERSION 12.1.1.4
Thank you for your time…Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.
Maybe you are looking for
-
Variables reset and memory management
Hi, I'm writing an application that works on sophisticated data-structures, and though rely a lot on memory allocations. As I wanted to do a clean job as much as possible, I divided the work in different modules, and I'm encou
-
Why can't I view SHTML files in iOS 7?
I often receive emails with SHTML files as attachments. With iOS6 and earlier versions, these opened just fine in the Mail app. But after updating to iOS7, no dice. I'm given options to open the attachment in Dropbox or Google Drive but neither of th
-
Getting deep on Entities EJBs life-cicle... need some undertanding!
Hi, i got a question over an Entity EJB (BMP or CMP as they life-cicle is pretty much the same) life-cicle. I've search over some books and there's a step that all of them seem to miss (or just don't be to explicit). There are 3 stages for an entity
-
Why is it slower to boot up and shut down
For the last few months, at least since I updated to Mac OS 10.7.3 (this may not be related), I have noticed that the boot up sequence is a lot longer (4 to 5 times) than it used to be. Although not as extreme, the shutting down sequence is also tak
-
SmbServer: could not create socket: Address already in use
When I start SmbServerAgent, it fails again and again. In SmbServer.log there exists "SmbServer: could not create socket: Address already in use," but SmbServer was already shutdown. How do resolve such issue? Thanks a lot. ergent