I have doubt in Selection Screen

Hi all.
I was created Dialogue screen as a initial screen 9000. after that i changed 1000 as initial screen (Selection screen),Moved 9000 as second screen,i have some application tool bar in selection screen 1000.it is displaying when iam execute my program without transaction code.but it does not display when i execute programe by Transaction code,i was given screen no 1000 for t-code.
Regards,
Jay

Hi Jay,
Although i am not fully clear of the situation..please try the following suggestions that may prove useful..
1) for dummy sake try creating a new Tcode with dialog (option 1) again and see it you can achieve the desired output by running it...if not you can delete the new tcode you have created
Reason : Creating a fresh Tcode may put an end to your problem because i guess that you may have created the tcode first and reassigned the screens later......
2) try the "set PF status" code written in the module...if possible debugg in the Tcode and direct execute version marking the "Set PF status" as break point..
I am sure you can come up with something there...
ReAson : Last resort of any ABAPer is the debugger...
Regards
BX
"Happy New Year"

Similar Messages

Doubt in selection screen

Hi i have a doubt in selection screen I had given statement as below now i can see the output screen and i'm getting the output also now i want to know the value of only one vendor. If i had given a vendor number it must select the particular data of that vendor only can u give me any suggestions please
SELECTION-SCREEN BEGIN OF BLOCK P WITH FRAME TITLE TEXT-000.
 PARAMETERS: VENDORNO like EKKo-LIFNR,
 PURORG like EKKO-EKORG,
 PLANT like EKPO-WERKS,
 PURDOC like EKKO-BEDAT.
SELECTION-SCREEN END OF BLOCK P.

Hi Pavan,
I think this is what u required when u select vendor number automatically for that particular vendor u require values in the remaining 3 parameter fields.

REPORT zex31 .
PARAMETERS: vendorno LIKE ekko-lifnr,
 purorg LIKE ekko-ekorg,
 plant LIKE ekpo-werks,
 purdoc LIKE ekko-bedat.
DATA: dynfields TYPE TABLE OF dynpread WITH HEADER LINE.
DATA: return TYPE TABLE OF ddshretval WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR vendorno.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'EKKO'
 fieldname = 'LIFNR'
 dynpprog = sy-cprog
 dynpnr = sy-dynnr
 dynprofield = 'VENDORNO'
 TABLES
 return_tab = return
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
BREAK-POINT.
REFRESH dynfields.
READ TABLE return WITH KEY fieldname = 'VENDORNO'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
APPEND dynfields.
Get the company code from db and add to dynpro
DATA: xekko TYPE ekko,
 xekpo TYPE ekpo.
CLEAR xekko.
CLEAR xekpo.
SELECT SINGLE * INTO xekko
FROM ekko
WHERE lifnr = return-fieldval.
dynfields-fieldname = 'PURORG'.
dynfields-fieldvalue = xekko-ekorg.
APPEND dynfields.
dynfields-fieldname = 'PURDOC'.
dynfields-fieldvalue = xekko-bedat.
APPEND dynfields.
SELECT SINGLE * INTO xekpo
 FROM ekpo
 WHERE ebeln = xekko-ebeln.
dynfields-fieldname = 'PLANT'.
dynfields-fieldvalue = xekpo-werks.
APPEND dynfields.
Update the dynpro values.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = sy-cprog
 dynumb = sy-dynnr
 TABLES
 dynpfields = dynfields
 EXCEPTIONS
 OTHERS = 8.
START-OF-SELECTION.

TO HAVE USER DEFINED SELECTION SCREEN USING LOGICAL DATABASE AFI

AFI is the logical database i need to use, but if i include the AFI is the program attributes, i get the selection screen which is already there for AFI, but i need to get the selection screen, that i have defined

Hi ,
you can exclude sel. from ldb with
loop at screen - statement
and you can include your own sel-option and parameters
regards Andreas

Unable to have field in selection screen of Infopackage

Hello Gurus,
I have a small problem,
I am unable to bring on field in selection screen in Infopackage,
even thou the object is ticket in DataSources selection option,
I have noted that the object is of type DEC is it something to do with,
Or is their any other way to have this object in selection screen of Infopackage,
Please help me on this,
Thanks & Regards,

Bhanu its field type is DEC thats why its not coming in selection screen in Infopackage .This is a big problem in our Development as this field is SPRIO(Procurement Priority) and we want to restrict this field with conduction SPRIO EQ 1.
Our DataSource is based on Infoset , Bhanu is it possible to restrict this Field in Infoset writing some code. As their is option in Infoset for CODE we tried this but didnt work.
or any other way to restrict this field with 1.
I really appreciate your reply.
Thanks Once again.

