I have disabled pop ups in my iphone but still i could n't connect to my college wifi.. It shows the error message  as ensure whether the pop ups are not blocked.. pls help

Hai..
I have disabled block pop up in my iphone 5s.. but still i couldn't connect my mobile with my college wifi.. it shows the error message as "ensure all the pop ups are not blocked"....

You might want to talk to the IT dept. at your school to see if they know of a solution.

Similar Messages

  • Help! My iPhone 4 can not be switched on as it went off while updating. The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!

    The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!

    Hey!
    I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
    SIGHHH.

  • Some of the songs I have downloaded onto i tunes won't play when I select it to do so.  The error message I get is "The song could not be used because the original file could not be found.  Would you like to locate it?"  How can I get my songs to play?

    Some of the songs I have downloaded into i tunes won't play when I select it to do so.  The error message I get is "The song can not be used because the original file can not be found.  Would you like to locate it?"  When I select yes I'm sent to a screen that has my i tunes library listed.  When I select the song in question I'm asked if I would like to open the song.  When I select this option I get nothing.  The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to.  I can't the songs to play however.  This is not true of all of my songs but it is true of quite a few of them.  Actually, one song is too many.    How do I get my music to play that seems to be locked up somewhere in the computer?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.

    Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.  I have changed the permissions to everyone and it doesn't work

    Any suggestions please?

  • I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • HT1933 I have tried everything including reseting my iPhone but still can't connect to App Store, and it's been over a week now! Totally annoyed now!!

    I have tried everything including reseting my iPhone5c but still can't connect to App Store, and it's been over a week now! Totally annoyed now!! I'm not sure if it started after I updated my iOS cos I was able to update a few other apps. I just can't connect to neither apps store nor iTunes! I need help else I'd boil this phone alive!

    Hello IamJudekow,
    Thank you for the details of the issue you are experiencing with connecting to the App Store on your iPhone 5c.  I found a couple of articles I recommend for this issue.
    First, I recommend using the steps in the section titled “Troubleshoot issues on an iPhone, iPad, or iPod touch” in the following article (the article title refers to the iTunes Store, but the steps are relevant for the App Store as well):
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If the issue persists after following the steps in that section, I recommend continuing with the steps in the section titled “Isolate the issue: (Mac OS X, Windows, iOS)” in the article below:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly. help?

    when i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly after i sign back in. help?

    hi,
    Mac, iPhone, iPad, iPod Touch ?
    Do they appear eventually ?
    The iMessages are "pushed" to the devices which means there can be small delays between the server recognising the device went Off Line and coming back.
    10:19 pm      Thursday; July 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Why is it that every udate of my iPhone software do I get the error message on my laptop: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

    Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
    I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?

    This is the fix I got from discussions and it worked for me.  It is copied below.  I just did the manual fix which I have underlined. Good luck! Regards, Belle.
    This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
    There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
    However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
    If it isn't, though, here's the manual fix:-
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.
    I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
    I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

  • I have updated my iphone 4 and all of my music has been removed from my iphone but still in my itunes. How can i get my music back because when i sync none of the music goes back across?

    Problems with syncing.. Anyone help?

    This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

  • I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

    When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

    Ah, see, you said you had done it differently before.
    > and I tried to add a toolbox button by navigating to AcroPDF.dll.
    You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
    Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

  • Photoshop Elements4 won't open in OS10.9 - error message PowerPC applications no longer supported... have deleted the plist but still no joy..., Photoshop Elements4 won't open in OS10.9 - error message PowerPC applications no longer supported... have dele

    Can anyone help? have searched so many threads but nothing works... and app so old that I think that I downloaded it...

    Hi Karynry,
    I am afraid you will not be able to use Photoshop Elements 4 on Mac 10.9.
    Photoshop Elements 4 is only supported on Mac 10.3 and 10.4.
    You can refer to below link for system requirements
    System requirements | Adobe Photoshop Elements
    Thanks

  • OK,only just recently have had a prob.here w/FF when i goto FF i get the error message "XULRunner" saying : Platforum version 1.9.2 not compatable with MinVersion 1.9.2 / MaxVersion 1.9.2 . I have uninstalled and reinstalled FF and still get the same mess

    Running Windows XP 32bit
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 3.0.04506.30; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

    I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
    Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
    Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
    How do I fix this?

    Hi there scarbo59,
    You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below. 
    iOS: Unable to import photos to computer
    -Griff W. 

  • I upgraded my iphone os to 4.01 and i have not been able to synce to my computer. The erros message I get says the Iphone connected is not recognised what can i do to solve this problem.

    i upgraded my iphone os to 4.01 and i have not been able to sync to my computer. The error message I get says the Iphone connected is not recognised what can i do to solve this problem.

    Did you try to connect in recovery mode? iOS: Unable to update or restore
    Also check here: iOS: Device not recognized in iTunes for Windows
    And make sure your security software is set up right: iTunes for Windows: Troubleshooting security software issues

  • Error message "Can't open the illustration." - HELP

    I work for a small company in the product development area and we use AI every day, all day. We work on PCs (windows 7) in AI CS6 design standard.
    About a week and a half ago, I got the error message "Can't open the illustration." I then proceeded to recreate my file that was lost, once saved and closed, the same error message popped up after trying to reopen. The file was recreated by another person, and the same error message occurred. This has now happened to 5 of my files and a handful of files created by coworkers.
    The error seems to be completely random, as we have been able to create other files without a glitch. The other odd thing, is that the one person who uses a mac in our creative department was able to open our 'lost' files as single pages on her AI CS4.
    Please help!
    Thank you.

    We have tried both saving the files on our company server and on our individual desktops - neither of which will open the files.
    Fonts are ok - they are all created and saved in CS6.
    Printers, I believe are all correctly set up.
    We tried a complete reinstall on one PC - still running into the same random files ending up 'lost' with the same error message.
    Originally, the cs6 design standards (6 licenses total) were loaded to the server/shared drive and then downloaded onto each PC from there - we believe this may have something to do with the corruption, but this problem has just begun within the last month and the programs were all downloaded over 6 months ago.

Maybe you are looking for

  • Upgrading from 32 bit to 64 bit windows 7

    I have a 32 bit system with windows 7 home premium on it. i have the ff. question and i hope someone can provide me some answers: 1. My laptop is 64bit enabled, can i use the oem os key at the back of my laptop to install the win7 home premium 64 bit

  • Ask about UTL_FILE in Stored Procedure

    Hi I was trying to do an insert in a table which then trigger a stored procedure to write the inserted data to a text file. However, I have some issues here in the Stored Procedure. Thanks for trying to help... [Insert -> Table -> Trigger -> Stored P

  • How to find table name for a structure field

    There is a field in contract display screen (VA43). Item overview tab. The name of the field is Value released (RV45A-AWERT). Can anybody let me know the name of the table and field that has this value. I have to display this value in a custom report

  • Unit test runs perfectly fine with NUnit but fails when run from TestExplorer

    Hello all, I have a TestProject, Harmony.Tests. In there, I have a method AddApplicationEvent() which calls another method Send(InvokeRequestMessage requestMessage) which calls a webservice (OperationHandlerBrokerWebService).  The code snippet looks

  • 9i Standby without dataguard

    Hi all. Oracle 9i ( SE ) I'm trying to figure out how to create a standby database without dataguard. I've read that its possible, but I can't find any documentation on exactly how to do it. From what I've gathered I should be able to Create a duplic