I have a web service that I am trying to use an MDB with.

I have a web service where I request using soapUI, and the the response from the soapUI that I get is correct. However, in addition to this "regular" program flow, I am sending data to a queue where 2 things should happen:
1. my message should get put in that queue....(not a problem I think, it's says it can connect and send to this one)
2. a MDB should get triggered, but isn't, and the MDB should start it's own program flow after this.
this is the basics as to what is happening in my program, and I get this error below on the end of the output. so would anyone have any theories as to what might be wrong?
ApplicationDispatcher[] Servlet.service() for servlet HandlePrecompiledJsp threw exception
com.sun.enterprise.tools.guiframework.exception.FrameworkException: Unabled to handle pre-compiled JSP '/jsp/LogDetail.jsp'. Expected pre-compiled classname: 'org.apache.jsp.jsp.LogDetail_jsp'.
at com.sun.enterprise.tools.admingui.servlet.HandlePrecompiledJsp.doPost(HandlePrecompiledJsp.java:59)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.GeneratedMethodAccessor56.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
at com.sun.enterprise.tools.guiframework.view.DescriptorViewHelper.execute(DescriptorViewHelper.java:316)
at com.sun.enterprise.tools.guiframework.view.DescriptorViewBeanBase.execute(DescriptorViewBeanBase.java:192)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
Caused by: javax.servlet.ServletException: com.sun.enterprise.tools.guiframework.exception.FrameworkException: java.lang.reflect.InvocationTargetException while attempting to process a 'beginDisplay' event for 'LogDetail'.
at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:830)
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:763)
at org.apache.jsp.jsp.LogDetail_jsp._jspService(LogDetail_jsp.java:126)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at com.sun.enterprise.tools.admingui.servlet.HandlePrecompiledJsp.doPost(HandlePrecompiledJsp.java:57)
... 67 more
Lavanya

You cannot gift to another country at all.

Similar Messages

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?

I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.

Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M.

Problem with web service that returns an object with a String that have som

Hi everybody:
I have a problem with a web service I am doing, I have made a web service that returns a collection of objects, the objects have a set of properties, there is one property that is a String,this property consists in a text fragment that could have some characters that are considered special in XML like &, <, >, " and that's why when I execute the service from a client an exception is thrown:
{code}
Exception in thread "main" org.codehaus.xfire.XFireRuntimeException: Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
at org.codehaus.xfire.fault.XFireFault.createFault(XFireFault.java:89)
at org.codehaus.xfire.client.Client.onReceive(Client.java:410)
at org.codehaus.xfire.transport.http.HttpChannel.sendViaClient(HttpChannel.java:139)
at org.codehaus.xfire.transport.http.HttpChannel.send(HttpChannel.java:48)
at org.codehaus.xfire.handler.OutMessageSender.invoke(OutMessageSender.java:26)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:79)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:114)
at org.codehaus.xfire.client.Client.invoke(Client.java:336)
at org.codehaus.xfire.client.XFireProxy.handleRequest(XFireProxy.java:77)
at org.codehaus.xfire.client.XFireProxy.invoke(XFireProxy.java:57)
at $Proxy0.search(Unknown Source)
at cu.co.cenatav.webservices.client.Client.main(Client.java:26)
{code}
I know that this is happening because special characters are sent by the soap message but I don't know how to solve this problem.
How could I avoid this exception ?
I hope you can help me.
Regards.
Ariel

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

How to call a web service that is managed by web services manager from omni

Ok gurus... here is an interesting one for you.
We have a set of web services that are deployed to our server. We have Oracle Web Services Manager deployed to another server and is acting as a gateway to our web services.
We would like to call our web service and pass it the username and password that were specified in the omniportlet connection information screen. How do we go about doing this?
PS. We are using the latest version of portal (10.1.4).
Thanks for your help.
Cheers,
Cory

Just a follow up. What I would like to do is to have omni portlet add standard header information for security such as the following:
<soap:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken xmlns:wsse="http://docs.oasis-open.org/wss/200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Username>theusername</wsse:Username>
<wsse:Password>thepassword</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
Any ideas on how to get omniportlet do this? Any ideas on where to look for the answer? Oracle dudes: Any plans to add this to future releases?
Thanks again folks :-)
Cory