Doubt with selection screen

Hi all!
I have to show the inspection lot details (QA32) as per the requirements given in the selection screen.
In my selection screen , I should have select option for Inspection lot created date(QALS-ENSTEHDAT) and lot created time (QALS-ENTSTEZEIT). I would like to know the lots created from yesterday evening till today morning.
When I give the values 09.02.2008 to 10.02.2008 for date and 17:30:00 to 10:00:00 for time , it'll obviously intimate that 'From- time is greater than To- time'.Is there any way to relate the From-date to From-time and To-date to To-time in the selection screen , so that my problem will be solved.Please help with possible code.
Edited by: Jayasri P. on Feb 9, 2008 5:55 AM

Hi,
try this.........
TABLES qals.
DATA it_qals TYPE TABLE OF qals WITH HEADER LINE.
SELECT-OPTIONS   s_date FOR qals-enstehdat NO-EXTENSION.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN comment (10)   for field p_timel.
SELECTION-SCREEN POSITION 35.
PARAMETERS       p_timel LIKE qals-entstezeit.
SELECTION-SCREEN comment 54(2) for field p_timeh.
SELECTION-SCREEN POSITION 60.
PARAMETERS       p_timeh LIKE qals-entstezeit.
SELECTION-SCREEN END   OF LINE.
SELECT *
FROM   qals
INTO   TABLE it_qals
WHERE enstehdat IN s_date.
IF sy-subrc IS INITIAL.
SORT it_qals BY enstehdat entstezeit.
LOOP AT it_qals WHERE enstehdat EQ s_date-low
                  OR    enstehdat EQ s_date-high.
    CASE it_qals-enstehdat.
      WHEN s_date-low.
        IF it_qals-entstezeit LT p_timel.
          DELETE it_qals.
        ENDIF.
      WHEN s_date-high.
        IF it_qals-entstezeit GT p_timeh.
          DELETE it_qals.
        ENDIF.
    ENDCASE.
ENDLOOP.
ENDIF.
LOOP AT it_qals.
WRITE : / it_qals-enstehdat ,it_qals-entstezeit.
ENDLOOP.
also goto selection text and give descriptionas below..
P_TIMEH     to
P_TIMEL     Time
S_DATE     Date
Cheers,
jose.

Doubt in Selection-Screen for Program type "Function Group"

Hi Gurus,
I created a Function group in that i created one screen and writtem the Screen flow logic. In that screen I called a Function module "COMPLEX_SELECTIONS_DIALOG" For Creating a selection-Screen.
The code snippet is like below.
CASE ok_code .
    WHEN c_clk1.
      CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
     EXPORTING
       title                   = text-002
       text                    = 'Material Number'
       signed                  = 'X'
        lower_case              = ' '
        no_interval_check       = ' '
         just_display            = ' '          " Un commented by Srihari
         just_incl               = 'X'          " Un commented by Srihari
        excluded_options        =
        description             =
        help_field              =
        search_help             =
       tab_and_field           = st_tab
      TABLES
        range                   = r_matnr
     EXCEPTIONS
       no_range_tab            = 1
       cancelled               = 2
       internal_error          = 3
       invalid_fieldname       = 4
       OTHERS                  = 5.
it works fine. But the problem is if i click the multiple selection button for the select-option in selection screen and enter the values and copy those value. In the multiple selection button green button is not coming like noram report selection-screen. Please remember I used the program type as "Function Group" not "Module Pool".
Please send your suggestions.
Thanks,
Srihari.

