I have already posted this question once already but I can't find it! I'm using a Mac, using OS 10.4.11, I keep getting notifictions to upgrade to 3.6.22, however, your site says that they are NOT compatible; what doI do now?
I did ask this question before, about a week - week and a half ago. However, it had not received any answers after about 4 days. My browser crashed and I lost the page!
Anyway, I keep getting notifications indicating that I need to download update 3.6.22. This site says that it is NOT to be used with OS X 10.4.11. So, what's the real deal? can I, better yet - should I download and use 3.6.22?
Additionally, what are we supposed to do when, as the notification on this site states, that 3.6 is only temporary, when it is what taken out of usability status? ?
I'm running a G4 DP, 500 MHz, with 512 MB RAM. I'm using an Earthlink dial-up account.
DOES anybody have an answer to the above questions? Do you need any additional information?
ole_pirate
Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.
Similar Messages
-
I thought it was an issue between my son and I but I just tried someone else and it also doesn't work. So???PLEASE HELP!! Thank You. I am using the latest iPad - the 3? And aim trying to contact iPhone 3 users and iPod users.
At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
I have a Macbook Pro and have just purchased a GSP hidden objects game. It says on the box that it is compatible and when I try and install it it tells me that installation has been successful. However, it then says that PowerPC games not supported. Help?
No game icon appears on my desktop and I don't know what I can do.
Really ****** off as i've not played these games since switching from a windows PC to a Mac and was really excited!! All I want is to be able to play my new game that arrived in the post today. If anyone can help I would be really really grateful....
The game says that it needs Mac OS X 10.3 or higher to run so I don't understand what the problem is or how I can fix it!!beckyj3,
the last version of Mac OS X which supported running PowerPC apps on Intel Macs was Mac OS X 10.6.8 (Snow Leopard). If you’d like to play this PowerPC game on your Intel MacBook Pro, then you’ll need to install Snow Leopard on it and boot into Snow Leopard. (Note that the last MacBook Pro which natively supported Snow Leopard was the Early 2011 model.)
The game was almost certainly published before Mac OS X 10.7 (Lion) was released, so back then, all versions of “Mac OS X 10.3 or higher” would have supported running that PowerPC game. -
Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid! HOW can a code I am getting directly from apple be invalid!!!!!!!! Seems like your system has A LOT of flaws.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?
Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
4th time I am trying to post this question!!! Why can't I watch season 5 episode 9 of Downton Abbey?? I have purchased a season pass and have watched all previous episodes. I can't watch on any of my devices. iMAC - iPad 3rd gen. - iPhone5
What happens when you try to watch it ?
-
itunes songs won't populate in the audio browser for slideshow. Says that they are loading but after 2 hours I gave up. How do I fix this challenge?
Can you access the iTunes Library in other app? IPhoto? IMovie? If not, then I'd bring that to the iTunes forum
-
my sound won't work on my ipod 5. I plugged the speakers in and it works fine. When the headphones aren't plugged in and I turn the volume up it says that they are plugged in. Please help !
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. (this was already sugested) There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
I can't find my notes in my iCloud account. I checked my iPhone 4, and it says that they are still being saved to the iCloud. Where did they go?
I'm not familiar with the PC end of things, but in a recent post I read about someone using notes.exe to access notes (I'm assuming they knew what they were talking about) - would your installation of icloud app(s) include a notes program? At least do this, log into icloud.com with a computer browser and look in mail. There should be a notes "folder" listed along with the others you may have defined. Are you notes there? If not, that's the problem. Be sure notes is turned on in Settings>icloud on your device. if they are there, then it looks like the PC end is the problem - but I can't provide help concerning that.
-
Macintosh Clients keep saying that they are up to date when they are not!!
All My Macs keep saying that they are up to date when looking at the local SUS server. There not up to date and there are loads of updates that are downloading onto the SUS, do I have to wait for the updates to finish downloading before the cleints can get their updates?
Hi
When inspecting the updates in the Service GUI do they have a light blue circle by the side of the update? If they don't they've not been downloaded yet.
Depending on your internet connection and bandwidth it can take up to 3 days (sometimes longer) to download them all. Once downloaded they should be available assuming everything else is configured as it should be. By this I mean, as a minimum, a correctly configured DNS Service that does not involve the use of .local for the domain suffix.
HTH?
Tony -
How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library. -
Will not allow add-ons,says that they are corrupted
will not allow add-ons,says that they are corrupted
You are running a no longer supported Firefox Firefox 4.0b12 version.<br />
Please update Firefox to the latest version via "Help > Check for Updates or Help > About Firefox"
You can find the latest Firefox release here:
*Firefox 9.0.x: http://www.mozilla.com/en-US/firefox/all.html
*http://kb.mozillazine.org/Installing_Firefox#Linux
See also:
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.com/kb/Unable+to+install+add-ons -
I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?
Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
Hi ! How to identify a 2.0 usb on the Mac mini because I was told that they are not all 2.0
Someone knows how to identify the usb 2.0 on a mac mini because I use the mini just for music and I have been told that they are not all 2.0.
Actually, you can have a mixture of USB2.0 and USB 3.0 devices on the 2012 Mini's. USB3.0 devices will operate at 3.0 speed and USB2.0 devices will operate at 2.0 speed. It all depends which device is plugged in first not the slowest speed device. So, if a USB3.0 device is plugged in first, it will use SuperSpeed and USB2.0 devices will use High-Speed. If a USB2.0 device is plugged in first, ALL devices (3.0 and 2.0) will operate at High-Speed (USB2.0).
In the System Information under USB there are two types of USB hubs. One is USB High-Speed Bus which will show the USB2.0 devices. Another is USB SuperSpeed Bus which shows the USB3.0 devices. You can see your devices under each Bus.
Below is from this Apple Link:
How do I get the best performance from the USB 3 ports?
The first device you plug in will configure the port, so always connect USB 3 capable hubs or devices first.
What happens if I plug in a USB 2 device into the USB 3 port first?
If you plug in a USB 2 hub first, all devices connected or "daisy-chained" to that hub will operate up to the maximum transfer rate of USB 2 speed (480 Mbps).
Maybe you are looking for
-
I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped wo
-
How create a carrosel photo gallery with Adobe Muse widgets?
I use Adobe Muse 3.2 build 2, and I need create a photo gallery with many photos (around 60) like a carrosel (with photos and thumbnails that slides both from left to right). There is some way to create or insert a widget of this kind in Muse? If pos
-
Object Level Security,Data Level Security&Row level Security
can anyone explain main difference between "Object Level Security,Data Level Security & Row Level Security " and how to implement. Thanks in advance, Kumar
-
Is it possible to add more space to a 16GB device?
is it possible to add more space to a 16GB device?
-
I used to be able to right click on an unwanted image and remove it, but as I updated to a newer version of Firefox the feature no longer works. What other option exists?