I have exported a file as a custom mp4 (1gb) and the file i have been left with is 1kb, any ideas?

Hi everyone.
I made a 23minute edit of some gopro footage yesterday. Rendered the footage, then exported it as an h.264 file following a guide on youtube. I set the target and maximum bandwidth to 6 changed the level from 4 to 5.1 and i think that was pretty much it.
Clicked export, sure enough it took forever. The estimated file size was 1044mb. The exporting took around 3/3.5 hours. Then once i reached 100% the dialogue box disappeared, i navigated to the output location to find the mp4 file with the correct title but only 1kb large so it obviously won't play!
Any ideas on what went wrong and how i can fix it? I am a little bit devastated at the wasted time if not!
Thanks in advance for your time. I have some experience with Illustrator and PS through work but i have never used PP before.

Thanks for the reply Joe.
Is there any more info i can provide?
Would uploading the 1kb mp4 be of any help?
Also i am using CS6.

Similar Messages

In photos,events have lost dates and been replaced with IMPRT numbers.Any ideas?

In photos,events have lost dates and been replaced with IMPRT numbers

When is this going to be fixed?

HELP!!! 3Gs can't get imessage to work...have tried a few things that have been recommended: but nothing. any ideas?

Including all of this...still coming up as not delivered!
Please follow the steps:
1. Turn off the iMessage and FaceTime.
2. If your tel # are not yet addeded to your contact list please do so. Make sure that you select iPhone not mobile.
3. Change your My Info(Settings>Mail,Contacts,Calendar>My Info) by selecting your created contact.
4. Go to Setting>Phone. Check if your number is reflected in My Number. Then turn on your Show My Caller ID and also the International Assist.
5. make sure that your apple ID are login in Store under Settings.
6. Once your done, close all apps using the double tapping of home button.
7. Hard reset your iPhone.
8. After your iPhone boot. Check if you have Internet connection and then turn on your FaceTime then iMessage.
9. Activate by logging in your apple ID.
10. Done and enjoy the features of IOS5.

Is it off in Settings>Messages?
Is the Date & Time correct on your iPhone? if not, it won't be able to make secure connections.
Try testing on another Wi-Fi network.
See this Apple doc for a few more ideas -> iOS: Troubleshooting FaceTime and iMessage activation

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

TS1424 I keep getting a message that my ID has been disabled when trying to download an app. I have changed password I with apple. Any ideas what is wrong?

I keep getting a message that my ID has been disabled when trying to download an app. I have changed password with apple. Any ideas what is wrong?

If you've changed your password and it still shows disabled then try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do I open my raw files in Photoshop that have been shot with a Nikon D1700?

I can't open my raw images in Photoshop, I have updated Photoshop but it is still coming up with ...' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information'. The photos have been taken with a Nikon D1700

It means that you'll either have to use the Adobe DNG converter and convert your RAW files to DNG first, or upgrade to CS6, or use Lightroom to export (TIFF) to Photoshop.
I used the DNG converter for years before finally upgrading Photoshop. It was an extra step, but it just became part of my workflow - put card into reader, download RAW files, go grab a beer, batch convert to DNG, drink beer, edit in Photoshop. But had I known about how powerful Lightroom was I would have switched over to LR long before and just used that to export to Photoshop when necessary.

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

The dark bar is caused by the option "Show metadata below image".
Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
Regards
Léonie

Could not write to the file. It may have been opened with insufficient ...

Cannot add item to keychain with the above error
Is there a solution?
An error has occured. Unable to add an item to the current keychain.
Could not write to the file. It may have been opened with insufficient access privileges

Is there any more background information that you care to add to help enlighten us?

The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
Thanks in advance!
Error Message:
The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site: 9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
UCM version: 5.0.4.2000-1

Thanks for your reply. We have a lab environment where I maintain UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

[svn] 614: Deleted .orig files that shouldn't have been added with asc.

Revision: 614
Author: [email protected]
Date: 2008-02-21 18:06:38 -0800 (Thu, 21 Feb 2008)
Log Message:
Deleted .orig files that shouldn't have been added with asc.
Removed Paths:
flex/sdk/branches/3.0.x/modules/asc/bin/abcdump.exe.orig
flex/sdk/branches/3.0.x/modules/asc/bin/asc.exe.j.orig
flex/sdk/branches/3.0.x/modules/asc/bin/asc.exe.orig
flex/sdk/branches/3.0.x/modules/asc/bin/ash.exe.orig
flex/sdk/branches/3.0.x/modules/asc/build/java/lib/Regex.jar.orig
flex/sdk/branches/3.0.x/modules/asc/build/java/lib/bcel.jar.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/avmplus.exe.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/avmplus.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/errorGen.abc.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/genLocDiffs.abc.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/integrateLocDiffs.abc.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/lintWarningGen.abc.orig
flex/sdk/branches/3.0.x/modules/asc/build/util/normalizeXML.abc.orig

Try booting with your Shift (Safe Mode) key held down. See if that will repair the drive.
Or try running fsck.
1. Reboot/Startup holding your Command-S key down.
2. At the command line type the following and hit 'Return.'
/sbin/fsck -fy
3. If it finds a problem and repairs it, immediately run fsck again until the drive checks OK.
4. After it has check/repaired your disk, type 'reboot' and hit 'Return' again.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

MY computer crashed and I had to reload the operating system. I had purchased the export PDF. However, I had not back up since my purchase. The export no longer works, it just keeps circling and the message acts like it is doing it but it circles and

MY computer crashed and I had to reload the operating system. I had purchased the export PDF. However, I had not back up since my purchase and it is my understanding that this software is not stored on my computer. The export no longer works, it just keeps circling and the message acts like it is doing it but it circles and never completes. Msg says "uploading file to adobe exportPDF online"

Hi lisa99vano,
I'm sorry that your computer crashed. That's the worst. But, it shouldn't have affected ExportPDF, since that is an online service (provided you're using a supported web browser, and there's no firewall or proxy preventing ExportPDF from uploading). First, please make sure that you're using a supported web browser: http://www.adobe.com/acom/systemreqs/
Next, I think we should consider the file that you're trying to convert. How big is it? Had you tried converting it before the crash? Does it contain both text and graphics? Do other files convert without issue?
I look forward to hearing back from you with some specifics about the file.
Best,
Sara

My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

Click here: https://supportprofile.apple.com/MySupportProfile.do
SIgn in with your Apple ID, the same one you used to access this support forum.
Hopefully, you will see a list of all the devices you registered with your Apple ID, including their serial numbers. Let me know how this works out.
Edit to add: If you enabled "find my imac" on your Pro, you ought to be able to remotely lock it, or even wipe its memory. Click http://www.icloud.com/ sign in with your Apple ID and click the big green "find my iPhone" icon (nevermind the name, it will find all your devices provided they're running Lion or iOS 5).
Then file a police report and nail the b*****d.

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

I have exported a file as a custom mp4 (1gb) and the file i have been left with is 1kb, any ideas?

Similar Messages

Maybe you are looking for