Ok, I am not 100% sure, if I understand you correctly, you said, you created one screen to 'simulate' a standard selection screen behavior without using select-options statement?
If that's not correct, could you please post a few more details on what exactly you are doing.
I had to 'simulate' a select-option behavior which I did as follows:
- I created a range variable to store the values (s_ctby)
- on the screen I defined the LOW (s_ctby-low), HIGH (s_ctby-high) and the multiple selection field pushbutton
- In the PBO I set the icons for the multiple selection pushbutton
READ TABLE s_ctby INDEX 2 TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    gv_createby = gc_icon_enter_data.
ELSE.
    gv_createby = gc_icon_disp_data.
ENDIF.
- In the PBO make sure that any values entered on the screen are transferred to the range
* transfer any changed values into the correct range for user transaction
* (screen 0110) because that screen just 'simulates' a selection screen
* so we have to make sure that any data the user enters in the selection
* fields is passed into the appropriate ranges
IF sy-tcode EQ gc_trans_user.
*   created by
    IF NOT s_ctby-high IS INITIAL.
      s_ctby-sign   = c_i.
      s_ctby-option = c_bt.
      IF s_ctby[] IS INITIAL.
        INSERT s_ctby INDEX 1.
      ELSE.
        MODIFY s_ctby INDEX 1.
      ENDIF.
    ELSEIF NOT s_ctby-low IS INITIAL AND
               s_ctby-high IS INITIAL.
      s_ctby-sign   = c_i.
      s_ctby-option = c_eq.
      IF s_ctby[] IS INITIAL.
        INSERT s_ctby INDEX 1.
      ELSE.
        MODIFY s_ctby INDEX 1.
      ENDIF.
    ELSEIF s_ctby-low IS INITIAL AND
           s_ctby-high IS INITIAL.
      DELETE s_ctby INDEX 1.
    ENDIF.
- If the user hits the multiple selection pushbutton
    WHEN gc_fc_create_by.
*     if the user hits the multiple selection button on the screen
*     we call the standard SAP functionality to show the multiple
*     selection popup SAP uses on a standard selection screen
      CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
        EXPORTING
          title             = text-t02
        TABLES
          range             = s_ctby
        EXCEPTIONS
          no_range_tab      = 1
          cancelled         = 2
          internal_error    = 3
          invalid_fieldname = 4
          OTHERS            = 5.
      IF sy-subrc NE 0 AND NOT sy-msgty IS INITIAL.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
*     now update the header line so the screen fields display the correct values
      CLEAR s_ctby.
      READ TABLE s_ctby INDEX 1.
Hope that helps,
Michael

Doubt in selection screen modification

Hi all,
I have a Checkbox (select all) in my selection screen and 23 other check boxes.
When i click the 'select all' checkbox, all the 23 checkboxes should be selected automatically in the selection screen and the lf i remove the tick mark in the checkbox, all the 23 check boxes should be cleared automatically and it should allow the user to select any of the checkboxes on his own..
I'm able to select all, when it is ticked.   But my pbm is when the 'select all' tick mark is removed, i'm clearing all the 23 checkboxes.   so after this, if the user a select any check box on his own, it is not taken. Bcoz, i'm clearing all the value in 'at selection screen' event.
Could any one help to achieve this ...
Regards,
Shanthi

