I have an iTouch and iPad. The iPad holds a lot more stuff. How can I differentially sync both so I don't have as much on the iTouch and I get to choose what goes on it?

I have an iTouch and iPad. The iPad holds a lot more stuff. How can I differentially sync both so I don't have as much on the iTouch and I get to choose what goes on it?

When you connect your iTouch to iTunes, open the device by clicking on the iTough button on the left of the screen (do this after you've backed it up).  Then when open, you can go into apps, music, photos, etc and check or uncheck whatever you want on your iTough.  The same applies to your iPad.  After backup, you open the device and check what you want on the iPad.

Similar Messages

  • My husband registered an iphone in his name and have given it to me. I have an ipad registered in my name.  How can I change the iphone to my name and sync both devices.

    My husband registered an iphone in his name and have given it to me. I have an Ipad registered in my name.  How can I change the Iphone from his apple id to my name and sync both devices.

    You can create up to 3 alias addresses but you have to do this on icloud.com from your computer browser.  This article explains how: http://support.apple.com/kb/PH2622.  Also, incoming email to an alias address will go to your current iCloud inbox so it really isn't a separate account; just a different email address for the same account. 
    Each iCloud account only has a single iCloud email account.  If you really want to set up another, you would need to add a secondary iCloud account by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud, then entering a different Apple ID to create the account.  You can then turn on Mail to create the new account.  Mail in secondary accounts, however, is fetch email, not push (which is only supported in the primary account).

  • I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
    http://support.apple.com/kb/HT1365
    For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
    I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
    Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

  • I have two iPhones and an iPad under same Apple ID. How can I change one of the iPhones to a separate id?

    I have 2 iPhones & an iPad under 1 Apple ID. How can I change 1 of the iPhones to a separate account?

    Sign out of the Apple ID on the device in question, making sure to disable the Find My iDevice feature.
    Sign in with the new Apple ID.
    If the intent is to sell the device, simply restore as new after disabling the Find My iDevice and signing out.

  • HT2305 I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unloc

    I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.

    Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.

  • How can I re-sync my iPhone and iPad after accidentally deleting my iTunes library (without losing all of the apps on my devices)?

    Long story short: A sequence of bad decisions on my part caused me to delete my entire iTunes library (song files, apps, itl file, everything in the music folder).  Another bad decision left me without a Time Machine backup of this folder. I have a backup of my music and I can redownload audiobooks from Audible, so I'm not stressed out about my audio.
    The problem is my iPhone and iPad. I've downloaded >400 apps and have over 100 on each device. How can I begin syncing them to this new, app-free library without having every app deleted (along with their organization, settings and related-documents). I use these devices heavily so this is a huge conundrum for me.
    The next step would seem to be to restore my audio files to a new iTunes library, but how do I then sync my devices to that library without wiping out every app on my iDevices?  I'm a pretty technical user and am willing to hand edit the ITL files if necessary.  I think that i _may_ be able to find a version of the itl file that's about a year old from an ancient backup. But that still doesn't solve the whole problem.
    Thank you,
    Spencer

    I managed to lose an earlier reply I'd started before you came back with your "solved" so I didn't bother to retype it.
    It went something like this:
    You should be able to recover the media with the tips in  this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into an authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup.
    The older .itl file is useful however as iTunes should see this as the "home" library for your device which will allow you to preserve the application settings. (.itl file? Mac? I assume the library has migrated from PC to Mac at some point). Any files in the Previous iTunes Libraries folder or did you kill those as well? The most recent of these would be the best place to start.
    And no, the .itl file is not editable by mortals...
    Once you've restored the media from backups or recovered whatever else you useful can from the device, the scripts MusicFolder Files Not Added and Super Remove Dead Tracks should help get the library up to speed with the contents of the media folder.
    tt2

  • HT1386 Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

    Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

    You might find useful information in item D1 of Time Machine Troubleshooting.

  • I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on

    I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on

    Is your iPhone not showing up in iTunes sidebar, or is iTunes not just launching automatically?
    The things that you can check are:
    1) Launch iTunes manually
    2) Restart or reset your iPhone (http://support.apple.com/kb/ts3281)
    3) Check your cable including disconnecting and reconnecting it on bot the phone end and the computer USB end.
    4) Reboot your computer
    5) As a last resort, take it to the Apple Store so they can check the hardware

  • I have Elements 12. I can not use the "zoom burst effect". I the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part og´f the picture the whole picture imidiatly gets sharp. What is wrong?

