I have a problem with my ipod. it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes
it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes. Please Help
Place the iPOd in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
i need help! >: it been weeks
Assuming your Itunes is working without problem, use Windows Explorer, right click the music file and choose "Open With", then "Choose Default Programs...", then Itunes and OK.
-
All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?
You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
/Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/2c232f1e4d12129e
/System/Library/Frameworks/v.framework
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
Hello I have a problem to update Imovie. I want to update but I get "There is a billing problem with a previous purchase" What do I do?
Restore from iTune Backup
1. Settings>General>Reset>Erase all content and settings
2. You will be asked twice if you want to erase iPad
3. Slide to set up
4. Select Language
5. Select Country
6. Enable Location Service
7. Choose Wi-Fi Network
8. Enter Wi-Fi password
9. (a) Setup as new (b) Restore from iCloud Backup (c) Restore from iTune Backup
10. Select "Restore from iTune Backup"
11. You will be instructed to connect to iTune (computer)
On computer
12. Two options offered
13. (a) Set up as new iPad (b) Restore from backup (a list of backup will be shown)
14. Select Restore from backup and select the backup
15. Continue
16. Restoring iPad from backup
17. The settings for iPad restored -
So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New. -
The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
My daughter set a passcode on her home screen so her brother could not get into it. Now she has forgot the passcode. How do we get it unlocked
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Hello, i have a problem. My boyfriend has got an iPhone 3gs but we have a problem, we don't know how to get iMessage on his phone. Do you know how we could do ?
Then you should have iMessage. Go to Settings > Messages to turn it on and set your Receive At address. Note that iMessage uses the Messages app... standard texts are gree, iMessages are blue.
http://support.apple.com/kb/HT3529 -
PLEASE HELP my iphone 4s is frozen on the apple logo and my lock button is broken so i cannot reboot. Ive tried plugging in to charger and computer onto itunes but neither have worked..:(
You have to make an appointment with the genius bar at your local Apple Store for an evaluation.
-
''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)
Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore -
My display says iPod is disabled connect to iTunes. When I connect to iTunes, a prompt displays stating that the iPod is protected by a passcode. How can I enter the passcode if the iPod is disabled?
THis page directly addressed the problem of the persistent "connect to iTunes" screen and passcode issue:
http://support.apple.com/kb/HT1808 -
I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.
I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students!
Maybe you are looking for
-
How to export photos from aperature to an sd card
I am trying to export photos from Aperature 3 to an SDHC card to transfer to Ipad 2
-
Wireless mouse and Keyboard Issue after closing the lid - external display
Can anyone give any insight. Recent purchase of a new Late 2008 15" MBP. I have connected it to an external 24" Apple monitor on my desk and use a wireless mouse and wireless keyboard on my desk top. I have configured the laptop to wake on bluetooth
-
Can't access some websites using time capsule
Everything has been working just fine with my time capsule and my imac and just today I couldn't access some websites for some reason. I tried many other sites including this one and can get to them no problem. I have been through all of the airport
-
is scheduling only possible with adhoc reports? is there any other type of reports i can schedule?
-
'' WHY DO I GET THIS NOTIFICATION '' CONNECTION TIME OUT'' ?
i'm using a mac ox mountain lion and it usually asks me for updates, when i try to update it directs me to app store and it starts checking for updates but after a few minutes no results come and i get a notification saying ''connection time out'' .