I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

I think that we all know the answer to this one.
Unfortunatley the device is concidered damaged by water. Apple can do an out of warranty repair which would cost $199. Generally they would just replace the device in this case for the $199.
The alternative is to Purchase a new device.

Similar Messages

TS2972 the homesharing on my apple tv works for about 5 minutes then stops working

I had to have my the hard drive on my computer reformatted and then reload all the programs. Since then when I pull up pictures on my TV through Homesharing, it works for about 5 minutes and then disconnects. I have extended the time until the screen saver comes on and the time for the computer to go to sleep, but it does not seem to make any difference.
Any ideas?
Thanks,

Hello, Paul.
Thank you for visiting Apple Support Communities.
If your Apple TV powers off while in use, a restore may be needed. Here are the steps on how to restore your Apple TV.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
There are also some helpful troubleshooting steps in this article as well.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If the issue persists, I would recommend reaching out to us by clicking here.
Cheers,
Jason H.

Multicast works for a day and then stops

I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons. It works consistently on 3 out of 6 WLAN's. And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing. I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC. 2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan. I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day. I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning. It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on. It started doing this after upgrading to 7.0.240.0. We have very little amount of multicast traffic on wireless, and low channel utilization. It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates. When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller. It shouldn't be wired config related since it's unicast mode. I've tried with and without broadcasting enabled. Any ideas?

Okay, so I discovered two things, but I still don't know what caused this problem. When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug. This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day. When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day. So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast.
What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power). This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again. Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those. I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again. Or maybe reboot after changing EAP-Broadcast Key interval.

My macbook air wont change songs when for itunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minute then stop working again. Did i change a settting? what should i do?

My macbook air wont change songs for iTunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minutes then stop working again. Did i change a setting? what should i do?

Hello King Cutway
If you are having issues with the functions keys, then check the settings in System Preferences > Keyboard and look to see if Use all F1, F2, etc. keys as standard function keys is unchecked so you can use it properly.
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/HT1296
Regards,
-Norm G.

I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do?

I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do? edit

This problem can be solved selecting manually the video resolution.

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only t

The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667

http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

Hi Forum, can u please help? iRecently bought a mac pro & my garageband 11 was working fine but now it's showing a question mark in the dock but it won't open. I think it may have been accidentally trashed. I've searched the trash & spotlighted. What now?

Hi Forum, can u please help? iRecently bought a macbook pro and garageband 11 was working fine but now it's showing a question mark in the dock and it won't open. I think it may have been accidentally trashed. I've searched the trash and spotlighted but don't know what to do next. Any ideas? Thanks.

How did you install GarageBand on your Mac? Did it come preinstalled with the other iLife applications?
If your MacOS supports the AppStore, you should be able to redownload GarageBand from the AppStore, see this support Article: OS X: About OS X Recovery on how to download again:
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie

Exchange Admin Center 2013 SP1 worked for a day and then stopped working, possible OAB problems

Here is a problem that has me confused. On a fresh Windows Server 2012 R2, I installed Exchange 2013 SP1. It was successful and for the first day everything was working well. I then installed all security updates. The next day, I could no longer log in to
the Outlook Web App or Exchange Admin Center. I get the generic "something went wrong" message, and the only details are X-FEServer: LAKEVIEW-SERVER (our server name). Nothing else. In the event viewer, I have the logs below every time I try to log
in. This is repeatable. Every time I attempt to log in the same 3 things appear in the Application Log.
Event 1003, MSExchange Front End HTTP Proxy [Oab] An internal server error occurred. The unhandled exception was: System.Configuration.ConfigurationErrorsException: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Event 4999, MSExchange Common Watson report about to be sent for process id: 2460 (IIS Worker Process, w3wp.exe), with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangeOABAppPool, System.Web, S.W.C.HandlerFactoryCache.GetHandlerType,
S.Configuration.ConfigurationErrorsException, e0bc, 04.00.30319.34009. ErrorReportingEnabled: True
Event 1310, ASP.NET 4.0.30319.0 Event code: 3008 Event message: A configuration error has occurred. Event time: 5/8/2014 9:46:45 AM Event time (UTC): 5/8/2014 4:46:45 PM Event ID: 2c98a65728a7475db0212291e3934ab7
Event sequence: 19 Event occurrence: 9 Event detail code: 0 Application information:     Application domain: /LM/W3SVC/1/ROOT/OAB-1-130440407246522811     Trust level: Full     Application Virtual Path: /OAB
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\OAB\     Machine name: LAKEVIEW-SERVER Process information:     Process ID: 2460 (IIS Worker Process, w3wp.exe)
    Process name: w3wp.exe     Account name: NT AUTHORITY\SYSTEM Exception information:     Exception type: ConfigurationErrorsException     Exception message: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Request information:     Request URL: https://localhost:443/OAB/     Request path: /OAB/     User host address: ::1     User:     Is authenticated: False     Authentication
Type:     Thread account name: NT AUTHORITY\SYSTEM Thread information:     Thread ID: 18     Thread account name: NT AUTHORITY\SYSTEM     Is impersonating: False     Stack
trace:    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String type)
at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
My first guess is to reset the Outlook Address Book by using the Remove-OabVirtualDirectory Exchange commandlet. But I am not so sure this will work because Exchange worked for a day. Any help understanding what caused the problem (and thus help avoid it
happening again) and how to fix it are appreciated. Thanks.

