I have a time capsule and airport express one floor lower, the signal keeps dropping. Would an airport extreme give me a longer range for wifi?

I have several computers. My equipment is upstairs in a house, apple time capsule and downstairs airport express. Lately the downstairs computer keeps disconnecting from the internet. Would replacing the airport express with and airport extreme give me a greater range for my wifi connections?

Yes. Question is... would the difference be enough.
The extreme has a bigger & more powerful antena array. But if that alone still doesn't suffice, you also have the option to use the express to EXTEND from the Extreme.

Similar Messages

When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
We also have two iPhones that do use our local wireless network on occassion.
We have stereo speakers that are currently connected into one of the Airport Expresses.
For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express). Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each). So far, here's what we've tried to do:
(1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house. They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely. Spent a couple of hours setting everything up. No dice.
(2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
(3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu). The computer does this at random intervals on a regular basis. The skipping, however, will occur even if the menu is not selected.
(4)     Here's the weirdest part. The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down. In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals. In this situation, the skipping only seems to occur when the menu is selected.
At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it). But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem. I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
Any help would be most appreciated!

Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

I have a Time Capsule and it is flashing amber. The airport utility says that there are no DNS servers. How do i fix this?

I can still connect to the wifi signal with my computer but it won't stop flashing amber until i fix this issue

Have you configured the wireless on the Time Capsule? Do you have the wireless port enabled on the computer? Are you connected to the wireless network of the Time Capsule?
In Airport Utility using the Wireless panel here's what it looks like on my AEBS:
In your Network preferences you should see:
There should be a valid IP address for IPv4 that should begin with 10.0.1.

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal. In this type of setup, each Express communicates directly to the Time Capsule.
How did you setup the AirPort Express devices?
What version of the Mac operating system are you using on your MacBook? Or, do you have AirPort Utility installed on your iPad?

I have 1TB time capsule and i need to back up more media. Can i also use a 3TB time capsule asswell?

i have 1TB time capsule and i need to back up more media. Can i also use a 3TB time capsule asswell?

You can, but it is not possible to continue backups "seamlessly" from one Time Capsule to the other.
Time Machine will make a new complete backup of each Mac on the first pass when you connect the new 3TB Time Capsule.

Older Airport express won't see the signal from the cable modem.

Older Airport express won't see the signal from the cable modem.
My macbook sees the AP express and I can stream music to it but no internet. If I plug the ethernet cable directly into the macbook I can see the internet

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. HELP

I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.

Well Authorize the Computer...........

I've had a new hard drive installed and reloaded all my stuff via time capsule and now can't connect to the internet although it say Airport is connected. How can I fix this problem ?

Just had a new hard drive for my iMac and reloaded all my stuff via time capsule, all works fine apart from Safari which won't connect to internet. Airport is connected but each time Safari comes back saying there is no connection....any help gratefully recieved.

So you have the apple rotuer called a time capsule and you have complete the frist time machine back up? but there is not internet access ?
If so.
Opem airport utiltiy on your Comptuer :
What is the IP ? > if its 169.254.xx.xx > its a self assigned
Try power cycling the Internet source for up to 1 mintue and make sure all the lights turn off.
In Airport Utility Version 5.5.3 / 5.6.1
Gi > Intenret > conncetiong sharing > Is it off bridge mode change it to share a public Ip address
In airport Utility version 6.0/6.1
Edit > network > rotuer mode : Should be DHCP and NAT unless you use PPPoE to conecnt to the internet then this is automatically invoked.

How does one transfer only 1 of 4 backups from an old TIme Capsule to a new one, such that the 1 on the old TC can be deleted to save space?

I have a 2-TB TC that currently backs up 4 Macs, which is full - no more space to backup, down to less than a year's worth of backup for one Mac, so I don't want any more old backups deleted.
I bought a new 3-TB Time Capsule, and wish to move only one of the the 4 backups to it, which is currently over 1 TB. The idea is to free space on the old TC for the other 3 Mac backups. Also the two TCs may end up in 2 different locations soon.
I read about how to do this at Apple and at pondini.
Upshot was that I copied over the one sparsebundle using Finder drag/drop from the old to the new TC.
When I go to Time Machine preferences to Select Disk, then click the new TC, and Use Disk, I get this dialog:
I don't want to Use Both.
I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
Tom

tomath2o wrote:
I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
I assume you selected the new Time Capsule? If in doubt, and for future clarification, you might want to rename the Data folder on one or both TCs via Airport Utility. Click it on the Disks panel to change the name; then that name will appear on the selection window, etc., so you'll always know which is which:
In any event, the prompt means "Replace (the old) "Data" as the destination for this Mac's backups." It will not touch either the new or old sparsebundle -- future backups will just be directed to the selected location(s). Do note, however, that when you change destinations, the TM Prefs window will show "None" for oldest and latest backups. Don't be alarmed -- that's just TM being lazy and not checking the actual backups yet. See #B3 in Time Machine - Troubleshooting.
See Time Machine - Frequently Asked Question #34 for details on backing-up to multiple destinations.
By the way, just for future reference, another option would have been to connect a USB drive to the existing TC (that's what "S.TM.Backups" is in the sample}.
How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
Click Replace "Data".
Message was edited by: Pondini

Can I have two Time Capsules and back up to both?