Hi Shanti,
Here is the modified code of the fellow SDN. Just check. It works as u requested.
REPORT zvenkat_notepad.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS:p_all AS CHECKBOX USER-COMMAND rusr.
SELECTION-SCREEN : END OF BLOCK blk1.
SELECTION-SCREEN : BEGIN OF BLOCK blk2 WITH FRAME.
PARAMETERS: p_chk1 AS CHECKBOX,
            p_chk2 AS CHECKBOX,
            p_chk3 AS CHECKBOX,
            p_chk4 AS CHECKBOX,
            p_chk5 AS CHECKBOX,
            p_chk6 AS CHECKBOX,
            p_chk7 AS CHECKBOX,
            p_chk8 AS CHECKBOX,
            p_chk9 AS CHECKBOX,
            p_chk10 AS CHECKBOX,
            p_chk11 AS CHECKBOX,
            p_chk12 AS CHECKBOX,
            p_chk13 AS CHECKBOX,
            p_chk14 AS CHECKBOX,
            p_chk15 AS CHECKBOX,
            p_chk16 AS CHECKBOX,
            p_chk17 AS CHECKBOX,
            p_chk18 AS CHECKBOX,
            p_chk19 AS CHECKBOX,
            p_chk20 AS CHECKBOX,
            p_chk21 AS CHECKBOX,
            p_chk22 AS CHECKBOX,
            p_chk23 AS CHECKBOX.
SELECTION-SCREEN : END OF BLOCK blk2.
AT SELECTION-SCREEN." OUTPUT.
IF p_all = 'X'.
    p_chk1 = 'X'.
    p_chk2 = 'X'.
    p_chk3 = 'X'.
    p_chk4 = 'X'.
    p_chk5 = 'X'.
    p_chk6 = 'X'.
    p_chk7 = 'X'.
    p_chk8 = 'X'.
    p_chk9 = 'X'.
    p_chk10 = 'X'.
    p_chk11 = 'X'.
    p_chk12 = 'X'.
    p_chk13 = 'X'.
    p_chk14 = 'X'.
    p_chk15 = 'X'.
    p_chk16 = 'X'.
    p_chk17 = 'X'.
    p_chk18 = 'X'.
    p_chk19 = 'X'.
    p_chk20 = 'X'.
    p_chk21 = 'X'.
    p_chk22 = 'X'.
    p_chk23 = 'X'.
ENDIF.
IF sy-ucomm = 'RUSR' AND p_all = space.
    CLEAR:
          p_chk1,
          p_chk2,
          p_chk3,
          p_chk4,
          p_chk5,
          p_chk6,
          p_chk7,
          p_chk8,
          p_chk9,
          p_chk10,
          p_chk11,
          p_chk12,
          p_chk13,
          p_chk14,
          p_chk15,
          p_chk16,
          p_chk17,
          p_chk18,
          p_chk19,
          p_chk20,
          p_chk21,
          p_chk22,
          p_chk23.
ENDIF.
Regards,
Venkat.O

Is it possible to have two at selection-screen events in a program

Hi all,
 I have a selection screen wherein i am using i have 5 radiobuttons and 3 select-options and a parameter. I am trying to use two at selection-screen events
1) at selection-screen on radiobutton group rad1.
2) AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_STATUS.
the second event is not getting triggered.
I have to get certain values for the parameter p_status based on the radiobutton selected from an internal table(the field doesn't belong to any dictionary table i am filling an itab with some values based on the radiobutton selected) pls help. its urgent.
Regards
Tharanath

Hi
TYPES : BEGIN OF ST_OBJID_SH,
 OTYPE TYPE HRP1000-OTYPE,
 OBJID TYPE HRP1000-OBJID,
 END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
 SELECT OTYPE OBJID FROM HRP1000
 INTO TABLE IT_OBJID_SH
 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 DDIC_STRUCTURE = ' '
 RETFIELD = 'OBJID'
 PVALKEY = ' '
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'S_OBJID'
 STEPL = 0
 WINDOW_TITLE =
 VALUE = ' '
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = ' '
 DISPLAY = ' '
 CALLBACK_PROGRAM = ' '
 CALLBACK_FORM = ' '
 MARK_TAB =
 IMPORTING
 USER_RESET =
 TABLES
 VALUE_TAB = IT_OBJID_SH
 FIELD_TAB =
 RETURN_TAB = RETURN_TAB
 DYNPFLD_MAPPING =
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
Use in this way it will defently triggers
REward if usefull

Doubt on selection-screen

Hi gurus,
I done one report to get the Purchase order details. At the time of creating purchase order the users enters a One text field in the Purchase order header text of ME21N transaction. I need to fetch that field into Report. Upto this its fine. I also done this report by using the function module "READ_TEXT". The o/p is also generated successfully.
But now our client is asking, Please put that text field in selection-screen. Once he presses F4 in that field he needs to display all the values in text field. I know how to do if it is a table field. But it is a purchase order header text. Client enters different text when he creates diferent purchase orders.
Based on that text field only the report o/p will needs to display.
For example:
The User1 creats a Purchase order using ME21N. In that he enters Purchase order header text as ABC.
    when ever he creats a purchase order he enters only ABC.In this way he creats 100 Purchase orders.
if the user execute the report and in selection screen of that text field , suppose he gives a ABC, only those 100 purchase orders only needs to appear.
   Like this so many users enters no.of text items. Suppose there are 100 users. totally 100 text values will be there.
    once he presses F4 help on the selecton screen all 100 values need to display. And this is dynamic, the no may increase in future also. thats totally depends on Purcase orders.
Please guide me how to do this.
      Thanks in Advance...
Thanks and Regards
Siri........