hi,
If nothing works try resetting the Virtual Directories.
For owa
Open Exchange Management Shell (EMS), and then run the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication:
set-Owavirtualdirectory -identity "MBX\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false
-Formsauthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For ECP
Start Windows PowerShell.
Type the following commands, and then press Enter after each line:
Add-PSSnapin *exchange*
Set-EcpVirtualDirectory -Identity "MBX\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For Ref: http://technet.microsoft.com/en-us/library/bb123752(v=exchg.150).aspx
I did those commands. But remember, the original error I gave was related to the OAB virtual directory, not ECP or OWA. I also did the Remove-EcpVirtualDirectory, Remove-OabVirtualDirectory, and Remove-OwaVirtualDirectory commandlets and the corresponding
EcpVirtualDirectoryOabOwaVirtualDirecoty ones. I still cannot log in to the Exchange Admin Center. And I still have the same original generic unhelpful error message.
However, there are some changes. After I removed and re-added the virtual directories I no longer received the original error logs given above. I now get this log in the event viewer:
Event 2001, MSExchange Front End HTTP Proxy
[Owa] Failed to load SSL certificate.
The first logs I gave above always appeared after attempting to log in. This log that I gave appears infrequently and is not connected to any log in events. This log occurs only
after a similar log given below:
Event 1001, MSExchange Front End HTTP Proxy
[Owa] Application Starting.

Itunes worked for about 30min. and then quit working, now it says there is a problem and shuts down. TGried uninstal and reinstall but it does the same thing. Will not run.

I am running Windows 8.1 and installed itunes and it worked fine for about 30min. and then icloud started and the itunes and icloud just quit. Tried to run itunes again but got a message "a problem occured and needs to shut down" then it shuts down. I have tried reinstalling but get the same problem. Tried uninstalling and reinstlling but it does the same thing.

I am running Windows 8.1 and installed itunes and it worked fine for about 30min. and then icloud started and the itunes and icloud just quit. Tried to run itunes again but got a message "a problem occured and needs to shut down" then it shuts down. I have tried reinstalling but get the same problem. Tried uninstalling and reinstlling but it does the same thing.

Airport Extreme worked for 2 days and now wont

3 days ago I wasted $600 on an Airport Extreme, 500Gb external drive, and the family pack of leopard excepting to use time machine with the shared airport disk. I quickly realized that wont work, maybe they'll fix it one day. What really ***** though is that my wireless connection was working perfectly for 2 days and then just died. Last night i boot up my macbook and get the network not found message. I entered my info manually and got it to connect, but it was extremely slow loading my homepage and then the connection simply stopped working. This is happening on both my brand new black macbook with leopard installed, and my fairly new white macbook that is still running tiger. I've reset the airport a few times and still the same results.
Did i get a defective router? I think i can still return it under apple's (supposed) return policy, should i just return it and go back to my reliable linksys g band router?
Thanks in advance.