Would it be possible to have two TC, one at each end of the house and have them share the same network wirelessly? And allow backup to each one independently, so as to have duplicate backups on two units?
Thanks,
Richard

It may be possible with some work-arounds, but I wouldn't recommend it (time machine or apple doesn't support something like this). Backing up wirelessly and duplicating that backup wirelessly will take an incredible amount of time.
I'd set up the time capsule as your main base station and use another airport (like the express) to extend the signal if you're having wireless connection issues.
To make backups of the time capsule drive, the best thing to do is to plug a usb hard drive into it and use the archive function in airport utility. This copies the time capsule disk to the external drive which you can then move to another location.

Time Capsule and all in one printer HP Photosmart C4280

Hello,
I recently got me a Macbook pro finally. Its awesome!! I love it. Im looking to get Time Capsule or something like that. I want to be able to hook my printer up to something and print from other room. I want to print wirelessly...the scanning and copying feature really doesnt bother me not to have.
Any know if the Time Capsule works with the HP Photosmart C4280. I got this printer with my computer. Its a multi function printer.
The backup feature is neat, but its not as important to me...Im sure it will be if I never lose my hard drive.
Anyone have any advice? Anyone have the HP Photosmart C4280 printer running on time capsule or any other wireless device in order to print wirelessly? Thanks
Amy

Hi Amy,
It should work just fine as a printer. I have a similar setup, and printing works, but I can't scan or fax across the network.
I'd probably recommend the Time Capsule over an Airport Extreme- your MBP can use it for Time Machine backups- untethered!
I've got one on order for our Mac notebooks.
Oh yeah: we have an HP Printer, too. Works fine.
If you price out 500GB and 1TB drives and wireless N routers, I think you'll see that Time Capsule is a pretty good deal.
Enjoy your new Mac!
Message was edited by: Seanessy

Time Capsule and all in one printer HP Photosmart C5580

How can I get the HP Photosmart C5580 working fine with time capsule?
It prints but do not anything else, like scanning, etc...
Thanks in advance,
AZ

Bob,
I am having a similar problem as this person. I have a HP Photosmart 3210. I figured out that I could not use the scanner with the USB on the Time Capsule so I connected the printer via the ethernet port on the Time Capsule to make it a networking printer. This allowed me to see the printer and scanner, but I still can not get the scanner to work. I have all the software updates for Mac and HP. When I go to scan the software says "Trying to Open session with device" and after 30 seconds it will say "Failed to open session with device". I know the software works because if I connect the printer directly into my compute with USB everything is good. Also, if I go into the Embedded Web Server (while printer is connected to Time Capsule with Ethernet) of the printer I can perform a Preview and I will see the scan of the item in the scanner, but I still can not scan. Any ideas? I have to talked to both HP and Apple without any ideas.
Thanks

Time capsule and router will not work

I have a time capsule and needed to take it into the Apple store. Upon setting up again I can not get access the internet. the computers recognize the network but will not connect to the internet.

You have described the problem.. but we have no idea of the setup which you have..
So please tell us.
What modem you have? Make and model?
What router is working as the main network router?
How is the TC connected into the network?
Please post a screenshot of the current setup of the TC from airport utility as that tell us more than anything.

Attempted to set up an HP wireless printer and my whole network is now a mess. HP help told me I had too many signals, as I have a Time Capsule 4 Macs and 4 Airport Express set up. Anyone else figure this out?

I attempted to set up a new HP wireless printer. It is unstable and HP support says I have too many devices since I have a time capsule and 4 airport express either extending my network or being used for a different printer or stereos. Anyone else find that their Airport Express/Extreme interferes with a wireless printer. If so, what's the point?

I have a similar model, the HP 8500A here in the home office that I originally hooked up using wireless on an AirPort system consisting of an AirPort Extreme, Time Capsule and 2 AirPort Express devices.
The HP was originally hooked up to the "main" router using wireless as a test to see how wireless would perform. No issues with setup or performance over the first few weeks. I did eventually change the device to connect using Ethernet once I had room to move the device near the AirPort Extreme.
HP is pulling your leg with the advice about too many devices. The AirPort Extreme and Time Capsule will handle up to 50 wireless devices. In my case, I did nothing except follow the setup procedure and restart the entire network....something that I always do when I make any change to the network.

Please i need some help time capsule and airport express wireless extender

hello everyone and thank you for looking at my post. i do need some help. i am not very good at the computer programing so i might not use the right terms. i have a time capsule that i just replaced an old pc type router with. i have a fairly large house and can not get wireless signal to the one end of my house. so i went to the apple store and bought an airport express after being told how its just plug and play and itll setup with my time capsule and waala iv just extended my wireless signal. well it did not seam to work that well for me. i have done all the setting up that was told me to in the book to do and i still have get to get a wireless signal out of the express i then hooked up an ethernet wire from the express to my girlfriends macbook. and what do you know now im seeing the express in my airport utility. but then i unplug the ethernet and im back to not seeing the express. what am i doing wrong and what do i need to do. please help me if you can. thanks alot.

Hello fastuca. Welcome to the Apple Discussions!
Let's double-check your base stations' settings ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the Time Capsule (TC).
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the 802.11n AirPort Express Base Station (AXn) that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility)

I have a time capsule and airport express one floor lower, the signal keeps dropping. Would an airport extreme give me a longer range for wifi?

Similar Messages

Maybe you are looking for