BPEL build error when invoke an extrenal Web Service that returns an Array

Hello,
I built with JDeveloper a web service that returns an Array of Java Bean classes and I try to invoke this web service from a BPEL process. The wsdl file is automatically generated by the JDev. When I built the BPEl project I obtained the following error:
[bpelc] [Error] :-1:-1: src-resolve.4.2: Error resolving component 'SOAP-ENC:Array'. It was detected that 'SOAP-ENC:Array' is in namespace 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespace are not referenceable from schema document 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'. If this is the incorrect namespace, perhaps the prefix of 'SOAP-ENC:Array' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'.
[bpelc] [Error] :-1:-1: src-resolve.4.2: Error resolving component 'SOAPENC:Array'. It was detected that 'SOAPENC:Array' is in namespace 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespace are not referenceable from schema document 'http://malangiu-ro:8988/cde-Project-context-root/Top300FactoryWS?WSDL'. If this is the incorrect namespace, perhaps the prefix of 'SOAPENC:Array' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'http://malangiu-ro:8988/cde-Project-context-root/Top300FactoryWS?WSDL'.
[bpelc] [Error] :-1:-1: src-resolve.4.2: Error resolving component 'SOAP-ENC:Array'. It was detected that 'SOAP-ENC:Array' is in namespace 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespace are not referenceable from schema document 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'. If this is the incorrect namespace, perhaps the prefix of 'SOAP-ENC:Array' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'.
Any hint? Thanks in advance!
Regards,
Marinel

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

Can I use third party web services that communicate via http-post with webui builder?

Hi,
I have 5 computers (services) that are controlled via http-post. 3 of these services are implemented as labview webservices, 1 is labview socket (with python http-wrapper) and the last one is implemented with c# (lighttpd + cgi).
Can I use webui builder to controll all of them? Or, what is the simplest change so I can use webui builder?
What I would like to do, is to change the current javascript-UI to labview-webui. For the interfaces implemented with labview webservices, this is not a problem. For non-labview services, I don't know if it is even possible.
br,
Juha

To add to Mike's answer, the only caveat is that the server needs an appropriate clientaccesspolicy.xml file at the root level (http://yourserver/clientaccesspolicy.xml), or a completely open crossdomain.xml file, for the editor and built apps to be able to communicate with it. There's a help topic which explains this in the context of LV web services, but it's true for Web UI Builder to be able to communicate with arbitrary web servers also.
Since it sounds like you control all the web servers in question, it shouldn't be too difficult to get this file in place, though.

Calling a web service that uses DIME

Can ColdFusion interact with a web service that uses DIME? Has anyone worked with that?
Thanks.

CF doesn't support DIME "natively", but Apache Axis does, and that's the library that CF uses. So, you'll have to drop to Java to do this.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Can a web dynpro call a web service that calls a jsp?

I'm trying to connect a web dynpro java [2004s] calling a web service that calls a jsp page. then a jsp page that calls a web service that goes to the web dynpro. is this possible?
Thanks!

Have you checked out the following J2EE tutorial:
http://www.netbeans.org/download/docs/41/j2ee-tutorial/CMP2.html#wp90149
...The Roster module maintains the team rosters for players in sports leagues. The example has five components. The RosterClient component is an application client that accesses the RosterBean session bean through the bean's remote interfaces. RosterBean accesses three entity beans--PlayerBean, TeamBean, and LeagueBean--through their local interfaces....
Also: http://www.netbeans.org/download/docs/41/j2ee-tutorial/Session4.html#wp82980
Passing an Enterprise Bean's Object Reference

Web Service That Return A Table

Hello,
Does Someone Know A WebService Witch Return Or Have A Parameter That Is A Table
Thank You For Your Answers

Hello,
Maybe this links will give you a hint.
/people/thomas.jung3/blog/2005/01/05/develop-a-web-service-that-sends-an-email--in-abap
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
Bye
Gabriel P.-