    I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

    I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

  • HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

    Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
    Documents say
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
    But I can't see my iPad Mini in iTunes.
    And my  Ipad  (Settings, General, iTunes Wifi Sinc)  shows  a message :" Sync will resume when xxx(my PC with iTunes) is available "...
    Both are in the same network,
      Ipad mini is is plugged in to power
    . iTunes is open on the computer
    what can i Do ???

    Hi Skydiver119,  and tks for four interest.
    I have done exactly as you say, but it does not work for me.
    You indicated  " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
    I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
    I disconnect the wire,
    and my iPad disappears from my iTunes screen.
    in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
    So, I can not sync via wi-fi
    I appreciate if you can help me.

  • HT201365 Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

    Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

    In v6 airport utility "Join a wireless network" is not available once the TC is setup.
    You must reset to factory and try again using the selection options.. and it can fail or not come up.. This is an extremely poor way to setup a TC.. and you should NEVER EVER DO IT.. that is why apple removed it. Since you are joining wireless it makes no difference where the TC is located.. since it would become a dumb AP and turn off its ethernet ports.
    Place it right next to your main modem router, plug in by ethernet, and select bridge mode and create a wireless network. Never use Join a wireless network..
    However for completeness here is the method.
    How do I setup my time capsule with wireless internet?
    Never ever do it.
    If you need internet by wireless and backup to the TC.. then simply plug the TC directly into the Mac.
    Run dual network.. Setup explained here.
    Using Time Capsule hardwired to Mac for back-up only.

  • I have bought a new ipad wifi/3g 32gb in india. how can i activate 3g on ipad

    i have bought a new ipad wifi/3g 32gb in india. how can i activate 3g on ipad

    I assume you have a working microSIM already inserted in your iPad...
    To activate it maybe the following link will help you:
    http://www.ipadforums.net/ipad-help/21452-3g-usa-ipad-troubleshooting-edge-netwo rk-india.html

  • I am running after effects CC on window 8 whenever I render a video the audio is misplaced. does everyone know whats going on?

    HI, I am running after effects CC on window 8 whenever I render a video the audio is misplaced. does everyone know whats going on?

    Nope.  We don't even know what you mean by "misplaced".
    Is it not there?
    Is the audio somewhere else in a different folder?
    Is the audio there, but leads or follows the video by a certain amount?
    Other things:
    Have you activated the audio checkbox in the Output Module when you add the comp ro the Render Queue?
    Is there audio present in your comp when you RAM Preview?

  • My system preferences has gone frozen and im not computer savvy whats going on peeps ??

    my system preferences has gone frozen and im not computer savvy whats going on peeps ??

    Welcome to the Apple Support Communities
    Open  > Force Quit and close System Preferences. Then, it should work correctly

Maybe you are looking for

  • Problems while uploading Task List - Service Pack with LSMW

    We are trying to upload General Maintenance Task List using LSMW. We are using Standard Batch/Direct Input method with Object 0490. We need to upload task list header, operations, maintenance pack, component and service pack for operations. We have c

  • IPhone picks up Notes address /o=SCD/ou=FOXASIA/cn= etc... from Outlook

    I am trying to trouble shoot just one small problem with iPhone Contact sync with Exchange... [Otherwise, Sync works just fine with Outlook 2003] Contacts are captured from the Exchange Server Global Address Book to my Contacts in Outlook 2003, then

  • How to generate an addon

    addons are generated manually how to genarate addons automatically. waiting for u r reply Comment: Please put clear subjects for your questions. You have several posts with the "sap b1" subject... Thanks. Edited by: Moderator on Mar 20, 2008 11:43 AM

  • Apps greyed out

    I have an iPad that I used with my Windows machine and iTunes. Syncing worked fine. I now have a new iMac (yea), but when I connect my iPad to iTunes on the iMac click my iPad device name and Apps at the top all of the Apps appear on the screen excep

  • Adobe Flash for Windows x64

    Is their a genuine reason why this still isn't out.  I got thinking that if this was a Microsoft product Flash x64 would be out not long after Windows XP 64 bit came out but no years later we're still waiting on Adobe. I'm sure I can't be the only on