I have an OLD PowerBook G3 and it won't work now.
I have aquired an old PowerBook G3 400 Mhz with FireWire and it has been sitting collection dust for quite a while. It will not turn on at all. I have the batter in the left bay and the right bay has nothing, not weight saver or anything in it, and it is plugged in over ac. I have tried 2 power adapters, an apple one and a 3rd party one. The computer does not do anything, no lights or noises. The lights on the battery don't light up either. Does anyone know what could be the problem?
Thanks
Start with this article:
50959- Troubleshooting portables that won't turn on or start up
If none of those helps, remove the main battery and try the list again. Operating without a battery may be helpful for bench testing, but your powerbook is intended to run with a battery in place. Without a battery, it may be more likely to sustain damage due to power fluctuations. If the main battery does not recharge itself, it may be dead and require replacement.
The PowerBook also has a recharging PRAM backup battery (unlike the iBook which has only the main battery). You may have to leave it plugged in overnight (without the main battery in place) or longer before it has any hope of recharging the PRAM backup battery. If the PRAM backup battery does not recharge, it may be dead. It is more convenient to have a working PRAM battery for daily use.
Similar Messages
-
I have an old Powerbook G4 and need to install iTunes, which version do I use?
I have an old Powerbook G4 and need to install iTunes, which version do I use? Where would I find this version?
iTunes 9.2.1 is the last version that would run on Mac OS X 10.4:
http://support.apple.com/kb/DL1056
Regards. -
The headphone jack on my macbook air isn't working. I have plugged in two headphones and both won't work although they do work on other devices. Any ideas on how to resolve this problem?
update to latest OSX 10.9.3
reset SMC , you likely put your Air into sleep mode with phones attached.
update the OSX to fix the issue. -
I need a help !!! Please ,I dropped my iPhone 5 in toilet and I didn't get fast maybe 5mins before I get it because I didn't notice drop it and it won't work now it's almost 1week I'm waiting it still it don't work ... But when I plug my charger it goes light and show up apple logo and die again I don't know what to do and it's so expensive here at Japan pls.. Help maybe there still way to get it work again
Thank you ,ReanAt this point it's clear that it's been damaged and will need to be take or sent to Apple for replacement.
Regards. -
Why?
I assume it's the Video app that now won't work at all - if it's the iPad then try the second option below.
Have you tried closing the Videos app completely ? From the home screen (i.e. not with the Videos app 'open' on-screen)double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have an iBook G4. My epson stylus printer is not fixable so I went to Best buy and bought an XP 400 (Epson). When I went to set it up it wouldn't talk to my computer. So it looks great but won't print After 2 days and many phone calls I am disgruntled to say the least. Any suggestions?
I would imagine the drivers supplied with the printer will not be compatible with your existing operating system.
Download the older drivers for your OS here, and then try the install again.
Epson Print Drivers -
I reactivated my phone and it won't work now
hi all
when i just got my phone, my friend actiavted it for me and it was always on his name, although i went to change the name and it reactivated itself it will now not work for me its saying that the activation server is temp unavailable, (this is doing that hours now) p.s i dont have itunes so im relying on wifi for this problem
can anyone helpWhen your friend set it up he hacked the phone. While it isn't illegal, it violates the contract with Apple and they will no longer honor the warranty or provide support for the phone. See: Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…
-
is anyone there?
Do you have access to your developer account? You are running a beta version on your iPhone and will need to fix it through that site. If you are not a developer but were legitimately beta testing for someone you need to contact them for a fix.
If you are using an unauthorized beta you need to put your iPhone in DFU mode and Restore it as a new iPhone in iTunes and hope it works. -
I downloaded amazon program but when I try to run amazon videos I get an error message that my internet is running http proxy and it won't work> Now what?
Check this post: https://discussions.apple.com/thread/2778443?start=0&tstart=0
-
Hey i have a old powerbook G4 laptop and i was wondering where can i download the OS ( Mac OSX 10.5.8 Build ( 9L30 ) to do a fresh install my system is running really slow is there any place where i can down load this OS?
Hello,
Unfortunately Apple do not offer a download for mac OS X 10.5.8. They will only provide updates available for download. ( Normally you would do so once the OS is installed)
To do a fresh install of this software your going to need to buy a retail copy of the disk.
There are some vendors who do still stock the media disk, but they can be expensive.
Best of luck. -
Can I go directly to Snow Leopard from Tiger 10.4.11? I have an old powerbook g4
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
Cheers, Tom -
HT1533 I have an old PowerBook G4 I installed a new drive how do I load the new OS
I have an old PowerBook G4 I installed a new hard drive how do I load in the OS
You'll need the Original system discs that came with your system when you bought it or a Upgrade DVD for a newer version of OSX that you bought and installed over the top of the original version. Either should boot the system and allow you to install that version of OS X.
But you will still need the original Applications DVD to reinstall the iLife Apps.
If you do not have them you can order a Replacement set from Apple for a small charge.
To boot the system from a DVD you can either hold down the C key when starting the system, that tells the system to boot from the DVD drive, or hold down the Option key when starting and that will bring up the Boot Menu screen where you select the DVD/DVD drive as the Boot source. -
I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.
iOS: Unable to update or restore
-
hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help
Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine. -
I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password, how do i activate the songs
Welcome to the Apple Community.
The following article(s) may help you.
Look up your old and forgotten Apple ID
Maybe you are looking for
-
How do you add multiple facebook accounts to iPhoto
I'm trying to add more then one account and I don't see how you can.
-
I have one app that does not show up in Launchpad
I have one app, the game Diablo II, that still shows up in my Applications folder as it always has but does not show up in Launchpad when I pull that up in Lion. All of my other apps are there in Launchpad... but not this one. Any idea how I make a
-
I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?
-
10.4.7 and monitor failure after boot up
10.4.7 again. I have some strange experience with my core duo mini, after installing the 10.4.7 update. After the boot procedure I get a blank grey screen with some flashing in every seconds on my Xerox LCD display. It looks like the monitor is on "e
-
Java Runtime.exec - can you read the output interactively?
I am running a program never ends, its a text based download manager. It gives output on ONE line, and this isnt in std.out (im using unix). this continues (basically it just gives you a view of how much progress the file is downloading. Is there a w