Problem running Web Service that uses OracleXMLSave on Oracle AS 10.1.3

I am trying to deploy a Web Service that uses OracleXMLSave. The service was built in Jdeveloper 10.1.3 and is deployed to 10gR3 AS. I have all the utitlites available from the 10g Production XML Developers Kit installed . The code compiles and generates correctly . I then deploy to an EAR file that inlcudes the applicaiton code and also all the XDK libraries . No problems so far. But when I run the app, I get an exception like the one below. It says it can't find XMLType . The funny thing is that this library (xdb.jar) and all other related libraries are there in the EAR file . In fact the class loader seems to see it because the exception says that it is there (see text below).
I have added all the libraries from XML Developer kit like xdb.jar , xsu12.jar , etc. I have also verfieid that the files are selected in the WebServices.deploy file and also present in the EAR file . (See full list below the eror message below. ).
It looks like for some reason the class loader can't load the class even though it seems to know that the class exists in the path.
Been sweating on this for a while (probably staring it at too long :) and would really appreciate some help.
This is the exception thrown when the OracleXMLSave Class is called for the first time.
Missing class: oracle.xdb.XMLType
Dependent class: myXML.DbXMLSave
Loader: TEAMWEBSERV.web.WebServices:0.0.0
Code-Source: /D:/OracleAS10gR3/j2ee/TEAMWEBSERV/applications/TEAMWEBSERV/WebServices/WEB-INF/classes/
Configuration: WEB-INF/classes/ in D:\OracleAS10gR3\j2ee\TEAMWEBSERV\applications\TEAMWEBSERV\WebServices\WEB-INF\classes
The missing class is available from the following locations:
1. Code-Source: /D:/OracleAS10gR3/j2ee/TEAMWEBSERV/applications/TEAMWEBSERV/WebServices/WEB-INF/lib/xdb.jar (from WEB-INF/lib/ directory in D:\OracleAS10gR3\j2ee\TEAMWEBSERV\applications\TEAMWEBSERV\WebServices\WEB-INF\lib)
This code-source is available in loader TEAMWEBSERV.web.WebServices:0.0.0.
2. Code-Source: /D:/OracleAS10gR3/j2ee/TEAMWEBSERV/applications/TEAMWEBSERV/WebServices/WEB-INF/classes/ (from WEB-INF/classes/ in D:\OracleAS10gR3\j2ee\TEAMWEBSERV\applications\TEAMWEBSERV\WebServices\WEB-INF\classes)
This code-source is available in loader TEAMWEBSERV.web.WebServices:0.0.0.
[oracle.classloader.util.AnnotatedNoClassDefFoundError]
List of libraries :
<list n="exportedReferences">
<hash>
<value n="id" v="Dms.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Log4j-1.2.9.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Mail.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="NetComponents.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oc4j.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ocrs12.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdbc14dms.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdl.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oraclexsql.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Orai18n.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="ADF Model Runtime"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="ADF Model Generic Runtime"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle XQuery"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle XML Parser v2"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle JDBC"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oracle SOAP"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Dms.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Log4j-1.2.9.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Mail.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="NetComponents.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oc4j.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ocrs12.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdbc14dms.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Ojdl.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oraclexsql.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Orai18n.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xdb.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xml.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlmesg.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlparserv2.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xschema.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xsu12.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Classgen.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Jdev-rt.zip"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Oraclexsql.jar2"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Transx.zip"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xdb.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xml.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlcomp.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlcomp2.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmldemo.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlmesg.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xmlparserv2.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xschema.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xsqlserializers.jar"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Xsu12.jar1"/>
<value n="isJDK" v="false"/>
</hash>
<hash>
<value n="id" v="Orai18n.jar2"/>
<value n="isJDK" v="false"/>
</hash>
</list>

Well I got the EJB lookup working but only when I changed the Provider Url to the pre-10.1.3 format e.g. ormi://someserver:12421/someapp and used jazn.com/oc4jadmin as the username. After reading the online documentation, I didn't think this should work!
Another issue I am having is casting a datasource returned from a JNDI lookup for a datasource. We used to do the lookup in the code and cast to an OracleDataSource. Now it is throwing a class cast exception to ManagedDataSource. Is there a quick and easy solution to this? I really don't want to have to go into the code and change this cast so it'd be great if we can get this working without changing code. This code has been working in a prod environment for two years now on 9.0.3 -> 9.0.4...

Web service that streams a clob to the calling application

I need to produce a web service that streams a clob to a calling application: what I have currently is a web service that contains calls to htp, thinking this would serve as a way for a user to download a clob from the procedure that the web service is based on (see Trouble calling htp in a web service procedure
I can't get that approach to work at all, so rather than repeatedly bang my head against the wall I'll raise the following question: is there a standard approach whereby a clob can be streamed to the application consuming the web service? Note that I have limited myself in that I'm consuming the WS using APEX - APEX would like to store a returned value from a FUNCTION web service in a page item or a collection, but I will need to be returning very large CLOBs at times, so this is not an option.
I'm sure there must be examples of web services being used to return large streams of data returned by stored procedures but I can't seem to find them Could anyone point me in the right direction?