hi frnd,
try like this
write the logic to fetch text fields into some internal table in
at selection-screen output event.
and pass this to selection-option as f4 using ...> call function 'F4IF_INT_TABLE_VALUE_REQUEST'.
ex
at selection-screen output.
use fm "READ_TEXT". and assign all values to one internal table
then
call function 'F4IF_INT_TABLE_VALUE_REQUEST'.
hope it may help u.
regards,
chandu

Hi friends i have doubt on select statement

hi friends, i am using one ztable which contains around 60 fields. i would like to consider in to itab around 52 fields. for this i am using "select * from ztable into itab....". can u please suggest me how can i improve by selecting all the fields and without reducing performance.

Declare as below:
Select-options: s_matnr FOR mara-matnr.
Data: Begin of itab.
INCLUDE STRUCTURE mara.
Data: End of itab.
Clear itab.
Refresh itab.
Select * from mara
into table itab
where matnr = s_matnr.
if sy-subrc = 0.
SORT itab.
endif.
OR if you are selecting based on some internal table then use
FO ALL ENTRIES IN itab1.
Hope this helps you, it will also improve your performance.
Reward points and close the thread else revert back.

Filter value for variable selection screen

Hi & help !,
This could be a tricky or an easy question, but it seems too hard for me !
I'm storing version in my cube, and have a report which shows informations for the version you select (with a variable = ZVERSION01).
ex : Version :
V01
V02
V03
V04
When report is executed i have my variable selection screen (for variable ZVERSION01) which give all version [V01 -> V04]. But i want users have no access to version V01 & V02.
Variable ZVERSION01 is "single selection", i tried to filter with Default Values screen or Characteristic Restriction screen but it doesn't work.
ex : caracterisitic restriction screen : VERSION = !V01 / !V02
default value screen : variable VERSION = ZVERSION01
Any idea?
Thx

Hi,
In BI 7.0 there is Anaylysis authorisation RSECADMIN transaction. That you can use here or normal role concept will also do.
What you need to do is grant authorisation to the users for V03 and 04 version only and create 'Authorisation' type variable on version in the query. (type of variable - it asks while creating the variable). This way users will only be able to see authorised versions only.
Note you have to make version infoobject as Authorisation relevent infoobject. ( in infoobject properties).
Let me knw if you have any doubt.
Regards,
Viren

Selection screen parameter

hi friends,
for the below given description i have to create selection screen parameter .
can u suggest how to solve this.
#times excess qty
Default value: If control class-pseudo no.1 = "NonCtrl then value = 3 Else value = 2. User able to change the default value.
regards,
siri.

HI Raj,
fromm the below PSEUDO CODE i have retrived ALNUM . but the values of this ALNUM has to be moved to the parameter in selction screen. my doubt is how can i do this one is in AT SELECTION SCREEN AND ONE IN DATA SELECTION IS IN START-OF-SELECTION.
1. Control Class: Write Ctr Vault if MAEX-ALNUM(export control class) = ("CNTROL2" or "CNTROL2N") and Write Ctrl Cage if MAEX-ALNUM = ("CNTROL3" or "CNTROL3N" or "CNTROL4" or "CNTROL5") else Write NonCtrl where MATNR=VBAP-MATNR and match with the user-specified input in selection criteria (see section 5).
REGARDS,
SIRI.

Reg SELECTION SCREEN BLCOK....

