I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill f

I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill forms?

Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/

Similar Messages

  • What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

    what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

    iCloud Mail Settings

  • When is the new macbook air coming..?? and what are the probable updates, both software and hardware..??

    When is the new macbook air coming..??
    and what are the probable updates in both softwares and hardware..??

    SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:Speculations or rumors about unannounced products.
    You'll want to ask this question elsewhere. "Management" on these boards don't want these topics.

  • What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
    Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
    Some telltale signs that an AirPort has (or is about to fail):
    Status lights are not illuminated or do not match any of the known configurations.
    Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
    Unit refuses to intialize, even after performing multiple "factory default" resets.
    Weak or no wireless signal.
    Ethernet port(s) not functioning
    Etc.
    Also, are there any compatiility issues with newer models and G5/G4s?
    Three potential issues:
    Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
    Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
    Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

  • Does the IHandy flashlight app contain malware? ? If so what are the removal steps to insure the malware is removed??

    Does the anyone know if the IHandy flashlight app contain malware?? If so what are the removal steps to insure the malware is removed??

    There is no malware that can affect an iPhone unless it's been jailbroken.
    Some apps request to do things, like access your location or contacts, and can continue to do so in the background. If this app requested permission for either of these things, you should delete it. A flashlight app has no need for such information.
    ~Lyssa

  • When I try to connect to the web using the larest version of firefox, it tells me the Proxy Server is refusing connection. When I reinstall an earlier verion it seems to work fine!!! What's the Problem?

    Downloaded Latest version 3 6.?? .12
    Next time I tried to connect to the Web the Proxy server refuses connection & tells me to reconfigure my settings.
    I reinstalled the older version, which worked OK, then uploaded the latest version again & it does the same thing when I log off & try to reconnect!

    Other things that need attention, see http://www.mozilla.com/plugincheck/
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r22
    # Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • What are the Models for all iPod touchs in iOS? And what are the Model Numbers on the back of the all iPod Touch

    I'm trying to figure out what is the Model in iOS for the iPod Touch 1st Gen to iPod Touch 3rd gen, also I'm trying to figure out the model number on the back of it, are you able to check the Model in iOS to see what Gen? Or what is that for?

    Here you go, http://support.apple.com/kb/HT1353

  • SQL Cluster 2014 installation error the following is the right solution ? if yes why ? if not what are the pros n const of this ?

    http://www.bradg.co.za/?p=12
    SQL 2008 R2 Install Permissions
    SQL 2008 R2 is a little tricky to install if you don’t have the right permissions.  If the account you are using does not have the correct permissions you will find yourself getting loads of strange errors such as below during the installation.
    not all privileges or groups referenced are assigned to the caller
    The process does not possess the ‘SeSecurityPrivilege’ privilege which is required for this operation
    The error will prompt you to retry or cancel.  If you cancel your SQL installation will fail and if you retry you will be prompted with the error again.
    The way to resolve this issue is to grant the account you are using the correct privileges.
    Local Administrator on the box you are installing SQL
    Goto > Local Security Policy > User Rights Management
    Back up files and directories
    Debug Programs
    Manage auditing and Security log
    Restore files and directories
    Take ownership of files or other objects
    Add your installation user account to the above User Rights Management
    Once this has taken affect you should be able to install SQL without any issues.

    I might render OK in browsers, but the code is riddled with errors.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.incredibleart.org%2Flinks%2Fa rtists_black.html
    This one looks like it could be your red herring.
      Line 111, Column 83: cannot generate system identifier for general entity "f.defaultView.getComputedStyle"
    Nancy O.

  • What are the production and marketing concepts of Apple?

    What are the production and marketing concepts of Apple?

    FelixWinter wrote:
    What are the production and marketing concepts of Apple?
    To produce and sell as many devices as possible.
    Seriously, you will have to ask Apple. We are just users like you. You can contact Apple using the Contact Us link at the bottom of these pages. But I don't think you will get a response, but I may be wrong.

  • Has anyone developed a site for podcast in Muse?  If so what are the pro's and con's vs. using Wordpress?

    have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site.  I use BC for my sites.  Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

    one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
    However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
    This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
    There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
    Router-mode is easier to understand and troubleshoot.
    The CSM is just like a router with vlans and routing between each of these.
    It requires a minimum of configuration.
    However, it is important to design correctly.
    For example I would recommend not to have client accessing the CSM directly.
    They should go through the MSFC first.
    Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
    You never know which is active.
    The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
    Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
    This is a good solution.
    Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
    A little more complex to troubleshoot as well.
    Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
    Regards,
    Gilles

  • What are the Disadvantages of LSMW.