Yes, following your advice i opened up the iMac and made sure it was well in place. It deem seem a little loose, but, it was still in the socket. After trying this, it still does not pick up the signal.
Any other ideas?
It just seemed to stop working , all of a sudden, !
I have noticed other people with similar problems,,
Thanks for any advice you can give me
Lara

HT1588 when i play a movie in itunes the audio will work for a little bit then stop

when i play a movie in itunes the audio will work for a little bit then stop

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W.

DSL Not Working for 7 Days and Tickets Closed without Resolution - Worst Customer Service

My DSL light has been blinking for 7 days. A technician came out Monday and checked inside my house and outside. He said the problem is outside, that there is an issue with the wires on the street. He said that the "Home Office" needs to internally switch the wires. The technician went to the "Home Office" which is right down the street but the technician was not at her desk so he put in a request for the wire to be switched. In the meantime, he manually switched the wires to get the internet working but said the internet would go down for 5-10 minutes when the "Home Office" did the official switch. When I got home from work, my internet was not working and my DSL light was blinking again. I immediately called Verizon and was told that my ticket had been closed and that a technician would need to come out again. Since the technician had already been in my house that morning and confirmed the issue was with the wires on the street and not my house, I told them no one would be home because I could not take another day off from work. It was understood that the technician could reach me by cell phone if he needed to talk to me but he was coming to look at the wires on the street. A visit was scheduled for the next day, Tuesday. I received a voice mail from the technician that he would be at my house in 20 minutes and would call me when he arrived. I never heard back from him and when I got home, my internet was still down. I immediately called Verizon to check on the status of the ticket. At first, the agent couldn't even locate my ticket but then informed me it was closed. I questioned the closure of the ticket since the problem had not been resolved. I then proceeded to be on hold for an HOUR while the agent tried to find out why the ticket had been closed. After an hour, the response was he didn't know and that I would have to open another ticket for an agent to come out AGAIN. The agent then insisted I needed to be home because the technician needed to check inside the house despite being told by me that the technician had already been in my house the day before and confirmed the problem was on the street. The agent then told me I needed to be home so the technician could update me. I told the agent the technician could call me on my cell phone since he clearly has the phone number since he called me on Monday AND Tuesday. The agent agreed and I gave my cell phone number again for the technician to call me. There are no appointments available until Thursday which will be 8 days since the internet went down. At this point, after 3 tickets opened, two that were closed without the problem being solved and two site visits with a third scheduled and 60 minutes on the phone,I am doubtful the issue will be resolved Thursday. I've reached the point where if the problem isn't fixed on Thursday, I am canceling my service with Verizon after six years. I shouldn't be paying for service that Verizon can't even provide because their own technician can't fix an issue with the wires outside my house.
This experience has been frustrating and the worst customer service I've ever experienced.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

My new IPad 2 mini its dead. Cant be on. Its working for two days and now I cant make it on. How and what I need to do?

I got new I Pod 2. Two days was working perfect. At the one moment it was off. Now I cant make it on. Its dead. Can you help me?

Make an appointment at your local apple store and have them look at it.
Have you tried to charge it? Plugged into the wall with the supplied power brick. If the battery is dead it'll remain off until it gets enough power to turn on.
So before you try the apple store you can try plugging it in, maybe over night, and see if that helps. If that doesn't, make the appointment and let the pros look at it.

Why is my new wifi not working, it did work for a few hrs then stopped

This is beyond a joke, the wifi box purchased on Saturday last week finally started working yesterday, after a faulty SIM card was replaced, we waited 24hrs and it it was activated, I used it once to check the speed and 10 minutes later I've a red 4G led on and no connection. What's going on, we paid for one months service and its cut off 3 days later ? Come on EE turn it back on. I'm far from happy.

Other than the obvious things like a very low battery, I would try a simply restart. That sometimes clears things up.
I would next look at software I just installed. I once got a free piece of software that did something like enlarge the size of the cursor, but somehow it did what you are describing to my mouse movements. It went away when I totally deleted the software.
I have also, once, gotten gunk in the "eye" of the laser of the mouse, and the problem went away when I cleaned it.
Oh, there are surfaces that it will balk at working on, but you probably haven't changed that.
Hugh

I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

Similar Messages

Maybe you are looking for