I have an iPod touch 5 16 gb and I have heard that it has airplay but it not showing up what do I do?
Hi guys so I have an iPod touch 5 16 gb and I'm very confused? I have heard ipod 5 has airplay but on my iPod touch i don't see like an airplay icon! Please help me because I'm very confused! I know my name is IPOD_GENIUS but I'm not a genius on this though! Lol thanks for the help maybe this can help someone else too!
If you have both a device that supports AirPlay, and the iPod has Bluetooth turned on, then it should appear in Control Center (swipe up from bottom).
If you are talking about AirDROP, then in Control Center, the AirDrop button is right below the volume controls. (This AirDrop only works with other iOS 7 devices with AirDrop enabled, not Macs). I have tested this feature, and it works fine.
Similar Messages
-
hello.
i have a ipod touch 4 and i have being putting in the correct password for it but it keeps saying it's wrong. now it is telling me to connect to itunes but itunes does not work on my computer.
i need this problem fixed ASAP because i use my ipod for my uni studys..
thank you alice walsh.Place it in recovery mode by:
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes -
I have a ipod touch 3G and I have ios 4.3.3 and under about I don't have the system hardware update! what can I do?
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I have an Ipod Touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?
It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty. You can transfer your iTunes purchases from your iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod. If you had the iPod backup file you could restore from backup.
If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
Best iPod to PC -
I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?
If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
I have a iPod touch 4 and updated the iOS 6 and always when I try to search for an app in the App Store it won't let me because it always exits the App Store. Why is this happening?
Have you tried resetting and restoring your iPod?
-
i have a ipod touch 4gen and whenever i sync it, i just lose all my memory... and im also trying to restore my memory but don't really know how... how do i do it?
Only sync chosen songs. Even with that I had a bad song once that was corrupted and it blew the ipod touch's mind. Can't remember how I found the song, but deleted it off the computer and was able to get a fresh copy off this quite old CD. Also, settings-general-usage, you can see which files are gathering up in your memory. There are some surprisingly large programs.
-
I have an ipod touch 4g and the center button is sinked... How do i fix it?
i have an ipod touch 4g and the center button is sinked... How do i fix it?
If not under warranty try:
FIX for iPod Touch Home Button: Apple Support Communities
If under warranty, make an appointment at the Genius Bar of an Apple store. -
TS2771 I have the iPod Touch 2G and for some reason half of my apps won't work.
I have the iPod Touch 2G and for some reason half of my apps won't work.
- Reset the iPod, nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- The remaining items of:
iOS: Troubleshooting applications purchased from the App Store
- Last, restore the iPod -
I have an iPod touch 3g and I want to know if iI can get ios 4.3 because now I have ios 4.2.1 and I can't have a lot of app.?
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
vinayakfrommonroe wrote:
I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
Hi: Check out the Apple article below.
https://discussions.apple.com/message/15112985#15112985
Stedman -
I have an Ipod touch 6 and can't updated apps. When I click update, nothing happen. Any clue?
I have an Ipod touch 6 and can't updated apps. When I click update, nothing happen. Any clue?
Thanks,There is no iPod Touch 6. The latest generation is iPod Touch 5. Perhaps you mean you have an iPod running iOS 6.1.6. If so, you have a 4th generation iPod which cannot update past 6.1.6. A 5th generation iPod can run iOS 7
-
I have an IPOD touch 4g and upgraded to 6.1.3. I can not download the Podcast App. Help please.
I have an IPOD touch 4g and upgraded to 6.1.3. I can not download the Podcast App. Help please.
Listen to podcasts with Music app on iOS 6 - Mac OS X Hints
▶ How to Re-enable Podcasts in iOS 6 - YouTube -
Hello, I have an ipod touch 2g and I can not download the application or change the version. made for me a solution please. and thank you
The hardware on the 2G does not support an iOS version higher than 4.2.1. If you want apps that require a higher version you will need to get a newer model iPod.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.
Maybe you are looking for
-
Cust cust account relate Import
Hi, we are facing issue when the calling this api for the update the customer account relationship to Active. We passed the CUST_ACCOUNT_ID, RELATED_CUST_ACCOUNT_ID and status = 'A' . HZ_CUST_ACCOUNT_V2PUB.update_cust_acct_relate( p_init_msg_list =>
-
Material to mat. conversion with diff. quantities
hI, Material A having 10 pieces, I want, material to material conversion with different quantity, Ex- Mat B = 12 Pieces. Mat A 10 Pieces conversionin to Mat B 12 Pieces Can any body Tell me which MVtyp should USe. The Valuation of Both Materials is
-
Repeat loop in filemaker Pro 7 database
How can I get my script to loop through a large FM database of records and change the data in a particular field as in the script below? I cannot figure out the syntax for the repeat loop... with timeout of "3000" seconds tell application "FileMaker
-
Something wrong in writing a new file
Hello, I'm new to Java and I seem to have trouble in writing a string to a file. Here is the code: void show_seat() try BufferedWriter tr=new BufferedWriter(new FileWriter("try.txt")); for(int i=0;i<5;i++)
-
Hi, I am using Oracle JDeveloper 11g Release 1. Can you please tell me how to write automated test cases for XQuery. I found one tutorial on net (http://oracamp.com/automatic-xquery-unit-tests-osb-projects-0), tried executing the same steps as mentio