Ok, I've had to change tack. I've now recreated the web service and have handled the large CLOB as a streaming attachment: this performs well when running the test in Enterprise Manager as it returns a big CLOB very quickly. My problem is consuming this big SOAP message. I have tried calling this web service from a PLSQL procedure shown below but I get the following error:
ORA-29541: class XMLDBMASTER.oracle/jpub/runtime/dbws/DbwsProxy could not be resolved
When testing the WS there is obviously a automatically generated stub that will handle the returned SOAP message and it's streaming attachment. How is calling this from a DB procedure different, must I supply a proxy to the procedure manually?
Please, if anyone has any clue could they give me a shout? (Procedure below)
PROCEDURE run_ws (p_resid IN VARCHAR2,p_filename VARCHAR2, p_filter_str IN VARCHAR2)
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_result ANYDATA;
l_wsdl_url VARCHAR2(1024);
l_service_name VARCHAR2(200);
l_operation_name VARCHAR2(200);
l_input_params UTL_DBWS.anydata_list;
v_mime VARCHAR2 (48) := NULL;
v_length NUMBER;
v_clob CLOB;
v_file_name VARCHAR2 (2000);
v_buf VARCHAR2 (32000);
v_amt NUMBER := 4000;
v_pos NUMBER := 1;
BEGIN
l_wsdl_url := 'http://ltp003357.sepanet.sepa.org.uk:8888/getXMLclob/getXMLclob';
l_service_name := 'getXMLclob';
l_operation_name := 'getClob';
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_name);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => NULL,
operation_name => l_operation_name);
l_input_params(1) := ANYDATA.ConvertVarchar2(p_resid);
l_input_params(2) := ANYDATA.ConvertVarchar2(p_filename);
l_input_params(3) := ANYDATA.ConvertVarchar2(p_filter_str);
l_result := UTL_DBWS.invoke (
call_handle => l_call,
input_params => l_input_params);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
v_clob:=ANYDATA.AccessClob(l_result);
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Content-length: ' || v_length);
HTP.p ('Content-Disposition: attachment; filename="' || NVL('user_test','user_query.xml') || '"');
OWA_UTIL.http_header_close;
BEGIN
v_pos := 1;
LOOP
DBMS_LOB.READ (v_clob
, v_amt
, v_pos
, v_buf
v_pos := v_pos + v_amt;
HTP.prn (v_buf);
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
END run_ws;

Web Service that is neither servlet nor EJB

Hello,
I would appreciate if someone can clarify the following for me:
If I want to implement a Web Service using Java, it seems the server MUST be either a servlet or an EJB. It cannot be a standalone Java class.
This makes sense because Web Services rely on HTTP, and therefore on the server side we need a HTTP server that recieves the SOAP-on-HTTP message and passes it to the appropriate URI (a servlet or an EJB).
But what if I want to implement my web service outside of a servlet container and outside of an EJB container? Are there no tools and libraries out there that can provide some of the functions that a HTTP server provides - thus enabling me to transform my standalone Java class into a web service.
If we can have standalone web service clients (i.e. not contained in a J2EE container), why can't we have standalone web service servers?

This makes sense because Web Services rely on HTTP.This statement is not fully correct.
For example, using Axis you can write a Web-service driven by JMS.
To run a JMS-driven web service on Axis, you dont need a J2EE container or web server.
It can run as a stand-alone program.
Ajay

Invoking a web service that returns binary

Hi,
Is it possible to invoke a web service that returns a binary object?
Its similar the following example but I need to return a binary object :
declare
v_url:='http://www.somesite.com/function_name?invoke=placeOrder&par1=val1'
v_output varchar2(4000);
begin
select utl_http.request(v_url)
into v_output from dual;
end;
Thanks in advance

No "advantage" as there are two very different tools.
UTL_HTTP is basically an Oracle PL/SQL web browser. It uses the HTTP application protocol. It is just like your ordinary browser (IE, Firefox, Opera), but as it is server-side and display-less, it comes without a rendering engine.
UTL_DBWS is to interact with web services using the SOAP application protocol.

Not able to consume Web Services that are in Service Registry

Hi Experts,
I am trying to consume the web services that are published into the Service Registry of CE 7.1 Server.
Previously, I was able to consume the web services.But now I found the following error in VC Console, When i try to consume the same web services or even other web services that are there in that server.
"(E) Error in Search: Unknown error has occured in service execution"
Please help me to solve this issue.
Thanks,
Regards,
Palani

Hi Palani,
I guess the first 2 things you may want to test are:
1. Is the Webservice reachable? please try and run the webservice URL in your browser and see if you get the xml file.
2. Proxy settings - please see that the proxy settings on the server are defined properly.
Hope this helps.
Regards.
Omer.

I have a web service that I am trying to use an MDB with.

Similar Messages

Maybe you are looking for