Hi,
I have one doubt regarding selection screen. i.e.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TILE TEXT-001.
SELECTION-SCREEN : END OF BLCOK B1.
The above syntax will give standard length of frame in SELECTION SCREEN but i want to customize it, I mean I want to decrease the size of frame as per requirement. So, How will I change the size of frame? regarding this plz give me example coding.
Regards,
Kishore.

refer
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9c2e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/56/1eb6c705ad11d2952f0000e8353423/content.htm
regards,
srinivas
*reward for useful answers*

Unable to retreive values from selection screen built using WDR_SELEC_OPTIO

Hi All,
I have created a selection screen as below
lr_field = wd_this->m_handler->create_range_table( 'YFMTFLOW' ).
* ASSIGN lr_field->* TO <fs_range>.
* ls_date-sign = 'I'.
* ls_date-option = 'EQ'.
* ls_date-low = 'US'.
* APPEND ls_date TO <fs_range>.
* Add the select-option to the group
wd_this->m_handler->add_selection_field(
 i_id = 'FLOW'
 i_within_block = 'PROC'
 i_no_intervals = abap_true
 it_result = lr_field ).
If i enter some value and click a button to retireve the values as below
DATA
 lt_sel_item TYPE if_wd_select_options=>tt_selection_screen_item.
types: ty_flow type range of yfmtflow.
FIELD-SYMBOLS:
 <fs_sel_item> LIKE LINE OF lt_sel_item,
 <fs_process> TYPE yfmtprocess,
 <fs_flow> TYPE ty_flow.
* Get the selection-screen items
l_handler->get_selection_screen_items(
 IMPORTING et_selection_screen_items = lt_sel_item ).
* Retrieve the values from the select-options items
LOOP AT lt_sel_item ASSIGNING <fs_sel_item>.
 CASE <fs_sel_item>-m_id.
 WHEN `PROCESS`.
 ASSIGN <fs_sel_item>-m_value->* TO <fs_process>.
 WHEN 'FLOW'.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_flow>.
 ENDCASE.
ENDLOOP.
<fs_flow> is empty
but after I enter value and then press enter and then click the button to retrieve the values I am able to get low value <fs_flow> not the sign and option
Is it the standard functionality ,if yes how can we overcome
Thanks
Bala Duvvuri

Am giving clear coding of select options.
nOTE: S_CARR_ID IS THE DATA ELEMENT OF CARR ID FIELD,
FOR THAT I AM APPLYING SELECT OPTIONS IN BELOW CODING.
WRITE THE BELOW CODE IN WDDOINT( ) METHOD OF
REQUIRED VIEW
Data: lt_range_table type ref to data,
 read_only type abap_bool.
WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS-
>WD_CPIFC_SELECT_OPTIONS( ).
WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS-
>INIT_SELECT_SCREEN( ).
WD_THIS->M_HANDLER->SET_GLOBAL_OPTIONS(
 I_DISPLAY_BTN_CANCEL = ABAP_FALSE
 I_DISPLAY_BTN_CHECK = ABAP_FALSE
 I_DISPLAY_BTN_RESET = ABAP_FALSE
 I_DISPLAY_BTN_EXECUTE = ABAP_FALSE ).
LT_RANGE_TABLE = WD_THIS->M_HANDLER-
>CREATE_RANGE_TABLE( I_TYPENAME = 'S_CARR_ID' ).
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
 I_ID = 'S_CARR_ID'
 IT_RESULT = LT_RANGE_TABLE
 I_READ_ONLY = READ_ONLY ).
BELOW CODE IN REQUIRED ACTION( SAY IN SOME BUTTON
ACTION WHICH WILL RETRIEVE THE DATA FROM DATABASE TABLE
USING SELECTI OPTIONS VALUES)
fIRST THE GET REFERENCE TO NODE( CTRL F7--->READ
CONTEXTB---FLIGHT NODE )
***THEN BELOW CODE
DATA: RT_CARRID TYPE REF TO DATA.
DATA:IS_FLIGHT TYPE TABLE OF SFLIGHT.
FIELD_SYMBOLS: <FS_CARRID> TYPE TABLE.
RT_CARRID = WD_THIS-> M_HANDLER-
>GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
ASSIGN RT_CARRID-> TO <FS_CARRID>.*
SELECT * INTO CORRRESPONDING FIELDS OF TABLE IS_FLIGHT
 FROM SFLIGHT WHERE CARRID IN <FS_CARRID>
NODE_FLIGHT->BIND_TABLE( IS_FLIGHT ).

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

I have doubt in Selection Screen

Similar Messages

Maybe you are looking for