I have just got a nano but as soon as i connectd to my pc it refused to load to to driver error 43 with the dvice. any ideas?
i have just installed i tunes and set everything up ready to sync my new nano for the first time but as soon as i conncted it, that was it it no longer worked. i was able to turn on the power and get the home screen but now it wont even turn on. it has also siad exactly the same thing on another pc so im pretty sure its the pod and not the laptop
in the device properties it is due to error 43 and i think it has 5.1 version of its software installed. any help would be great before i resort to sending it back
thanks in advance, stefan
no idea what happened or why but is now working just held every button on the ipod untill in shwed life again, tried to connect the same as before and now works.
confused but ohwell
Similar Messages
-
HT204053 Have just got iPhone 4S but can not face time to iPad please help
HAve just got iPhone 4S but can not face time to my iPad please help
Do you see your Outlook calendar on the iCloud website?
Do you see your iCloud calendar on your iPhone?
This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar -
I have just exported my vCard files from Outlook to import to iCloud and it will import because there was a problem reading my vCard. Any ideas welcome
Welcome to the Apple community.
Try exporting and importing them in small bundles, there may be a problem with one or more specific cards. If you are able to isolate them, you could then import those particular cards manually. -
I want to clean the HDD back to as new but have lost the disks that came with the Macbook Any ideas please
You will need either the system DVD's that came with the MacBook or a retail Snow Leopard DVD...
....call Apple Customer Service to replace your original DVD's ( $ and a serial# required).....1-800-676-2775 -
my macbook just started emiitting a beep every 10 secs or so which i appear only to be able to turn off by muteing the volume . any idea what it is and how i can make it cease ?
You showed a kernel panic file from OS X, apprantly Log Me In is installed into OS X or running when you log in.
You should be using the developers installer/unistaller to remove Log Me In from OS X.
Somehow it's in OS X, I don't know, but it's there and you need to remove it. I'm not dealing with Windows, just OS X.
Talk to Log Me In people and find out what is installed where so you can do a manual deletion out of OS X.
If that doesn't work, you have to reboot holding the Shift key down manually search for any Log Me In or Himachi files on your computer, in your System/Library/Extensions folder too, use the free Easy Find.
https://s3.amazonaws.com/DTWebsiteSupport/download/freeware/easyfind/4.9/EasyFin d.app.zip -
Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks
Apple can replace the battery for $79 US.
http://support.apple.com/kb/index?page=servicefaq&product=iphone -
Does anyone know why I can't see the HotSyncLog.htm file (after a HotSync) when Firefox is my default browser, but it comes up fine when I switch back to Internet Explorer? Thank you
Post relates to: Tungsten T5Hello!
This is a compatibility issue. The log is formated for IE support, not the Modzilla engine based browsers. If you do decide to make a non IE-based browser as default for your pc, you will need to right-click on the HotSyncLog.htm file and select Open With option to there select IE to check it out for Windows will keep going to Firefox.
Post relates to: Treo 650 (Unlocked GSM) -
Can anyone help me get back the options when I right click with my iphone with itunes that drop down menu has oly 3 features and none is what I want or need?
This happened since the last update.
GeoffI am facing the same problem, please help us ...
-
I just got my nano 6th generation, and i wonder if i use mi nike sport kit, i will have an improvement ?
For anyone following, I looked further into the tape cassette adapter and it seems to get the best reviews vs. FM transmitter. Guess there is a good reason that I have the last year model with a tape cassette. Worth mentioning is the Maxell one gets a better review than the Monter one. Not sure why, but it's cheaper. Anyone else find a good quality tape cassette adapter?
-
My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load
Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.
Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I have just got a iPad yesterday and I'm having a problem
I have just bought a tv series in iTunes and downloaded it on to my iPad but every time I go to watch it it comes up (could not load movie) then takes me back to the episode list ? Can you tell me how to solve this problem pleaseHave a look at the following:
http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1 -
Hi I have just got some wireless head phones and while using Bluetooth with my iPhone 4S the sound breaks up all the time but if I use a friends iPhone 5 or my iPad it's fine no problems atall! Any ideas what the problem could be people??????
Unpair the headset from the phone with the problem. Restart the phone (hold HOME and SLEEP until an Apple logo appears), the pair the headset again. Also, look for things nearby that may be causing interference in the Bluetooth band. Cordless phones are a common cause of interference.
-
I have just got my iPad and have created my Apple ID and it is asking me to verify my account and that it has been sent to my Apple ID address but I cannot find where I need to be to do this please help
I have my Apple ID but they sent verify to my personal email account which I went on the link but like I said when I try to use my iTunes or App Store it states I have not verified my apple id and I don't know what else to do
-
I have just got a Nikon D810 but CC wont open my raw file, can anyone help me please?
I have just got a Nikon D810 but CC wont open my raw file, can anyone help me please?
Ah ok shall try that now, thank you very much for your help
Maybe you are looking for
-
Process chain executed synchronously produces dump and hangs
Process chain (RSPC) being executed synchronously hangs on a step (not first) with yellow status. Analysis of ST22 shows there is dump: RAISE_EXCEPTION The chain loads data from flat files on frontend to several characteristics (attributes and texts)
-
Equipment Partner added but not in characteristic selection values
Hi, I want to ask some tips here because in the equipment master, a partner was added (as an operator) but when we try to add that partner as the driver (characteristic) it is not in the selection. What could be the possible causes of the data not fl
-
SOA 10.1.3.2.0 getUnsynchronizedCompleteInitializedTopology
Hi Guys I'm running a SOA 10.1.3.2 (plataform Sun Solaris intel) running on cluster using 2 nodes , I have raised this case with Oracle weeks ago but they havent figured out what's going on I would appreciate any feedback from you 08/01/22 10:28:50 W
-
SAProuter string in SAPlogon pad
Hi Team, I have read the posts and followed the steps for configuring the saprouter entry in the SAPGui. For some reasons, I am just not able to connect to my SAP system thru the SAPgui. These are the details of our connection SAProuter is installed
-
How do I transfer MP3 Audiobooks from Overdrive Media Console to my iPod?
How do I transfers mp3 audio books from overdrive media to my iPod on my Mac.?