    What are the Disadvantages of LSMW?. Why BDC come into picture, even though there is LSMW. What is the main Difference between LSMW, BDC, BAPI ?.

    hi,
    <b>What are the Disadvantages of LSMW?.</b>
    I believe the problem on LSMW is the method to be used to load the data: if there are std methods (like BI or BAPI) there' no particular problem, but if there aren't you should register it, but sometimes these regitrations are not good and so you have to create an your own program.
    So if there are std methods or it needs a simple BDC obtainable by registration I prefer to use LSMW.
    <b>What is the main Difference between LSMW, BDC, BAPI ?.</b>
    LSMW creates a project to download the data in the system, several steps have to be implemented and it needs to have only few abap knowledge to implement them (the system'll generate all programs): only a good developer can create a bdc program.
    A project can be created directly in every enviroment, bdc has to be created in development system and transport from dev to prod.
    Every user can create a LSMW project, only developer can create a BDC program.
    LSMW is me to more flexible and adaptable than BDC if some modifications have to be added after creating it.
    <b><i>BAPI</i></b>
    BAPI stands for Business API(Application Program Interface).
    A BAPI is remotely enabled function module
    ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
    You can make your function module remotely enabled in attributes of Function module but
    A BAPI are standard SAP function modules provided by SAP for remote access.
    Also they are part of Businees Objest Repository(BOR).
    BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
    You create business objects and those are then registered in your BOR (Business Object Repository)
    which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
    In this case u only specify the business object and its method from external system
    in BAPI there is no direct system call. while RFC are direct system call.
    Some BAPIs provide basic functions and can be used for most SAP business object types.
    These BAPIs should be implemented the same for all business object types.
    Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
    Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
    rgds
    anver

  • How to know what are the T Codes used by client in SAP HR module in  qualit

    hi experts,
    i have a access of quality server given by my client in SAP HR.I dont know what are the Tcodes used by client.So how i can know what are the Tcodes client is using frequently.i have to list out all TCodes urgently.
    PLZ reply ASAP.
    Thanx in advance..

    Hi
    You can do this by going to SUIM-Transactions-Executable for User
    Then give the user name/id as in user master record and execute.  Now the system will display the list of transaction codes used by that particular user.
    Regards
    Santhosh.S

  • What are the installer(setups) I need to install for webcenter Portal

    I use a 32bit laptop now and I want to start working on webcenter portal. What are the applications I need to install in order so I can successfully get my webcenter working. I already have installed Jdeveloper 11.1.1.6.0
    Thanks

    This depends on what exactly you mean by 'my webcenter'.
    If all you want is develop your own webcenter applications (using the WebCenter Framework), you might be good to go only with the webcenter jdev plug-in (see http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml#oracle.webcenter.app). Your apps will be deployed to the integrated WLS. There will be two important missing pieces:
    a) WebCenter Content as the document storage (requires also a database)
    b) BPEL/BPM as the workflow engine
    You might also want to install WebCenter Portal: Spaces, or deploy your apps to a separate WebCenter Portal server (running on its own Weblogic Server).
    Optionally, you might also want to utilize other servers contained in the WebCenter Portal license such as Secure Enterprise Search for enterprise searching and/or Oracle Access Manager for enabling single sign-on between the above mentioned components.

  • What are the daily activities of a BW Consultant - In brief?

    What are the daily activities of a BW Consultant - In brief?
    What are the daily activities that an consultant has to perform when he is in Implementation and Support?
    E.g :
    <b>For Implementation</b>
    1.Creating Business Requirement document
    2.Creating Blueprint and Business Process document
    3.Creating Functional and Technical Spec
    4.Identifying Authorization Objects
    5.Designing InfoCube,ODS,Reports, Process Chains etc
    6.Transport of Objects across system Landscape
    7.Unit & Integration Testing
    8.End-User Training
    9.Go-Live
    Could anyone please categorize the above according to the ASAP 5 phases.
    Project Prepration,Business Blueprint,Reliazation,Final Prepration & Go-Live and Support
    <b>For Support</b>
    1. Daily/weekly/monthly data load monitoring
    2. Performance Tuning on the BW System in various areas
    3. New Development / Changes in the existing objects such as reports , process Chains etc.
    4. Chaning the data load conditions (0FISCYEAR,0CALMONTH etc)
    5. Tracing and fixing the errors during the data loads
    If anyone can give me detailed information about the above and other support issues will be highly appreciated.
    [email protected]
    Thanks
    Regards,
    Moon

    HI
    RSA3
    SE12 / SE16/ any custom T-Code for viewing tables
    RSA7
    SM37
    SM12
    SBIW-To Fill the set up table
    LBWG-To delete Setup table
    LBWQ-To check the Queue
    SE11 to view Table
    RSO2-To view Generic Datasource
    RSA6-To check the Extract Structure.
    RSA7-To check the Queue and to Trigger Delta Repetation
    CMOD - User Exit Enhancements
    SE19 - BAdI Implementations
    SE24 - Class Buider
    SE37 - ABAP Function Modules
    SE38 - ABAP Editor
    SE01 and SE03 - Transport Organizer
    ST22 - ABAP Dump Analysis
    SNOTE - OSS Note Implmentation
    Regards
    KP

  • What are the available extract structure

    hi all
    i have to generate a report for sales . i want to know what are the extract structure for sales.
    and also let  me know what are the standard cube for sales.
    and how can i find them.
    thanks in advance

    You question is too generic it would better if you can precise
    Check in R/3 - LBWE - > LO Cokpit you can expand nodes for SD  to see their Extract structures
    Sales -Application 11
    Shipping - 12
    Billing     - 13
    Refer help
    http://help.sap.com/saphelp_nw04/helpdata/en/71/1769372b2b7d20e10000009b38f842/frameset.htm

Maybe you are looking for